In my presentation, I use \usetheme{Warsaw} and in order to increase the usable space in each frame, I use \useoutertheme{infolines}. In this way, the bar at the bottom of each page is equally divided between author's name, title, and date and slide number. Is there anyway to change the width of each section? For example, I need more space for the title compared to author's name or date. Any comment is highly appreciated. Also, the code I am using is the following:
\usepackage{beamerthemesplit}
\usetheme{Warsaw}
\useoutertheme{infolines}
\title[...]{...}
\author[...]{...}
\institute{...}
\date{...}
\begin{document}
\begin{frame}
\titlepage
\end{frame}
Thank you.
Find the beamerouterthemeinfolines.sty file (in the ...\latex\beamer\themes\outer folder). You will see that the 1:1:1 width is hard-coded using wd=.333333\paperwidth for each box, so you will have to edit the style file.
The following is not tested, but should set you on the right path.
Change those values as you want, then save the file under a different name, say beamerouterthemeunevenlines.sty. Now use unevenlines as your outer theme.
Related
I want to change the font size to small for the entire document. I have searched online. But I am not able to find a reasonable (one line) answer. Is this possible to change the font size of latex document by only one command.? Thanks.
I think either
\documentclass[10pt]{article}
where you replace 10 with whatever font point-size you want, or, perhaps less likely,
\begin{document}
\small
where you replace \small with whatever size-command you want, might be what you are looking for.
I have a LaTeX document that contains a paragraph followed by 4 tables followed by a second paragraph. I want the 4 tables to appear between the two paragraphs which from what I've read means I should use the [h] option after beginning the table environment (e.g. \begin{table}[h]).
Using this the first two tables appear after paragraph 1 as expected, however paragraph 2 is then displayed with the last two tables appearing on the following page. How can I get the tables to appear in the correct location?
I've tried various things to correct the positioning such as using [h!] however this doesn't seem to have any effect. Using \clearpage after the tables does have the desired effect of making the tables appear before the second paragraph but it then leaves the last two tables on their own page with loads of white-space, when I would prefer to have the second paragraph begin immediately after the tables.
Paragraph 1...
\begin{table}[h]
table1...
\end{table}
\begin{table}[h]
table2...
\end{table}[h]
...
Paragraph 2...
After doing some more googling I came across the float package which lets you prevent LaTeX from repositioning the tables.
In the preamble:
\usepackage{float}
Then for each table you can use the H placement option (e.g. \begin{table}[H]) to make sure it doesn't get repositioned.
Table Positioning
Available Parameters
A table can easily be placed with the following parameters:
h Place the float here, i.e., approximately at the same point it occurs in the source text (however, not exactly at the spot)
t Position at the top of the page.
b Position at the bottom of the page.
p Put on a special page for floats only.
! Override internal parameters LaTeX uses for determining "good" float positions.
H Places the float at precisely the location in the LATEX code. Requires the float package. This is somewhat equivalent to h!.
If you want to make use of H (or h!) for an exact positioning, make sure you got the float package correctly set up in the preamble:
\usepackage{float}
\restylefloat{table}
Example
If you want to place the table at the same page, either at the exact place or at least at the top of the page (what fits best for the latex engine), use the parameters h and t like this:
\begin{table}[ht]
table content ...
\end{table}
Sources: Overleaf.com
At the beginning with the usepackage definitions include:
\usepackage{placeins}
And before and after add:
\FloatBarrier
\begin{table}[h]
\begin{tabular}{llll}
....
\end{tabular}
\end{table}
\FloatBarrier
This places the table exactly where you want in the text.
Here's an easy solution, from Wikibooks:
The placeins package provides the command \FloatBarrier, which can be used to prevent floats from being moved over it.
I just put \FloatBarrier before and after every table.
What happens if the text plus tables plus text doesn't fit onto a single page? By trying to force the typesetting in this way, you are very likely to end up with pages that run too short; i.e., because a table cannot by default break over a page it will be pushed to the next, and leave a gap on the page before. You'll notice that you never see this in a published book.
The floating behaviour is a Good Thing! I recommend using [htbp] as the default setting for all tables and figures until your document is complete; only then should think about fine-tuning their precise placement.
P.S. Read the FAQ; most other answers here are partial combinations of advice given there.
If you want to have two tables next to each other you can use: (with float package loaded)
\begin{table}[H]
\begin{minipage}{.5\textwidth}
%first table
\end{minipage}
\begin{minipage}{.5\textwidth}
%second table
\end{minipage}
\end{table}
Each one will have own caption and number.
Another option is subfigure package.
In my case I was having an issue where the table was not being displayed right after the paragraph I inserted it, so I simply changed
\begin{table}[]
to
\begin{table}[ht]
You may want to add this to your preamble, and adjust the values as necessary:
%------------begin Float Adjustment
%two column float page must be 90% full
\renewcommand\dblfloatpagefraction{.90}
%two column top float can cover up to 80% of page
\renewcommand\dbltopfraction{.80}
%float page must be 90% full
\renewcommand\floatpagefraction{.90}
%top float can cover up to 80% of page
\renewcommand\topfraction{.80}
%bottom float can cover up to 80% of page
\renewcommand\bottomfraction{.80}
%at least 10% of a normal page must contain text
\renewcommand\textfraction{.1}
%separation between floats and text
\setlength\dbltextfloatsep{9pt plus 5pt minus 3pt }
%separation between two column floats and text
\setlength\textfloatsep{4pt plus 2pt minus 1.5pt}
Particularly, the \floatpagefraction may be of interest.
Not necessary to use \restylefloat and destroys other options, like caption placement. just use [H] or [!h] after \begin{table}.
I have a Latex document where I need to change the margins of only a few pages (the pages where I'm adding a lot of graphics).
In particular, I'd like to change the top margins (\voffset). I've tried doing:
\addtolength{\voffset}{-4cm}
% Insert images here
\addtolength{\voffset}{4cm}
but it didn't work. I've seen references to the geometry package, but I haven't found how to use it for a bunch of pages, and not for the whole document.
Any hints?
Use the "geometry" package and write \newgeometry{left=3cm,bottom=0.1cm} where you want to change your margins. When you want to reset your margins, you write \restoregeometry.
I've used this in beamer, but not for general documents, but it looks like that's what the original hint suggests
\newenvironment{changemargin}[2]{%
\begin{list}{}{%
\setlength{\topsep}{0pt}%
\setlength{\leftmargin}{#1}%
\setlength{\rightmargin}{#2}%
\setlength{\listparindent}{\parindent}%
\setlength{\itemindent}{\parindent}%
\setlength{\parsep}{\parskip}%
}%
\item[]}{\end{list}}
Then to use it
\begin{changemargin}{-1cm}{-1cm}
don't forget to
\end{changemargin}
at the end of the page
I got this from Changing margins “on the fly” in the TeX FAQ.
I was struggling a lot with different solutions including \vspace{-Xmm} on the top and bottom of the page and dealing with warnings and errors. Finally I found this answer:
You can change the margins of just one or more pages and then restore it to its default:
\usepackage{geometry}
...
...
...
\newgeometry{top=5mm, bottom=10mm} % use whatever margins you want for left, right, top and bottom.
...
... %<The contents of enlarged page(s)>
...
\restoregeometry %so it does not affect the rest of the pages.
...
...
...
PS:
1- This can also fix the following warning:
LaTeX Warning: Float too large for page by ...pt on input line ...
2- For more detailed answer look at this.
3- I just found that this is more elaboration on Kevin Chen's answer.
\par\vfill\break % Break Last Page
\advance\vsize by 8cm % Advance page height
\advance\voffset by -4cm % Shift top margin
% Start big page
Some pictures
% End big page
\par\vfill\break % Break the page with different margins
\advance\vsize by -8cm % Return old margings and page height
\advance\voffset by 4cm % Return old margings and page height
For figures you can use the method described here :
http://texblog.net/latex-archive/layout/centering-figure-table/
namely, do something like this:
\begin{figure}[h]
\makebox[\textwidth]{%
\includegraphics[width=1.5\linewidth]{bla.png}
}
\end{figure}
Notice that if you have subfigures in the figure, you'll probably want to enter into paragraph mode inside the box, like so:
\begin{figure}[h]
\makebox[\textwidth]{\parbox{1.5\textwidth}{ %
\centering
\subfigure[]{\includegraphics[width=0.7\textwidth]{a.png}}
\subfigure[]{\includegraphics[width=0.7\textwidth]{b.png}}
\end{figure}
For allowing the figure to be centered in the page, protruding into both margins rather than only the right margin.
This usually does the trick for images. Notice that with this method, the caption of the image will still be in the delimited by the normal margins of the page (which is a good thing).
A slight modification of this to change the \voffset works for me:
\newenvironment{changemargin}[1]{
\begin{list}{}{
\setlength{\voffset}{#1}
}
\item[]}{\end{list}}
And then put your figures in a \begin{changemargin}{-1cm}...\end{changemargin} environment.
Look up \enlargethispage in some LaTeX reference.
I could not find a easy way to set the margin for a single page.
My solution was to use vspace with the number of centimeters of empty space I wanted:
\vspace*{5cm}
I put this command at the beginning of the pages that I wanted to have +5cm of margin.
This worked for me:
\newpage % larger page1
\enlargethispage{1.5cm} % more room for text or floats
\advance\voffset by -0.5cm % reduce top margin
\advance\footskip by 1cm % lower page number
Some content
\newpage % larger page2
\enlargethispage{1.5cm}
Some content
...
\newpage % return to normal page
\advance\voffset by 0.5cm
\advance\footskip by -1cm
I had the same problem in a beamer presentation. For me worked using the columns environment:
\begin{frame}
\begin{columns}
\column{1.2\textwidth}
\begin{figure}
\subfigure{\includegraphics[width=.49\textwidth]{1.png}}
\subfigure{\includegraphics[width=.49\textwidth]{2.png}}
\end{figure}
\end{columns}
\end{frame}
If I include [p] in the placement specifier of a \begin{figure} environment, figure floats may be placed on a dedicated page. However, at least in the "book" document class, floats are centered vertically on those pages.
How do I force all "pages-o-floats" to be aligned to the top margin (just like normal text pages)?
I believe your answer is in the UK TeX FAQ:
\#fptop defines the distance from the top of the page to the top of the first float
The simple fix is to reset \#fptop in your preamble:
\makeatletter
\setlength{\#fptop}{0pt}
\makeatother
However, you might find that this is a bit too high, so you might want something like 5pt instead. (Anyway, the FAQ entry is well worth reading; it explains in more depth what's going on than I am here.)
can you not use the [t] specifier instead of [p]?
In LaTeX figures, one can use \textwidth and \columnwidth to specify sizes of the graphic relative to the size of surrounding text, e.g.
\includegraphics[width=.5\textwidth]{myimage}.
I would like to easily switch from onecolumn to twocolumn template (and back) without the figure growing too large for onecolumn template. For twocolumn template (where \columnwidth is roughly half the \textwidth), I would like to have something like:
\includegraphics[width=.9\columnwidth]{myimage}.
and for onecolumn template (where \columnwidth and \textwidth are equal):
\includegraphics[width=.5\textwidth]{myimage}.
Now, I figured I could limit this using some kind of a min operator:
\includegraphics[width=min(.5\textwidth,.9\columnwidth)]{myimage} but this is invalid syntax. Is there something like this to solve this problem, possibly through the use of LaTeX macro system?
Although it's possible to write this sort of macro, I wouldn't want to hardcode it into each figure; how about something like this
\makeatletter
\newlength \figwidth
\if#twocolumn
\setlength \figwidth {0.9\columnwidth}
\else
\setlength \figwidth {0.5\textwidth}
\fi
\makeatother
and then use
\includegraphics[width=\figwidth]{myimage}
to insert the graphic.
\textwidth is the horizontal width of the page body and not really appropriate for your purposes.
\linewidth is the width of the current line; it will be updated appropriate to columns, indentation, etc.
The following paragraph produces a picture that should precisely fit the entire line width (i.e. no overful warning):
\noindent\includegraphics[width=\linewidth]{myimage}
If you prefer small margins on the left and right, you can use:
\begin{center}
\includegraphics[width=.9\linewidth]{myimage}
\end{center}
Or, if you want to specify the margins in an absolute size:
\usepackage{calc}
...
\begin{center}
\includegraphics[width=\linewidth-20pt]{myimage}
\end{center}
Hmm... the code above (\if#twocolumn etc.) is not working for me at all. No idea why not. :( tetex on osX using fink. Trying to use revtex4, so perhaps that's the problem. I really like the idea of this type of change because I'm going to be dorking with widths etc. for my thesis and various journal articles, and to have these distances specified with a macro may be helpful for these types of conversions.
Any comments greatly appreciated!
-Allen
Somebody else who is more familiar with this will probably answer, but note that you would also need to change your figure type to be figure* if you are going two-column.