I'm developing an application on two different machines (home and work) and while the home one seems to run just fine, the work one is, for lack of a better word, possessed. It has been exhibiting the following issues:
When loading the application, it will start at the simulator's main screen instead of starting the application at random intervals. You can start the application and have it work fine, then close the simulator, reload, and have the same codebase not load.
Going to applications doesn't show the application itself, in fact it never does.
Trying to load the applications cod file (File->load java program) never works. Tried the steps in this thread, with unreliable results.
Extremely small changes, such as modifying the value of a width variable by one, commenting out a function such as makeMenu or adding a button will cause code to no longer work, with no errors shown by the IDE.
Using clear.bat with sometimes work, sometimes not. Same with manually removing all files with the name of the project.
reinstalling the eclipse environment and the blackberry plugin did nothing more then burn off an hour.
having "load on startup" in the blackberry_app_descriptor.xml file is set.
Both systems are using Eclipse 3.5.1, BB plugin for eclipse 1.1 beta, Java 4.5 with the 8300 simulator. THe only difference that I am seeing is the operating system between the two systems. The work one being XP Sp3, home being vista. THe vista one isn't perfect, but I can test variable changes without flipping a coin to see if the app will even load or not.
I've tried the solutions that were similar on this forum, such as this one, but it looked to be that those solutions are dated as none of the options for the steps existed in my eclipse install.
So has anyone ran into such baffling behavior, and can it be fixed? Anything that I might have missed that could be tried?
I've been seeing this behavior with the new 1.1 plugin, the application doesn't load on startup and the FIle->load java program doesn't help. For me, the solution was I have to run a clean build every time, that is the eclipse clean and build instead of just build, not the clean.bat... Hope this helps!
Try clearing resources that have improper naming structure in your projects stuff with spaces or special character in the name of the file.
It took me two days to figure out.
One solution i got regarding your problem.
As I See Please run the application first time as Run as blackberry simulator
that is got start and here pick up run and then Run as Blackberry simulator
Related
When I'm editing a single file in Xcode, it takes several seconds to any kind of syntax error to show up. Sometimes errors don't even show up until I go to the menu and build manually. It makes development awfully slow as I have to constantly wait to check if I miswrote something...
I don't think it's because of the machine, though its a Macbook Air, but I do Android development on this machine too, and Android Studio can show me syntax errors just fine.
Is there any way to make this part faster? Or I need a better machine?
I'm new to Xamarin/Android, and so far it's been a pretty frustrating experience, compounded by code/AXML changes seemingly not being built or deployed to the emulator. I often find that a change I've just made seems to get ignored when I build and run the app.
My suspicions were confirmed when it started throwing an exception on a line in MainActivity.cs that I had commented out. Cleaning and rebuilding didn't help, and in the end deleted the bin and obj folders and uninstalled the app off the emulator for good measure (not sure which of these fixed it though).
Is it just me or is this a common issue? Is there anything I can do to prevent it from happening? I'm using VS2015 Community by the way.
Go to 'Tools/Configuration Manager' and make sure that both 'Build' and 'Deploy' options are checked for 'YourApp.Android' for active solution configuration and active solution platform. Then do 'Clean solution' and 'Rebuild solution', it should always work.
It looks like this is a common issue, as yet unresolved.
One of the comments in the above thread suggested that the problem can occur if you've only changed C# code, and unless you also "touch" one of the xml or axml files then the latest version won't be deployed. This seemed to do the trick in my case but it could have been a coincidence - Xamarin seems to be a temperamental beast, and will randomly fail to build or deploy on occasion, perhaps depending on the wind direction, or colour of my underwear that day.
I'm still in the early stages of learning Xamarin/Android, but if I don't enjoy the experience then I'll be jumping ship to Android Studio (although I'd prefer to stick with C# if I can).
When I compile a project in XE8 (with update 1), I get frequently a error that a file is missing, although the file is just available. And when I compile again, it is another file that is missing. It seems random. After a few compiles (sometimes more or less) I have build the project. And even at Run (F9) I sometimes get the error that a file is missing.
Like #Andrei Galatyn said at the end of his post, it will be solved when you delete your Android configuration in SDK versions. But I want to be able to develop with Android. What is the real problem?
I couldn't find a solution on the internet yet.
Is there a solution for this problem? Thanks in advance!
I have similar problem with Delphi XE8/XE7 at least at 3 different PCs (home PC, notebook, VMW-based virtual machine in office). All PCs are fast, all are SSD-based. Usually i get the error message when trying to build large project, for small projects errors are very rare (but happens time to time anyway). So i am quite sure that it is problem with Delphi. What i tried:
added src/dcu paths as exception to antivirus
disabled indexing of files in Windows (Windows 7 x64/Windows 8.1 x64)
deleted all SDKs for mobile development in IDE (this step was most usefull in my case).
It doesn't solve the problem for 100%, but now i see that random message only few times per week. I will be glad to see real solution.
Just for information - many errors like "file YYY\XXX.pas not found" where with wrong path to the file, it was path somewhere inside of Android SDK. After deleting of all SDKs (fortunately i need only with Win x32/x64 platforms) i never see such errors anymore.
Some time ago i sent it to my colleagues:
Many times i got an sporadic error in Delphi IDE like this:
F2039 Could not create output file '.\dcu\FireDAC.Comp.DataSet.dcu'
When I just tried to compile again, the problem disappeared but compilation may fail on another file. It was especially annoying when I need to rebuild an large project, for example <...>. Finally I discovered that under some conditions Delphi is trying to access files at wrong path:
C:\Users\Public\Documents\RAD Studio\12.0\PlatformSDKs\adt-bundle-windows-x86-20130522\sdk\tools\dcu\FireDAC.Comp.DataSet.dcu
Instead of
C:\M2014\Fellesressurser\felles\FireDAC.Comp.DataSet.dcu
All the time when I get the error it was try to access Android SDK folder instead of my application folder.
If you experienced same problem, you can solve it now, just delete Android SDK from Delphi IDE:
Open “Tools\Options\Environment Options\SDK Manager”
Select installed SDK (list “SDK versions”)
Delete it (button “Delete”)
I've been working on an MVC 5 code first project for a few months and (seemingly) out of nowhere, Visual Studio is refusing to debug and giving me some strange errors.
When I try to run the application Ctrl+F5 it builds ok but the browser never gets beyond the loading stage, I still have the pinwheel in the browser tab, but the app never loads.
When I try to debug the applicaiton F5 it builds ok, but then comes up with 2 errors, firstly Debugging information for iisexpress.exe cannot be found or does not match. Cannot find or open the PDB file. and then Process with an Id of xxxx is not running.
I've tried loading symbols from MS (https://stackoverflow.com/a/8138518/1778169), using a different database name, uninstalling VS extensions, performing all Windows Updates, repairing the VS installation and even reinstalling VS entirely. Nothing seems to help.
I'm not very familiar with PDB files, but I have done nothing knowingly to change this, and they seem to be in the right place:
I am running out of ideas, but really want to avoid a Windows reinstall if possible.
It's only happening in this one project, so the problem would seem to be with the project itself, not the installation. But I have no idea where to start debugging this problem, or looking for a solution.
Possibly Relevant
I tried running the app on a custom domain (set up in the hosts file and IIS Express's ApplicationHosts.config file). In an attempt to solve this problem I reverted these settings back to the default localhost:[port]. This doesn't seem to have made any difference, but thought I should mention it just in case.
My problem was that the Native Code box was ticked in the Debuggers section of the Web section in Project Properties.
I don't know how this came to be ticked, I certainly never ticked it.
Either way, unticking this box solved my problem.
I am trying to use an application called CLUT.exe which is an old application for MS-DOS that can be used to reindex NTX files for DBF databases.
(This is not the main topic, but I am just writing this if someone wants to test the app and don't trust at all about the content).
The problem starts when trying to run the command line version through console (cmd.exe) and this error appears:
C:\>CLUT.exe [arg1] [arg2] [arg3]
run-time error R6009
- not enough space for environment
So, according to what I've searched, this could be a possible solution:
http://support.microsoft.com/default.aspx?scid=kb;en-us;230205
but it doesn't work and every alternative that I found to solve this over the internet is the same.
Another alternative could be to make right-click in the .exe file, go to Properties then Memory tab and increase the Initial environment memory from Auto to the max value but it doesn't work too.
Well, I am stuck and no "possible" solution is working for me. If someone is interested, knows more about this issue and want to test, you can download the application from here (click "Free Download" green button):
http://www.filebasket.com/free/Development-Clipper-programming-language/clut-exe/13996.html
or directly from my DropBox:
https://dl.dropbox.com/u/15208254/stackoverflow/clut_214.rar
Just to know, I am using Windows 7 and the CLUT.exe application is a Clipper based app (old programming language) that may run under windows console (cmd.exe).
Wikipedia does mention other dos emulators but, oddly, doesn't mention BOCHS.
Reindexing NTX files is not a difficult thing to do, and can be done with tools other than CLUT. For example, many of the utilities listed on this part of Download32 could be used. Otherwise, you could write your own using Harbour Project or xHarbour. Or contact me off list and I'll cook up something in Clipper 5.3.
LATER
If I read the README correctly for CLUT, it's a replacement for the DBU utility that comes with Clipper 5.x. I can supply you with a build of that if you're unsuccessful with other approaches.