I have created a Web application which runs on Apache using TWebModule. I have gotten a little "liberal" with the use of SendRedirect. In one case I found I was calling SendRedirect and following it up with another SendRedirect call - all in the same method handler. On my Test box, it would always redirect to the url of the first SendRedirect. But on my production box, I discovered (much to my chagrin) that it was redirecting the browser to the url of the 2nd redirect.
I know the "Real" answer is that I should not be calling multiple SendRedirects. But aside from that, does anyone have an explanation why in one environment it goes to the first SendRedirect while on another it goes to the 2nd?
Check Location: header you get. You probably have different rewrite rules, or some other appache configuration options set.
Related
Snip.ly nicely checks if the entered web address can be used in an iframe.
I'd like to replicate it in ruby. Looking through their code they send an ajax request to their server and thats where they do the validation.
Even after extensive googling couldn't find anything that could help me accomplish that.
My use case is that we let users add news listings to their page, which are shown in iframes, and would like to show it if the entered url can be used in an iframe.
You can figure out some cases by checking the X-Frame-Options header. But as you mentioned in the comments, it does not work all the time.
In my experience, it's best to side-step the problem altogether.
If you reverse-proxy your request through your rails server, then you can display pretty much anything all the time in your iframe.
Following is an example of the process. I'm assuming that your server is your-server.com and the user wants to list a page on user.com/list. The way it works would be:
Set an iframe's src to https://your-server.com/proxy?url=https://user.com/list`
Intercept the request, extract the url: https://user.com/list
Perform an HTTP request on https://user.com/list to fetch the content
Return it to the browser as if it come from your own server
This approach works pretty much all the time, but it then has other limitations:
- you should reverse proxy any asset on that page that has a relative url; otherwise the css/images may be broken
- you must handle ajax requests on that page
You can fix these as well, by transforming the html before step 4.
You could use https://github.com/waterlink/rack-reverse-proxy for step 2 and 3, instead of re-implementing your own reverse proxy.
You could set it up using the following code in config/application.rb:
config.middleware.insert(0, Rack::ReverseProxy) do
reverse_proxy_options timeout: 10 # avoids waiting for pages that take forever to load
reverse_proxy(/proxy\?url=(.*)/, '$1') # reverse proxy on the url parameter
end
Is there a way to mock requests when writing automated UI tests in Swift 2.0. As far as I am aware the UI tests should be independent of other functionality. Is there a way to mock the response from server requests in order to test the behaviour of the UI dependant on the response. For example, if the server is down, the UI tests should still run. Quick example, for login, mock if password failed then UI should show alert, however, if the login is successful the next page should be shown.
In its current implementation, this is not directly possible with UI Testing. The only interface the framework has directly to the code is through it's launch arguments/environment.
You can have the app look for a specific key or value in this context and switch up some functionality. For example, if the MOCK_REQUESTS key is set, inject a MockableHTTPClient instead of the real HTTPClient in your networking layer. I wrote about setting the parameters and NSHipster has an article on how to read them.
While not ideal, it is technically possible to accomplish what you are looking for with some legwork.
Here's a tutorial on stubbing network data for UI Testing I put together. It walks you through all of the steps you need to get this up and running.
If you are worried about the idea of mocks making it into a production environment for any reason, you can consider using a 3rd party solution like Charles Proxy.
Using the map local tool you can route calls from a specific endpoint to a local file on your machine. You can past plain text in your local file containing the response you want it to return. Per your example:
Your login hits endpoint yoursite.com/login
in Charles you using the map local tool you can route the calls hitting that endpoint to a file saved on your computer i.e mappedlocal.txt
mappedlocal.txt contains the following text
HTTP/1.1 404 Failed
When Charles is running and you hit this endpoint your response will come back with a 404 error.
You can also use another option in Charles called "map remote" and build an entire mock server which can handle calls and responses as you wish. This may not be exactly what you are looking for, but its an option that may help others, and its one I use myself.
When I check with Fiddler I see my new install of VS2013 is giving Continuous Signal R requests. I don't use anything to do with this in my application. How can I stop these requests which I assume are part of VS2013 trying to sync up something?
It's probably due to the BrowserLink feature mentioned here. BrowserLink uses SignalR to communicate between VS and your browsers.
Maybe log out of VisualStudio? It might also help if you tell us where VS is communicating to...
There seem to be two additional calls made by the browser-link:
a one off call made on a page render, on the same port as the site exchanging information about the mapping between Razor views and the elements. This call has __browserlink at the start of the URL.
a periodic call as part of the SignalR synchronisation. This has SignalR about 30 characters into the URL.
The former, a single call, I can live with. The other fills up my capture history.
To avoid this, in fiddler I've used the 'Hide the following Hosts' option in the Filter Tab and put something like localhost:62533 in the text box. Note that port number seems to change with each restart of VS2013.
As long as the 'Use Filters' is checked, I still see the traffic I want to (plus a one-off call for __browserlink).
So I have the following scenario (it's a Grails 2.1 app):
I have a Controller that can be accessed via //localhost:8080/myController
This controller in turn executes a call to another URL opening a connection using new URL("https://my.other.url").openConnection()
I want to capture the request so I can log the information
I have a Filter present in my web.xml already which does the job well for controllers mapped in my app. But as soon as a request is fired to an external URL, I don't get anything.
I understand that my filter will only be invoked to URLs inside my app, and that depends on my filter mapping which is fine.
I'm struggling to see how a solution inside the app is actually viable. I'm thinking of using a mixed approach with the DevOps team to capture such outgoing calls from the container and then log them into a separate file.
I guess my questions are:
Is there a way to do it inside the app itself?
Is the approach I'm planning a sensible one?
Cheers!
Any reason why you don't want to use http-builder? There a Grails plugin for it, and it makes remote XML calls much easier than handling the plumbing yourself. At the bottom of the linked page they describe how you can enable request logging via log4j configuration.
Let's say, on a ColdFusion site, that the user has navigated to
http://www.example.com/sub1/
The server-side code typically used to tell you what URL the user is at, looks like:
http://#cgi.server_name##cgi.script_name#?#cgi.query_string#
however, "cgi.script_name" automatically includes the default cfm file for that folder- eg, that code, when parsed and expanded, is going to show us "http://www.example.com/sub1/index.cfm"
So, whether the user is visiting sub1/index.cfm or sub1/, the "cgi.script_name" var is going to include that "index.cfm".
The question is, how does one figure out which URL the user actually visited? This question is mostly for SEO-purposes- It's often preferable to 301 redirect "/index.cfm" to "/" to make sure there's only one URL for any piece of content- Since this is mostly for the benefit of spiders, javascript isn't an appropriate solution in this case. Also, assume one does not have access to isapi_rewrite or mod_rewrite- The question is how to achieve this within ColdFusion, specifically.
I suppose this won't be possible.
If the client requests "GET /", it will be translated by the web server to "GET /{whatever-default-file-exists-fist}" before ColdFusion even gets invoked. (This is necessary for the web server to know that ColdFusion has to be invoked in the first place!)
From ColdFusion's (or any application server's) perspective, the client requested "GET /index.cfm", and that's what you see in #CGI#.
As you've pointed out yourself, it would be possible to make a distinction by using a URL-rewriting tool. Since you specifically excluded that path, I can only say that you're out of luck here.
Not sure that it is possible using CF only, but you can make the trick using webserver's URL rewriting -- if you're using them, of course.
For Apache it can look this way. Say, we're using following mod_rewrite rule:
RewriteRule ^page/([0-9]+)/?$
index.cfm?page=$1&noindex=yes [L]
Now when we're trying to access URL http://website.com/page/10/ CGI shows:
QUERY_STRING page=10&noindex=yes
See the idea? Think same thing is possible when using IIS.
Hope this helps.
I do not think this is possible in CF. From my understanding, the webserver (Apache, IIS, etc) determines what default page to show, and requests it from CF. Therefore, CF does not know what the actual called page is.
Sergii is right that you could use URL rewrting to do this. If that is not available to you, you could use the fact that a specific page is given precedence in the list of default pages.
Let's assume that default.htm is the first page in the list of default pages. Write a generic default.htm that automatically forwards to index.cfm (or whatever). If you can adjust the list of defaults, you can have CF do a 301 redirect. If not, you can do a meta-refresh, or JS redirect, or somesuch in an HTML file.
I think this is possible.
Using GetHttpRequestData you will have access to all the HTTP headers.
Then the GET header in that should tell you what file the browser is requesting.
Try
<cfdump var="#GetHttpRequestData()#">
to see exactly what you have available to use.
Note - I don't have Coldfusion to hand to verify this.
Edit: Having done some more research it appears that GetHttpRequestData doesn't include the GET header. So this method probably won't work.
I am sure there is a way however - try dumping the CGI scope and see what you have.
If you are able to install ISAPI_rewrite (Assuming you're on IIS) - http://www.helicontech.com/isapi_rewrite/
It will insert a variable x-rewrite-url into the GetHttpRequestData() result structure which will either have / or /index.cfm depending on which URL was visited.
Martin