Target failed to run: Remote exception encountered: Faild to get task for pid 3103
I'm running iPhone OS 3.1.3 on the device and I can run my App in debug mode on the device.
I downloaded and installed the xcode_3.2.2_and_iphone_sdk_3.2_final.dmg twice, without any luck.
I got the same issue when I switched to XCode 4 and I solved it by setting my release code-signing profile to my development profile instead of the app store profile that was previously set. Indeed, Xcode 4 profiles your app using the release build by default.
To answer my own question:
I have two applications installed on my device with the same name resp. the same Bundle display name: Doublemill. Since they have different bundle identifiers, the debugger can deal with that, however Instruments seems to be confused.
Hey.
There can also be some other issues.
Provisioning Profile.
From Apple documentation:
For your protection, the instrument does not allow you to process any application that is not
code-signed with your provisioning profile. This includes any copy that has been downloaded from the iTunes App Store.
Device.
Instrumetns UIAutomation doesn't work on iPhone 3G, only 3Gs, 4.
Sadly support for instruments is bad. Apple doesn't seem to put much attention to it.
FYI for those running from the command line and getting the same issue, you have to use the fully qualified path to the application or instruments will blow up (with a relative path). That was a good waste of a couple hours tracking that down.
For those of you having this issues set your "Code Signing Identity" to IOS Developer, see below.
In my case, I using distribute provisioning profile in Release, change to development provisioning profile will fix that.
Related
I'm sending my app to testers with Beta from Crashlytics which is an amazing tool to do app testing.
I had every new tester's device UDID registered in my developer account and then distribute a new build.
My testers got email invitation and accessed app's installation which could not be completed on their device.
They kept seeing an alert showing up with message:
Unable to download app - MyApp could not be installed at this time -
Done / Retry
Testers' testing status are "installed" in my Crashlytics dashboard but they're actually not able to finish installation.
Please help me find any possible factor causing this problem.
Perhaps the provisioning profile embedded in the build has been invalidated. Use Xcode to create a new archive, then use Fabric to upload a new build with that archive.
Discussion:
In my case, I had deleted the provisioning profile in the Apple Developer Member Center that had been embedded in each of my Fabric Beta builds. This caused the app testers had previously installed to immediately crash when they tried to launch it (embarrassing). It also caused the "Unable to download app - MyApp could not be installed at this time - Done / Retry" issue when testers tried to (re)install the app via Fabric Beta. Uploading a new build with my new provisioning profile embedded fixed the issue (each tester had to install the new build).
I've run into this problem back on iOS8 and just recently saw it again for iOS9, the only thing that solved the install issue was for my users to delete any previous version that they had downloaded, restart their phone, and try again.
You can also verify with them if Crashlytics properly installed on their iDevice, I've seen more than once where the configuration profile caused the issue, it's worth removing that (Settings -> General -> Configuration Profile (towards the bottom)) and retrying the install.
This is usually caused by one of two problems:
Incorrect provisioning profile/code signing settings. Double- and triple-check that the following settings are the same for the project and the provisioning profile: bundle identifier, development vs. distribution, adhoc.
Caching - sometimes, even when you've done everything correctly, things still just go awry. In such cases, you can try: deleting the previous version of the app from your phone, cleaning your project, deleting and re-downloading provisioning profiles, and building the app again.
RubyMotion Solution
For me, it was because I was using a development distribution profile, but with the wrong entitlements. Well, entitlement, singular.
I still had the 'beta-report-active' entitlement enabled, which was not included with the development distribution profile I am using. It is instead included with the production distribution profile (which is needed to distribute to TestFlight). However, I just wanted to deploy to my local phone, and not air my dirty app laundry to my entire internal test group, so this is where I found myself.
In any case, removing the 'beta-report-active' entitlement fixed my issue.
I tried the normal route of checking for proper certs and also deleting the app and provisioning profile along with rebooting device. In my case it was installing on device A and not device B. Device A was older iPhone 5c running iOS 9 and device B was newer iPhone 8 running iOS 11.x. When I archived the app for distribution I was selecting device A during the archive. Once I selected "Generic Device" it worked. But I'm sure I've built in the past selecting a specific device instead of generic and it worked. I was using Xcode 8.2, but I don't believe the Xcode version matters.
I have two iphone devices( 4s and 5 ) connected to my computer and i am trying to install an application in both the devices. It installs pretty well in iphone 5 but it gives an error 'The application could not be verified.' when attempted to install in the iphone 4s device.
The UDIDs of both the devices have been added in the provisioning profile generated for the application.
Also, to add a note, I have just updated my iphone version to 8.1.3 in my 4s device. I am not sure though if the error has anything to do with it.
Any help on this would be much appreciated. I have been stuck on this for some time now.
EDIT:
I just connected this to another iPhone device and the issue seems to be there again. Basically this means that the app, for some reason, installs only in the phone which I have been using for some time now and not in any other phone. Once again, I am pretty sure that the provisioning profile contains the UDIDs of all these 3 devices.
I had something similar happen to me just recently. I updated my iPhone to 8.1.3, and started getting the 'application could not be verified' error message from Xcode on an app that installed just fine on the same iOS device from the same Mac just a few days ago.
I deleted the app from the device, restarted Xcode, and the app subsequently installed on the device just fine without any error message. Not sure if deleting the app was the fix, or the problem was due to "the phase of the moon".
As I notice The application could not be verified. raise up because in your device there is already an app installed with the same bundle identifier.
I got this issue because in my device there is my app that download from App store. and i test its update Version from Xcode. And i used same identifier that is live app and my development testing app. So i just remove app-store Live app from my device and this error going to be fix.
just delete the app and try again, it happens to me when i try to launch over a device that has the same app but generated by an ipa file.
You probably used the "Fix Issue" option in Xcode when plugging in a new device. Old question but I believe this is the actual answer to WHY this is happening. When you install an app on a device it is signed with a specific development provisioning profile. If, for instance, you plug in another device that is not registered on your developer account Xcode will ask you to "fix the issue". When you press that the device is added and another provisioning profile is created/modified. If you try to overwrite an existing app you'll receive that error. Deleting the app and reinstalling it works since the profile has been altered. I find this often happens when a Team is set and a member plugs in a new device then Xcode "Fixes" the problem.
Might have figured it out... Deleting the app from the device worked for me, as others mentioned before (thanks!).
I think the reason is that the app on the device was actually signed with a separate provisioning profile, specifically a distribution profile in my case.
I faced this issue a lot. I am not sure if this is the issue, but I think, when xCode saw that there is an app with the same bundle identifier as of the app, I am trying to install, it didn't allow me. So, I had to delete the older one and attempted to install and it worked. However sometimes for testing purpose, I needed multiple version of the same app and in that case, I would change the bundle identifier and try to install. It only works if, I am using an wildcard provisioning profile.
To others not using RubyMotion and don't think that deleting the app is acceptable (as in, you want to do upgrade testing). Check out the bottom of these docs from Apple:
https://developer.apple.com/library/ios/technotes/tn2319/_index.html
It looks like they changed something in 8.1.3 to check for this new rule.
The Fix
"[Add] the installed application’s application-identifier value, as logged in the second parentheses, to the previous-application-identifiers entitlement’s array value for the app being installed (by resigning it or re-building it) and requesting new special provisioning profiles as shown below."
<key>previous-application-identifiers</key>
<array>
<string>{Your Old App ID Prefix}.YourApp.Bundle.ID</string>
</array>
EDIT:
In order to do this, you need special provisioning profiles. You can request these from Apple:
"To enable signing with the previous-application-identifiers entitlement new special provisioning profiles are required that can be obtained by going to the Contact US page and requesting them." (from the docs linked above).
Had the same issue on my iPad running 8.1.3 Deleting the app and installing again fixed the issue. I use two different provisioning profiles on two different machines and that could have caused this issue.
Working & tested solution, which does not require to delete application:
It looks like AppStore Distribution Provisioning Profile or just iOS Distribution certificate have special permissions and "Could not be verified..." problem does not apply to them. They will always override previous certificate.
In other words: AppStore release will install successfully, even if already installed (testing, adhoc or enterprise) app has been signed by the certificate from different team.
If you are lucky and have previously uploaded app to the AppStore account owned by the same team as in certificate you have a problem with - then things are very simple: just download & install app from AppStore.
When it installs - app certificate will be the same as the one you want to test with and problem goes away.
If your app is not on the AppStore yet - iTunesConnect beta comes to the rescue:
Disclaimer: I did not tested this but since cert an prev are the same as AppStore release, I bet it works:
Archive your app with AppStore provisioning profile (iOS Distribution cert) and upload to iTunesConnect (to the account owned by the same developer team as included in the provisioning profile not you want to run).
Invite person with the device you want to run on (yourself?) to beta test.
Download & install the app from iTunes connect beta.
Now you are able to install your testing version.
The application could not be verified" , in your device there could be already an app installed with the same bundle identifier.
So Simple solution Just delete the App & try again..
....
TL;DR answer - There is no real solution besides "delete app and reinstall".
This answer is not satisfactory for many situations, when you have an existing database that needs to not get deleted within the app.
Lukasz and plivesey are the only ones with solutions that don't require delete, but neither worked for me.
I resolved this issue by changing the Build System to legacy in xcode.
I had the same problem but the mentioned solutions above didn't work for me. Even I had no previous app on device, I got this error when deploying on my device.
How to do:
Simply, go to menu File > Project Setting, inside Share Project Settings, change Build System from "New Build System (default)" to "Lagacy Build System".
I also encountered the same issue. Deleting the app didn't work, but when I tried deleting another app which was the current one's 'parent'(I copied the whole project from the previous app, modified some urls and images, then I clicked 'Run' and saw the unhappy 'could not be verified' dialog). Seems the issue is related to provisioning and code signing and/or some configurations of the project. Very tricky.
I had changed the team but I forgot to change it in my Tests target it so it caused that. Maybe this helps someone.
Just had the same problem and I found out that the issue is with expired certificate.
My app was distributed (AdHoc) through firebase and few days ago app was working just fine.
Today I've realized that I can't install it because 'The application could not be verified'.
Finally I realized that certificate that I was using for app signing has expired 2 days ago.
You need to upload it again and you'll be able to install it.
I had the same problem. But, I realised I was using a single plist with (debug) and (release) configuration, like this.
So, I changed few things..
Keeping a separate scheme for (release).
I added a new scheme for development purposes.
Edited the new scheme > run > Build Configuration > and set it to (release)
Generated a new archive using the new scheme and voila!!..
I'm able to install on all my devices.
My case:
jailbreak'ed iPhone
Final solution:
Install tweak AppSync Unified via Cydia
to bypass signing/certificate verification
Same issue occurred for me when I was installing through link. I tried to install using different link. Then I could install the app.
I'm trying to send an app to my client so he can install it on his iPhone. For some reason, when he syncs it, it just says "Installing..." and gets stuck there. Does anyone know what's going on?
Are you mailing the IPA file directly or distributing Over-The-Air?
Some troubleshooting steps:
unzip the IPA and check that the UDID is in the app's embedded.mobileprovision file (use a text editor)
check that release configuration used in the Archive step specifies a distribution profile
check that this profile is not a wildcard
Step 1 tells you if Xcode picked up the right Ad Hoc profile, and steps 2 & 3 make sure that bad entitlements haven't snuck into your IPA.
This might sound a bit obvious, but have you set the bundle identifier in the info.plist?
I had this problem with the app getting stuck on 'installing' in iOS 7, then I noticed I'd simply forgotten to set the bundle identifier in the project info.
The best way that i know to show beta of your app to client is using TestFlight. But remember that you need to add your client device device UDID to your testing device, and then add them to Provision profile / distribution. And don't forget to update your Xcode profiles afterwards.
It's hard to believe, but building the project on another machine did the trick. :/
I have the following error when I try to run a new project on my ipod:
Error launching remote program: failed to get the task for process 312.
The program being debugged is not being run.
I've read about Entitlements.plist, and I've tried to add the get-task-allow, but then it doesn't let me compile because of a code signing error. I only have a development provisioning profile, so it's not the same as the people who were trying to debug the distribution build (I'm also in the debug build, so that isn't a problem).
Old projects build and run fine on the ipod, just new projects.
I've tried restarting both xcode and my ipod, but it doesn't help.
I have no more ideas on how to build/run new projects on xcode, so any help is much appreciated!
Oh, and I'm using an iPod 3G with iOS 4.0.1. Xcode is 3.2.3 (64-bit).
It turns out that using a different provisioning profile (one with a wildcard rather than one without) solved this issue.
The key point is to use a Developer profile rather than a Distribution profile.
Check that you're doing signing using a development provisioning profile, not a distribution one.
This error happens when you have set Distribution Provisioning profile in code signing. Change it to Developer Provisioning Profile, then it will work. Worked for me for Xcode SDK 4.5.
There is also a case that your error would happen.
If an app with same Bundle Identifier is launched at background ( probably an App Store version ), Xcode debugger will not know which App it should attach to. To solve it, remove/uninstall the App Store version, and click Run in Xcode again.
The same story can apply if you once build the app with a bundle id then you changed the project bundle id and still kept both app versions. make sure you remove the old one.
If your certificates are not quite right or have become not quite right, this problem can start to happen and you can go round and round playing with provision and entitlement files to no effect. (In nearly all cases, you don't need an entitlement file.)
I'm talking here about debugging on a tethered device in "debug" mode, not any sort of "release" mode.
Here's how I finally determined this was the problem and fixed it:
1) Try to create the simplest Xcode project possible and in Target...General set it up for your "Team". (If you find this impossible to do, that already is a sign of this sort of problem.)
2) Tether your device and try to run on it. Normally, this would go smoothly, but if the opening screen appears on your device for a second or two and then the app crashes and Xcode says it can not attach to some positive task id, then you may have the sort of problem I had.
3) So I then went to another Mac with Xcode and did the same thing, letting Xcode 5 automatically get the needed credentials. (I'm using a "wild card" * app id for all of this.) In my case, much to my surprise the simple app I created on the new Mac ran on the tethered device just fine keeping up its opening screen indefinitely. What a relief. So I then went to keychain access on the new machine, exported all of the relevant keys into one file and then exported the relevant certificated to a .p12 file. I also made a copy of the new working project to take back to the first Mac.
4) Back at the first Mac using the app for the second Mac, it had trouble with the Team ID when I looked at the Target...General screen. Your symptoms might be different, but the point is I couldn't rebuild the app from the second Mac on the first Mac.
5) So I then opened up Keychain Access (possibly not necessary) and double-clicked on the files I brought over, first the one with the keys and then the one with the certificate, providing the p12 password when requested. (Some of this may not actually be necessary, but I'm not sure which and I am describing what worked for me.)
6) I did step 4 again and this time it worked fine! I then found that the other programs that were giving me the "failed to get task" problem now worked fine, too. I just wish I could get back all the time I lost before I tried the process described here.
Conclusion, something was wrong or had become wrong with the certificates or the keys on the first Mac. It was subtle enough that I could still do builds, make ad hoc releases, etc. but I could not run on a tethered device. Though I don't think it is a factor, I was using a corporate developer account and this Mac was set up to do development for several other developer accounts (and these did not display the problem).
After Xcode 5.0 tried and failed (it hung) to update certificates, ... which it suggested me to do. All I did then:
Restart Xcode 5.0
Open Window > Organizer
Select Devices at the top
Select my device (which had a green bullet)
Click the (+) Add to Member Center at the bottom and follow the few simple steps
Go to the Apple Developer Center and make sure that your developer certificate has not expired. Mine had expired so I renewed it and then went back into Xcode (5.1.1) and under accounts preferences I viewed the details of my apple account and hit the little refresh button at the bottom. My iOS development signing identity showed up and I was back in business.
Removing distribution profiles from device in Organizer solved this issue for me
1.Run the Application using development certificates in both debug and release area in code signing identity.
or
2.Use the development certificate in debug area and distribution certificate in release area.
I've been trying for a weekend now to install my application via ad-hoc means for beta testing and demo purposes. I can install from Xcode just fine, but when I try and take the app file and place it into iTunes, then try and synch, I keep getting the error "The application was not installed on the iPad because it is not signed".
I have gone through all the steps. We went to the provisioning portal and added all the devices. We then downloaded a distribution provisioning profile and installed that onto the development computer. We created an Entitlements.plist file, though there was no get-task-allow attribute, so I had to add in my own. I cleaned the targets, restarted Xcode, built the application under the ad-hoc profile with the Entitlements.plist set for the Code Signing Entitlements.
I take the app file that's generated and drag it into the Applications area of iTunes, hit synch, and I get the error.
I know I am doing something wrong, missing a step, but it must be a convoluted, obscure step that Apple doesn't have in their documentation. So can anyone see the problem in what I'm doing? If you could, let me know. Thanks.
Ok. Yay. Figured this out after some more hair-pulling.
Apparently, the build you follow is important. I kept testing and building to the Simulator folder, and this is wrong.
To deploy to a device, you should clean all targets and then build specifically to the device. You don't have to run it or have something plugged in, but you must build to device. The APP that is produced is different for simulator as it is for device.
Did you set the "Code Signing Entitlements" build setting in your target to "Entitlements.plist"?