Suddenly in my document all definitions of \subsubsection*{Title Text} stopped working properly.
The subsubsection number is displayed in the generated PDF and the title of the subsubsection is "*" (only the asterisk). The actual title text is displayed at the beginning of the first paragraph.
Excact code: \subsubsection*{Failure Semantics}
I'm not sure what happened. I only remember fixing some broken references...
Cleaning the output folder didn't help. Any ideas?
Thanks in advance.
bja
check
http://latex.silmaril.ie/formattinginformation/chapter3.html#sections
only add at the start of your chapter .tex
\setcounter{secnumdepth}{3}
add in the preamble
\setcounter{secnumdepth}{3}
to include subsubsections in the table of contents you will have to add also the line
\setcounter{tocdepth}{3}
Allright, solved thx to svn diff. :)
The bad line was \usepackage{amsmath}! Weird.
I'll just have to use array instead of pmatrix then. :/
Thanks all.
Related
I have a problem with my biblatex. My booktitles don't automaticly break lines in my bibliography. Has someone got a hint how to solve this? Is it possible to get an automatic break or do I have to set them manually? And if I so, how do I do that?
Here my biblatex code snippets:
\usepackage[backend=biber,style=authoryear,sorting=nyt,citestyle=authoryear]{biblatex}
\printbibliography[type=book,title={Books}]
See this example at IEEE: after Metrics is a linebreak is missing.
EDIT: I found the solution here
I was curious about the \emph{} style (mine was always underlining). I put a single \normalem in front of the \printbibliography command and it works fine :)
\normalem
\printbibliography[type=book,title={Books}]
Your book titles are underlined, which is preventing line breaks (underlined text doesn't break). I don't think this is a standard behavior, book titles are usually displayed in italics. Perhaps you are using \underline{} inside your bibliography items definitions?
I am using these commands for including references:
\addcontentsline{toc}{chapter}{References}
\bibliographystyle{agsm}
\bibliography{dissrefs}
The problem is that in the table of contents both References and Bibliography appear, while I just want one to appear. Why is this happening? Can I customise the table of contents entry to be just one of them?
I am using MikTex 2.8 and TexMaker 2.1.
I dont think that you need to use \addcontentsline{toc} bibtex should do it automatically. At least I don't recall ever needing it...
Have you tried commenting out that line?
Edit regarding OPs comment on changing the title of the bibliography:
The bibliography's title can be changed by (to for instance "New Title") using \renewcommand\refname{New Title} for articles and \renewcommand\bibname{New Title} for books.
Instructions are read and processed in the order they appear, I think your problem is related to that order. Try moving things around (I believe that all settings should be put before \tableofcontents, but I'm not sure about that, I'v not used latex for a long time)
I made a table of contents using \tableofcontents Each section is made using \section yet when I do \subsection it is not listed in the table. How do I get it to list there? Thanks.
Which document class are you using? I just tested it for article, and it works fine. In any case, try using this in the preamble:
\setcounter{tocdepth}{2}
Increase 2 if you want to list subsubsection, etc.
Add:
\setcounter{tocdepth}{5}
to the preamble.
See: http://www.devdaily.com/blog/post/linux-unix/latex-setting-table-of-contents-toc-depth
#WhirlWind and #Steve_Tjoa got it and helped me too! One thing though, whatever you set the tocdepth counter to, you may also want to set the secnumdepth.
so i used
\setcounter{tocdepth}{5}
as suggested by #Whirlwind but then the subsubsection in my Table of Contents wasn't numbered. so I added the following to get it to work (thanks to the following link where i found the answer http://www.latex-community.org/viewtopic.php?f=5&t=2351#p9197 )
\setcounter{secnumdepth}{5}
I would like to know how I can hide a section from the table of contents but without loosing the section number in the body of the document. For example, in this tex file I loose the number for hide, and all the sequences are damaged:
\documentclass{article}
\begin{document}
\tableofcontents
\section{uno}
\section{dos}
\section*{hide}
\section{tres}
\end{document}
I think you are looking for
\section*{hide}
\addtocounter{section}{1}
or make it into a command:
\newcommand{\toclesssection}[1]{\section*{#1}\addtocounter{section}{1}}
EDIT:
Okay, I think I understand what is wanted now (and it makes more sense then the answer I gave). Here is a command that you can use to suppress adding a section, subsection, etc. to the TOC. The idea is to temporarily disable \addcontentsline.
\newcommand{\nocontentsline}[3]{}
\newcommand{\tocless}[2]{\bgroup\let\addcontentsline=\nocontentsline#1{#2}\egroup}
...
\tocless\section{hide}
\tocless\subsection{subhide}
Just wanted to say thanks for Ivans great hint!
(I was just googling for something similar for my customized (Sub)Appendix{} commands:
\newcommand{\nocontentsline}[3]{}
\newcommand{\tocless}[2]{\bgroup\let\addcontentsline=\nocontentsline#1{#2}\egroup}
\newcommand{\Appendix}[1]{
\refstepcounter{section}
\section*{Appendix \thesection:\hspace*{1.5ex} #1}
\addcontentsline{toc}{section}{Appendix \thesection}
}
\newcommand{\SubAppendix}[1]{\tocless\subsection{#1}}
Maybe this is useful for someone else, too...)
have just come here from a similar question. The answer above didn't quite work as it gave some formatting issues, but a similar solution seemed to do the trick
When a URL is over a line and goes onto a second line, the hyperlink only uses the first line. Is there a way to get around this and yet still have the URL on multiple lines?
You should use the url package:
\usepackage{url}
...
\url{http://long.url.com/... .../stuff}
and it will break it for you at an appropriate place.
I suggest using package:
\usepackage{xurl}
This works fine for me on overleaf.
Example:
\url{https://www.tudelft.nl/ewi/over-de-faculteit/afdelingen/intelligent-systems/pattern-recognition-bioinformatics/pattern-recognition-laboratory/data-and-software/dd-tools/}
At the preamble, just put \usepackage{breakurl} somewhere after \usepackage{hyperref}. The \burl command is defined and, by default, the package also turns the \url command into a synonym of \burl.
Do it the following way. You are good to go!
\begin{document}
\sloppy
For me only this worked:
\PassOptionsToPackage{hyphens}{url}
\usepackage{hyperref}
and with this code to add line breaks after every normal alphabetic character and with *-~'":
\expandafter\def\expandafter\UrlBreaks\expandafter{\UrlBreaks% save the current one
\do\a\do\b\do\c\do\d\do\e\do\f\do\g\do\h\do\i\do\j%
\do\k\do\l\do\m\do\n\do\o\do\p\do\q\do\r\do\s\do\t%
\do\u\do\v\do\w\do\x\do\y\do\z\do\A\do\B\do\C\do\D%
\do\E\do\F\do\G\do\H\do\I\do\J\do\K\do\L\do\M\do\N%
\do\O\do\P\do\Q\do\R\do\S\do\T\do\U\do\V\do\W\do\X%
\do\Y\do\Z\do\*\do\-\do\~\do\'\do\"\do\-}%
answer complited from this site:
https://tex.stackexchange.com/questions/3033/forcing-linebreaks-in-url/10401
What packages (hyperref,url) and drivers (pdftex, dvips, etc.) are you using? Are you using the breaklinks option to hyperref?
According to the TeX FAQ you might want to try the breakurl package, though it appears you may simply be out of luck in some cases.
What worked best for me (with pdflatex) was
\usepackage[pdftex]{hyperref}
and then just \url{http://stackoverflow.com/} to create URLs. It only broke URLs at . and /, which was okay for my document. Importantly, other approaches I tried created PDFs where only the first line of the URL was a clickable link, and the destination URL was truncated to this portion, which is pretty confusing and bad.
Long URLs that contain underscores (_) in path segments will not be broken when using \PassOptionsToPackage{hyphens}{url}\usepackage{hyperref}. However, I found that I could solve this problem by manually breaking lines in the displayed label using \\\\, like this:
\href{http://www.researchgate.net/profile/Nick\_Brooks2/publication/220012411\_Cultural\_responses\_to\_aridity\_in\_the\_Middle\_Holocene\_and\_increased\_social\_complexity/links/0922b4f398ad68bc96000000.pdf}{http://www.researchgate.net/profile/Nick\_Brooks2/publication/220012411\_\\Cultural\_responses\_to\_aridity\_in\_the\_Middle\_Holocene\_and\_increased\_social\_\\complexity/links/0922b4f398ad68bc96000000.pdf}
This results in URLs that are a bit prettier (IMO) than the use of \usepackage{breakurl} and \burl, as suggested by Debajyoti Mondal, and allows you to display the full URL if you wish.
There is a simple answer. Use \usepackage[hidelinks]{hyperref} before \begin{document}