I am using this http://jqueryui.com/demos/droppable/
But I have a problem dragging to a droppable that is smaller than the draggable.
It will not drop on the droppable, but on the top left of the droppable.
(source: yart.com.au)
Is there any way around this?
Here is the code, thanks.
$('.draggable').draggable({
revert: 'invalid',
revertDuration: 500,
appendTo: 'body',
helper: function(event, ui) {
return $(this).clone().appendTo('body').css('zIndex', 5).show();
},
drag: function(event, ui) {
$(ui.helper).removeClass("enlarge");
$(ui.helper).addClass("thumbnail");
$(this).hide();
},
stop: function(event, ui) {
$(this).show();
//$(this).addClass("enlarge");
if ($(this).parent().hasClass("imageContainer")) {
$(this).addClass("thumbnail");
}
else {
$(this).addClass("enlarge");
}
},
//cursorAt: { top: 30, left: 40 },
delay: 100,
refreshPositions: true
});
$('.imageContainer').droppable({
accept: '.draggable',
drop: function(event, ui) {
ui.draggable.css({
"position": "relative",
"left": "0px",
"top": "0px"
});
if ($(this).children().length == 0) {
// ui.draggable.addClass("thumbnail");
$(ui.draggable).appendTo(this);
$(this).removeClass("border");
}
},
over: function(event, ui) {
ui.draggable.removeClass("enlarge");
ui.draggable.addClass("thumbnail");
$(this).addClass("border");
},
out: function(event, ui) {
// ui.draggable.removeClass("zoomIn")
$(this).removeClass("border");
},
tolerance: 'intersect'
});
CSS:
.thumbnail {
height:60px;
margin-right:10px;
width:80px;
z-index:1;
}
.enlarge {
border:5px solid white;
height:145px;
width:195px;
}
$('.draggable').draggable({
revert: 'invalid',
revertDuration: 500,
appendTo: 'body',
helper: function(event, ui) {
return $(this).clone().appendTo('body').css('zIndex', 5).show();
},
drag: function(event, ui) {
/* $(ui.helper).removeClass("enlarge");
$(ui.helper).addClass("thumbnail"); */
$(this).hide();
},
stop: function(event, ui) {
$(this).show();
//$(this).addClass("enlarge");
if ($(this).parent().hasClass("imageContainer")) {
$(this).addClass("thumbnail");
}
else {
$(this).addClass("enlarge");
}
},
//cursorAt: { top: 30, left: 40 },
delay: 100,
refreshPositions: true
});
Try replacing your code with this block above and see if it comes close to what you want. It may not be perfect yet, but let's see if we can tackle one change at a time. What I'm hoping to observe is that it drops approximately like it should.
Related
I'm using jQueryMobile's swipe event with JQuery UI's draggable.
JSFiddle explains it best.
$('.draggable').draggable({
delay: 300,
cancel: false,
start: function(event, ui) {
// something needs to happen here?
},
stop: function(event, ui) {
},
revert: function(is_valid_drop) {
return true;
}
});
$('.swipe-area').on('swiperight', function(evt) {
alert('swiped right :(');
});
Basically, when you try to drag the dark blue box to the right, the swipe event gets triggered.
I want to prevent this when dragging. What would you recommend?
(JSFiddle solution would be awesome!)
You Can use flags on or off
Demo
http://jsfiddle.net/pzwwphL3/
Code
var drag;
$('.droppable').droppable({
accept: '.draggable',
drop: function(event, ui) {
}
});
$('.draggable').draggable({
delay: 300,
cancel: false,
start: function(event, ui) {
drag = "on"
// event.preventDefault();
// event.stopPropagation();
},
stop: function(event, ui) {
drag = "off"
},
revert: function(is_valid_drop) {
return true;
}
});
$('.swipe-area').on('swiperight', function(evt) {
if (drag == "off") {
alert('swiped right :(');
}
});
I've written a script for a simple jquery ui slider. There are two sliders (later I'll add more) and when you change their value, it displays below them, and then updates a total. What I'm having a hard time figuring out, is how to make it so as you're sliding the values are getting updated, instead of getting updated after you've finished.
Thanks for any help!
Fiddle of Demo
http://jsfiddle.net/tMmDy/
HTML
<div class="slider_1 slider"></div>
<p id="slider_1-value"></p>
<div class="slider_2 slider"></div>
<p id="slider_2-value"></p>
CSS
.slider {
width:100px;
height:5px;
background:blue;
}
JS
$(".slider").slider({
animate: "fast",
max: 25,
min: 0,
step: 1,
value: 10,
option: {}
});
$(".slider_1").on("slidechange", function (event, ui) {
total_1 = $(".slider_1").slider("value");
$("#slider_1-value").html(total_1);
total_value_update();
});
$(".slider_2").on("slidechange", function (event, ui) {
total_2 = $(".slider_2").slider("value");
$("#slider_2-value").html(total_2);
total_value_update();
});
function total_value_update() {
total_values = total_1 + total_2;
$("#total_value").html(total_values);
}
Use the slider's .slide() event and try it like this:
jsFiddle example
var total_1, total_2;
$(".slider").slider({
animate: "fast",
max: 25,
min: 0,
value: 10,
slide: function (event, ui) {
total_1 = $(".slider_1").slider("value");
total_2 = $(".slider_2").slider("value");
$("#slider_1-value").html(total_1);
$("#slider_2-value").html(total_2);
total_value_update();
},
change: function (event, ui) {
total_1 = $(".slider_1").slider("value");
total_2 = $(".slider_2").slider("value");
$("#slider_1-value").html(total_1);
$("#slider_2-value").html(total_2);
total_value_update();
}
});
function total_value_update() {
total_values = total_1 + total_2;
$("#total_value").html(total_values);
}
I am using jquery ui 1.7.2 alongwith jquery 1.3.2
The following script is causing drop event to be triggered twice.. I tried a lot of time but not able to figure out why?
any suggestions to fix this code
$("document").ready(function () {
$(".draggable").draggable({
revert: "invalid",
helper: "clone",
connectToSortable: ".column"
});
$(".column").droppable({
accept: ".draggable",
drop: function (event, ui) {
debugger;
var ordinalNo = 1;
$(".column .contentObject").each(function () {
ordinalNo = ordinalNo + 1;
});
var objectId = guidGenerator() + '_' + ordinalNo;
var objectType;
var contentObjContent = "<div id=\"" + objectId + "\" ><h2>[<span class=\"ordinal\"></span>] ";
if (event.srcElement.id === "tableobj") {
objectType = tableSource;
}
else if (event.srcElement.id === "chartobj") {
objectType = chartSource;
}
else if (event.srcElement.id === "textobj") {
objectType = textSource;
}
$.ajax({
url: "/ContentBuilder/ContentObject",
data: {
viewObjectId: objectId,
contentObjectId: null,
contentObjectTypeId: objectType,
contentObjSourceId: null,
ordinal: ordinalNo
},
type: "POST",
success: function (data) {
contentObjContent = data;
}
});
}
});
$(".column").sortable({
connectWith: '.column',
handle: 'h2',
cursor: 'move',
placeholder: 'placeholder',
forcePlaceholderSize: true,
opacity: 0.4,
update: function (event, ui) {
changeOrdinal();
if (event.srcElement.id.length <= 0) {
updateObjectOrdinals();
}
}
}).disableSelection();
$(".tablecolumn").sortable({
connectWith: '.tablecolumn',
handle: 'h2',
cursor: 'move',
placeholder: 'placeholder',
forcePlaceholderSize: true,
opacity: 0.4,
update: function (event, ui) {
changeColumnOrdinal();
}
}).disableSelection();
});
becouse you use dropable AND sortable on the same selector $(".column"). I think both triggering a drop.
This function takes an li element and adds it to another ul element. After this code is fired the jquery events attached to the children spans of the li element do not fire the first time they are clicked.
function AddToDropBox(obj) {
$(obj).children(".handle").animate({ width: "20px" }).children("strong").fadeOut();
$(obj).children("span:not(.track,.play,.handle,:has(.btn-edit))").fadeOut('fast');
$(obj).children(".play").css("margin-right", "8px");
$(obj).css({ "opacity": "0.0", "width": "284px" }).animate({ opacity: "1.0" });
if ($(".sidebar-drop-box ul").children(".admin-song").length > 0) {
$(".dropTitle").fadeOut("fast");
$(".sidebar-drop-box ul.admin-song-list").css("min-height", "0");
}
if (typeof SetLinks == 'function') {
SetLinks();
}
if(document.getElementById("ctl00_cphBody_hfRemoveMedia").value===""||document.getElementById("ctl00_cphBody_hfRemoveMedia").value===null)
{
document.getElementById("ctl00_cphBody_hfRemoveMedia").value=(obj).attr("mediaid");
}
else
{
var localMediaIDs=document.getElementById("ctl00_cphBody_hfRemoveMedia").value;
localMediaIDs= localMediaIDs.replace((obj).attr("mediaid"),"");
document.getElementById("ctl00_cphBody_hfRemoveMedia").value=localMediaIDs+", "+(obj).attr("mediaid");
}
}
Is there something missing in this code that would cause that?
UPDATE
thats exactly what I am using for the jquery sortable feature that actually calls the addtoDropbox Method().
// Make our dropbox a selectable & sortable.
$(".sidebar-drop-box ul").sortable({
connectWith: '.admin-left',
tolerance: "intersect",
handle: ".handle",
opacity: "0.5",
receive: function(event, ui) {
**AddToDropBox(ui.item)**;
},
start: function(event, ui) {
$(".sidebar-drop-box ul.admin-song-list").css("min-height", "70px");
isDraggingSong = true;
//soundManager.stopAll();
//$(".btn-stop").removeClass("btn-stop");
},
stop: function(event, ui) {
if ($(".sidebar-drop-box ul").children("li").length == 0) {
$(".dropTitle").fadeIn();
}
}
}); //.selectable({ filter: 'li', cancel: '.btn-stop,.btn-play,.notes,.btn-del,span.remove' });
// Do the same for our playlist.
$(".admin-left").sortable({
opacity: '0.5',
tolerance: "intersect",
handle: ".handle",
appendTo: 'appentToHolder',
items: "li.admin-song",
update: function(event, ui) {
$(ui.item).css("opacity", "0.0").animate({ opacity: "1.0" }, "medium");
if ($.browser.msie && $.browser.version == "7.0") {
$(ui.item).css("margin-bottom", "-6px");
}
},
receive: function(event, ui) {
AddToLeftList(ui.item);
},
start: function(event, ui) {
$(".admin-left li.ui-selected").removeClass("ui-selected");
isDraggingSong = true;
//soundManager.stopAll();
//$(".btn-stop").removeClass("btn-stop");
},
stop: function(event, ui) {
CheckLeftList();
},
connectWith: '.sidebar-drop-box ul'
}).selectable({ filter: 'li.admin-song', cancel: '.head *,.btn-stop,.btn-play,.notes,.btn-del,span.remove' }); // added .head * to fix bug# 1013
the bold line calls the function I added previously, which places the li element.
I am not sure exactly where the disconnect happens, but i know between these 2 code segments that it breaks something and the next click doesn't not work on the source ul. i ahve been struggling with this for days. I cant turn this back to my boss this shape...lol
thanx
It doesn't look like this function is adding something to a list.
This function first does a couple of
CSS changes to obj and it's
descendants.
Then it goes and calls the global
function SetLinks (if it is
defined).
And thirdly it sets the value of
the element
"ctl00_cphBody_hfRemoveMedia", which
is probably some kind of input.
Looks like this was pasted together from at least two other functions and would need refactoring.
I'm guessing that the cause for your lost events might be somewhere near a call to AddToDropBox.
I'm creating a Web interface for a table in Mysql and want to use jQuery dialog for input and edit. I have the following code to start from:
$("#content_new").dialog({
autoOpen: false,
height: 350,
width: 300,
modal: true,
buttons: {
'Create an account': function() {
alert('add this product');
},
Cancel: function() {
$(this).dialog('close');
$.validationEngine.closePrompt(".formError",true);
}
},
closeText: "Sluiten",
title: "Voeg een nieuw product toe",
open: function(ev, ui) { /* get the id and fill in the boxes */ },
close: function(ev, ui) { $.validationEngine.closePrompt(".formError",true); }
});
$("#newproduct").click(function(){
$("#content_new").dialog('open');
});
$(".editproduct").click(function(){
var test = this.id;
alert("id = " + test);
});
So when a link with the class 'editproduct' is clicked it gets the id from that product and I want it to get to the open function of my dialog.
Am I on the right track and can someone help me getting that variable there.
Thanks in advance.
Set a variable eg the_id on top of everything in your script and try this code:
$("#newproduct").click(function(){
$("#" + the_id).dialog('open');
});
$(".editproduct").click(function(){
the_id = this.id;
});
Thanks Sarfraz you were right about the variable. For others interest the full code is now:
$(document).ready(function() {
var id = 0;
$("#content_new").dialog({
autoOpen: false,
height: 350,
width: 300,
modal: true,
buttons: {
'Create an account': function() {
alert('add this product');
},
Cancel: function() {
$(this).dialog('close');
$.validationEngine.closePrompt(".formError",true);
}
},
closeText: "Sluiten",
title: "Voeg een nieuw product toe",
open: function(ev, ui) { alert(id); },
close: function(ev, ui) { $.validationEngine.closePrompt(".formError",true); }
});
$("#newproduct").click(function(){
$("#content_new").dialog('open');
});
$(".editproduct").click(function(){
id = this.id;
$("#content_new").dialog('open');
});
$("#new").validationEngine();});
And on the opening of the modal dialog box i get the correct ID.