I'm making a document in LaTeX. It includes a set of images in a row. A small percentage are quite wide and will stretch and push off the page. If I shrink all the image sequences then most of them will look too small. However it's not easy to figure out what sets are going to be too large. I'd like some automatic way to resize these sets.
Is there anyway to surround something with a command which will shrink it enough so that it fits within the width of the page? If it's already narrower than the page, then no shrinking is necessary?
you can do something like
\includegraphics[width=\textwidth]{figure}
or
\includegraphics[width=0.33\textwidth]{figure}
\includegraphics[width=0.33\textwidth]{figure}
\includegraphics[width=0.33\textwidth]{figure}
You may try the following macro:
\maxsizebox{〈width〉}{〈height〉}{〈content〉}
It only resizes the content if its natural size is larger than the given 〈width〉 or 〈height〉, but does not change the aspect ratio.
It is part of the adjustbox package. So you need to append to the preamble of your document:
\usepackage{adjustbox}
You can further read about it here.
The best way to scale down a big figure is this
\begin{figure}[!ht] \centering
\includegraphics[width=\textwidth,height=\textheight,keepaspectratio]{"path to your figure"}
\caption{"your caption"}
\label{"your label"}
\end{figure}
Related
I would like to use pst-optic to create some figures in a A4 landscape page and use the full size of the paper.
I have a two lenses system that I would like to draw.
The code I wrote is the following :
\documentclass[a4paper,12pt,landscape]{report}
\usepackage{auto-pst-pdf}
\usepackage{pst-optic}
\begin{document}
\begin{pspicture*}(-7.5,-5)(8,8)
\rput(0,0){\lens[lensScale=1.5,yBottom=-5,yTop=5,XO=-4,focus=1.5,OA=-2.5,AB=2,lensGlass=false, lensWidth=0.05]}
\Transform
\rput(0,0){\lens[lensScale=1.5,yBottom=-5,yTop=5,XO=3.5,focus=2,lensTwo=true,lensGlass=false,lensWidth=0.05]}
\end{pspicture*}
\end{document}
My problems are the following:
Whatever the size I enter in the pspicture command, I can't obtain the full drawing of the rays in the picture
I can't change the size of the pspicture environment to occupy the full size of the page
Can someone explain to me how to fix this ?
Best regards
I am trying to write a report and stuck with a wide figure. My document type is PRL using revtex4.1 with two columns. I have a wide figure which consists of 8 subfigures. I am trying to place it bottom of a page but it insists to go next page. Here is code for my wide figure:
\begin{figure*}
\centering
\subfloat[s1]{\label{fig:s1}\includegraphics[width=0.20\textwidth]{s1.png}}\qquad
\subfloat[s2]{\label{fig:s2}\includegraphics[width=0.20\textwidth]{s2.png}}\qquad
\subfloat[s3]{\label{fig:s3}\includegraphics[width=0.20\textwidth]{s3.png}}\qquad
\subfloat[s4]{\label{fig:s4}\includegraphics[width=0.20\textwidth]{s4.png}}\\
\subfloat[s5]{\label{fig:s5}\includegraphics[width=0.20\textwidth]{s5.png}}\qquad
\subfloat[s6]{\label{fig:s6}\includegraphics[width=0.20\textwidth]{s6.png}}\qquad
\subfloat[s7]{\label{fig:s7}\includegraphics[width=0.20\textwidth]{s7.png}}\qquad
\subfloat[s8]{\label{fig:s8}\includegraphics[width=0.20\textwidth]{s8.png}}
\caption{\label{fig:s}Caption}
\end{figure*}
Try also
\begin{figure*}[!hb]
If your figure is too wide, this might help: Centering wide tables or figures.
I don't know whether it will work, but have you tried using placements, ie:
\begin{figure*}[b]
where b stands for bottom?
You could also try using the float package (put this in the preamble, before \begin{document}:
\usepackage{float}
and then using
\begin{figure*}[H]
to specify exactly where you want your figure to be, i.e. put the figure exactly in the position in relation to your text where you want the figure to be placed.
It may be that your figure is just too big and it won't fit there, so you may have to reduce the size of the figures or fiddle with the margins (not recommended, but possible).
Lastly, in 6 days the LaTeX question and answer website will be open to everyone, and you might find it useful.
I have a large figure that appears at the end of my document rather than in the section that I want to be in. Even \begin{figure}[h] doesn't help. Without scaling it down, how can I put it at the end of the section I want it in?
Using the afterpage package can be a good solution. However, using the option here you are trying to tell LaTeX where you want to put the image. Instead, you need to tell LaTeX where the image is good to be put:
use \begin{figure}[tb] for figures that fit well in a page with text (say, half of the text height for the figure and the other half for the text)
use \begin{figure}[p] for floats large enough to require a dedicated page.
Setting a proper option increase your chances to have the image almost where you want, having at the same time a good page layout.
If the figure is still too far from the page where it should be placed, you can set some "barriers" for floats positioning with the packages placeins or afterpage (already mentioned).
Here is a small tutorial for float placement. The thing you want to do is put an \afterpage{\clearpage} command at the end of the section. This will create an additional page after the current one and place the floats that are left in the queque there. If the float still doesn't get placed, you have to resize it. If you really don't want to resize it and it should fit on the page, then you could try changing the margins and text area temporarily (i.e. just for that one page) and see if that lets the float get placed.
i forget if it's the float or array package that provides this, but,
\begin{figure}[H]
...
\end{figure}
The upper case H will put the figure exactly where it is in your code.
I've got a latex macro that draws a picture using PGF and Tikz according to given parameters. The width of picture drawn depends on these parameters.
PGF automatically calculates the resulting width of any picture drawn so the user does not have to set it explicitly(like for example when using latex build in picture environment).
However I need to know the width of picture that will be drawn. Of cause I could calculate it as the PGF does but this is going to be quite some work(a lot of if statements...). Is there a way to ask PGF what is the width of picture that is to be drawn (some command I expect)? Either inside tikzpicture environment or just after it?
Thanks for help.
What I would probably do is put the tikzpicture environment in a box, and then find the width of the box:
\setbox0=\vbox{\hbox{%
\begin{tikzpicture}
% ...
\end{tizpicture}%
}}
The width of the following picture is {\the\wd0}.
\box0
Note that after you run \box0, the box will be inserted into the document and its contents will be destroyed; you thus need to query the width of the box before you do that. If you want to save the width, you can store it in a dimension register with \dimen0=\wd0; alternatively, you can use \copybox0, which inserts the box but doesn't destroy it (although this might leak memory).
Also, having played with some of this before, I found that using just a \vbox caused the box to always be the full width of the page (which, if you think about it, makes sense); however, using just an \hbox caused the unboxing to fail for some reason (it seemed to be a known pug). Using both like this works, however—I'm using something very much like this to render TikZ pictures to PDF files of precisely the right size.
I have a question on inserting images into a LaTeX document. I try to insert images using the keyboard short cut: Ctrl-Alt-G and I'm able to insert images. But the compiled pdf document shows all the images at the end, whereas I want to interleave images with text. Something like the following:
Text1
Image1
Text2
Image2
Text3
Image3
I try to insert images at right positions i.e. in between text, but on compilation, they all appear at the end. I have tried different options provided on the image insertion UI but same result.
Any idea where I'm going wrong.
Related SO question.
You'll have to use graphicx package:
\usepackage{graphicx}
and then you just use \includegraphics
\includegraphics{myfig.pdf}
\includegraphics[width=60mm]{myfig.png}
\includegraphics[height=60mm]{myfig.jpg}
\includegraphics[scale=0.75]{myfig.pdf}
\includegraphics[angle=45,width=52mm]{myfig.jpg}
Try downsizing the images. Maybe they are too large and so they are moved to the end of the document..
Hope it helps.
What code did you use for the \figure environment? In most cases the "h" option should at least help a little bit there.
This is a FAQ: "Moving tables and figures in LaTeX". Note especially the third dot point, which relaxes some of the restrictions LaTeX uses to position floats.
That's the best answer I can give without seeing an example of how large your floats are and how you're inserting them into the document. Provided that they're reasonably-sized, you should have no problem with
\begin{figure}[htbp]
\includegraphics{myfig}
\caption{...}
\label{fig:myfig}
\end{figure}
And note that if the float is too large to fit then it will move to a subsequent page -- this is the whole idea behind getting LaTeX to help you with the formatting. You certainly don't want to end a page prematurely just because there's a figure coming up next that otherwise doesn't fit.
Maybe this can help you in general...I just hate the LaTeX way of making everything too advanced (flexible) at all times.
Beside, the source looks really awful.
It will not solve you initial problem, but since it will be easier to change size of each image you can at least try...
% Easy image insert
% use as \img{imagename}{caption}{label}
% will insert image with with 70% of textwidth
% change below for other width
\newcommand{\img}[3]{
\begin{figure}[!ht]
\centering
\includegraphics[width=0.7\textwidth]{#1}
\caption{#2}
\label{fig:#3}
\end{figure}
}
\img{myimage}{has this caption}{and_this_label}
the label is automatically prefixed with fig:.
Good luck!
/C
Using [!t] and [!h] in the figure environment, rather than [t], [h] etc seems to help, though I've yet to find a surefire way to get large images in sensible places. Sometimes it works half way through a document, othertimes it doesn't.
Sometimes just changing the width or height using an option to the includegraphics statement (square brackets before the filename a.k.a \includegraphics[width=foo]{}) will do the trick.
\begin{figure}[H!]
\includegraphics{myfig}
\caption{...}
\label{fig:myfig}
\end{figure}
Use H! to denote that you want your picture right there.
\documentclass{article}
\usepackage{graphicx}
\begin{document}
text
\begin{figure}[tbh]
\centering
\includegraphics[width=0.4 \textheight]{ & directory path of jpg. width defines the width of the page and one one can put in its place height which is text page height }
\caption{name of the jpg}
\end{figure}
% it worked for me.
\end{document}