Mapping Routes inside Controller - ruby-on-rails

Is it possible to map your routes inside of Controllers? I prefer having my routes defined near my controller actions.

If your motivation is to co-locate routing rules with associated controller actions then I don't believe that is possible in Rails. The controller actions are executed post-routing so the ability to direct any routing behavior (such as it is) in the controller layer is limited to redirect_to which is just syntactic sugar for HTTP's "302 moved". Hardly a satisfactory routing strategy.
Rack middleware (within Rails) or the Sinatra framework more tightly couples routing and actions in code. Perhaps this is what you're looking for?

Please hve a look my code .
First dont define anything about your controller in rount.rb .
Then if your enter in browser "http://localhost:3000/users/my_action" .
Then write a following code in your controller .
Class UsersController < ....
def my_action
if request.get?
somrthing your code ......
end
if request.post?
something your code ......
end
end
end

Related

Dynamic Routes Rails 4, taken from db

Frustrating, I can't find an eligible solution for my problem.
In my Rails 4 app, I want to give my users the possibility to add their own custom post types to their sites. Like:
www.example.com/houses/address-1
www.example2.com/sports/baseball
Both would work, but only for the linked sites. Sports and houses would be the (RESTful) post types, taken from the db, added by users.
I have been struggling to find a elegant solution to accomplish this. I found http://codeconnoisseur.org/ramblings/creating-dynamic-routes-at-runtime-in-rails-4 but that feels kinda hacky and I'm not sure if reloading the routes works in production, I'm getting signals that it won't.
I'd say I have to use routes constraints http://guides.rubyonrails.org/routing.html#advanced-constraints but I don't have a clue how to approach this.
To be clear, I have no problem with the site setting stuff, the multi tenancy part of my app is fully functional (set in Middleware, so the current site is callable in the routes.rb file). My issue is with the (relative) routes, and how they could be dynamically set with db records.
Any pointers much appreciated.
I think route constraints don't work for you because your domain is a variable here. Instead, you should be examining the request object.
In your ApplicationController, you could define a method that would be called before any action, like so:
class ApplicationController < ActionController::Base
before_action :identify_site
def identify_site
#site = Site.where(:domain => request.host).first
end
end
As you scale, you could use Redis for your domains so you're not making an expensive SQL call on each request.
Then you can just add the #site as a parameter to whatever call you're making. I'm assuming you're doing some sort of "Post" thing, so I'll write some boilerplate code:
class PostController < ApplicationController
def show
#post = Post.where(:site => #site, :type => params[:type], :id => params[:id])
end
end
Just write your routes like any other regular resource.

How to run class method via URL in Rails 4

I'm real beginner in Rails.
I created app/services/xclass.rb class with some_method inside.
I need to execute some_method using url.
For example, I want run this method when I execute in my browser url - http://application.com/notifications/send
I think it could be done through controller (notifications_controller) but how to do it?
I created only controller, with no model, just for launching some_method.
first, create a route:
get "notifications/send" => "notifications#some_action", :as => "send_notification"
Then create a controller action in your controller (ie. NotificationsController):
def some_action
Xclass.some_method # run the method you want
redirect_to root_path # redirect or whatever you want here
end
Now you can either visit the path http://your_app.com/notifications/send, or link to is using 'send_notifications_path' url helper in rails.
That should do it
Since you're a beginner, let me give you some ideas
MVC
Firstly, you need to appreciate that Rails is an MVC (model view controller) framework:
In short, this means that every time you send a "request" to Rails, it will be "routed" to the specific controller action which corresponds with that route.
This means that when you ask about how to fire a "class method", you're going to have to work within the confines of the MVC programming pattern. Here's how:
#config/routes.rb
resources :notifications do
get :send, on: :collection #=> domain.com/notifications/send
end
#app/controllers/notifications_controller.rb
class NotificationsController < ApplicationController
def send
#call your class method here
YourModel.class_method
end
end
#app/lib/your_model.rb
class YourModel
def self.class_method
#do something here
end
end
--
Rails
This is further supported by the fact that Rails is just a framework - in fact it's a gem (a great one) which runs on top of Ruby.
This means that even though some of the ways in which Rails works might seem somewhat alien to begin with, you have to remember that it basically just captures "requests" fed to it by a web sever, processing them with connectivity to the database etc.
The issue here is that as you're sending the request over HTTP, you have to work within the constraints of this protocol (specifically that it's stateless), and with Rails. As mentioned, Rails is MVC-based, which means that every request will be routed to your controller, which is why you have to create the corresponding route & controller action to handle it
If you use the code above (tweaked to your app), it should work for you

Cancan authorization in Non RESTful controller

I have a controller like this, but no model class backing it.
class UserInviteController < ApplicationController
def process_email
authorize! :process_email, :abc
...
method body
...
end
end
In my ability class, I have
can :process_email, :abc if user.role == 1
I am following the wiki Non RESTful Controllers authorization by Cancan and it says that you can pass a symbol as the second argument to both authorize! and can.
It doesn't have to be a model class or instance.
Generally the first argument is the "action" one is trying to perform
and
the second argument is the "subject" the action is being performed on. It can be anything.
I have done the same, but still It doesn't work.
NOTE: I also tried doing it the other way round by
authorize_resource :class => false
as said in the wiki, but that also doesn't work.
If its of any help, my controller doesn't have any actions like show, new, create or any other basic CRUD actions.
Cancan: 1.4.1
I tried to debug following the link Debugging Abilities and figured out what was wrong.
The abilities were correct, I was doing a small mistake by specifying them in the wrong order.
For others coming on to this page, if you face any problems with Cancan abilities not working, try to debug using the above link. You will eventually figure out whats not working and why.

about rails3 routes match

i have a usercenter/users_controller,in this controller have code like belows
def login
end
def forgot
end
def reset_password
end
each method mapping a view login.html.erb, forgot.html.erb,reset_password.html.erb
now i want make a route for them at /usercenter/login
/usercenter/forgot
/usercenter/reset_password
how could i write route file ?
also i have a relevent question is is there some easy way for reduce write route mapping code because i have many controller method follow this rule
I think what you are looking for is named routes. Check this http://guides.rubyonrails.org/routing.html#controller-namespaces-and-routing

What's the correct way to run one controller action from another controller action without an HTTP redirect?

I'd like to be able to dispatch from one controller action to another conditionally, based on a combination of query parameters and data in the database.
What I have right now is something like:
class OldController < ApplicationController
def old_controller_action
if should_use_new_controller
new_params = params.dup
new_params[:controller] = "new_controller_action"
redirect_to new_params
return
end
# rest of old and busted
end
end
class NewController < ApplicationController
def new_controller_action
# new hotness
end
end
This works just fine, but it issues an HTTP redirect, which is slow. I'd like to be able to do this same thing, but within the same HTTP request.
Is there a clean way to do this?
Edit: The bounty will go to someone who can show me a clean way to do this that leaves the controllers and their actions relatively untouched (other than the redirect code itself).
Instead of calling code across actions, extract the code to lib/ or something, and call that code from both controllers.
# lib/foo.rb
module Foo
def self.bar
# ...
end
end
# posts_controller
def index
Foo.bar
end
# things_controller
def index
Foo.bar
end
Create an instance of the controller class:
#my_other_controller = MyOtherController.new
Then call methods on it:
#my_other_controller.some_method(params[:id])
I prefer the module idea, but this should do the trick.
You can also pass parameters as a whole from another controller:
#my_other_controller.params = params
I suspect you want option 3, but lets go through the some alternatives first
Option 1 - Push the controller selection logic into a helper that inserts the right link into your view. Benifits - controllers remain clean, Cons - if decision logic depending on submitted values this approach won't work. If URL is being called by external websites then this won't work.
Option 2 - Push the logic back into your model. Pro's - keeps controller clean. Cons - doesn't work well if you've got lots of sesson, params or render / redirect_to interaction.
Option 3 - Stay within the same controller. I suspect you are trying to replace some existing functionality with some new functionality, but only in some cases. Pro's - Simple and have access to everything you need. Cons - only works if it makes sense to use the same controller i.e. you're working with the same entity such as user, place or company.
Lets look an an example for option 3. My links controller has totally diferent behavour for admins than other users ...
class LinksController < ApplicationController
#...
def new
#Check params and db values to make a choice here
admin? ? new_admin : new_user
end
#...
private
def new_admin
#All of the good stuff - can use params, flash, etc
render :action => 'new_admin'
end
def new_user
#All of the good stuff - can use params, flash, etc
render :action => 'new_user'
end
end
If two controllers are trying to do the same thing, there's a very good chance this should be in a model. Take a good look at your design and -- I'm sorry I don't know your experience level with MVC -- read up on thin controller techniques:
http://weblog.jamisbuck.org/2006/10/18/skinny-controller-fat-model
http://www.robbyonrails.com/articles/2007/06/19/put-your-controllers-on-a-diet-already
http://andrzejonsoftware.blogspot.com/2008/07/mvc-how-to-write-controllers.html
If the problem is that you need the other controller to do the render, then maybe the route should have pointed there to begin with, and still the skinny controller technique should save the day.
If extracting the common code between controllers into a module doesn't work for you, I would use Rack middleware. I haven't seen code that uses ActiveRecord within middleware but I don't know of any reason why it shouldn't be possible since people have used Redis and the like.
Otherwise I think your only option would be to restart processing of the request with something like (untested, pseudo example):
env['REQUEST_URI'] = new_controller_uri_with_your_params
call(env)
This is similar to how integration tests are implemented. But I don't know if everything from call until you hit a controller is idempotent and safe to rerun like this. You could trace through the source and see. But even if it's ok now, it might break in any future version of rails or rack.
Using middleware would avoid this by letting you intercept the request before it's been run. You should still be able to share code with your rails application by extracting it out into common modules included in both places.
Honestly I think just doing the simple thing of factoring the common controller code is likely cleaner, but it's hard to know without the details of your situation so I thought I'd go ahead and suggest this.
Do this:
class OldController < ApplicationController
def old_controller_action
if should_use_new_controller
new_controller_action
end
# rest of old and busted
end
end
and the new controller
class NewController < OldController
def new_controller_action
# new hotness
end
end

Resources