What is the benefit of using paragraphs and sections for executing pieces of code, instead of using a subprogram instead? As far as I can see paragraphs and sections are dangerous because they have an non intuitive control flow, its easy to fall through and execute stuff you never meant to execute, and there is no variable (item) scoping, therefore it encourages a style of programming where everything is visible to everything else. Its a slippery soup.
I read a lot, but I could not find anything related to the comparative benefit of paragraphs/sections vs a subprogram. I also asked online some people in some COBOL forum, but their answers were along the lines of "is this a joke" or "go learn programming"(!!!).
I do not wish to engage in a discussion of stylistic preferences, everyone writes the way that their brain works, I only want to know, is there any benefit to using paragraphs/sections for flow control? As in, are there any COBOL operations that can be done only by using paragraphs/sections? Or is it just a remnant of an early way of thinking about code?
Because no other language I know of has mimicked that, so it either has some mechanical concrete essential reason to exist in COBOL, or it is a stylistic preference of the COBOL people. Can someone illuminate me on what is happening?
These are multiple questions... the two most important ones:
Are there any COBOL operations that can be done only by using paragraphs/sections?
Yes. A likely not complete list:
USE statements in DECLARATIVES can only apply to a paragraph or a section. These are used for handling file errors and exceptions. Not all compilers support this COBOL standard feature in full.
Segmentation (primary: a program that is only partially loaded in memory) is only possible with sections; but that is to be considered a "legacy feature" (at least I don't know of people actually using it this way explicitly); see the comment of Gilbert Le Blanc for more details on this
fall-through, many other languages have this feature with a kind of a switch statement (COBOL's EVALUATE, which is not the same as a common switch but can be used similar has an explicit break and no fall-through)
GO TO DEPENDING ON (could be recoded to achieve something similar with EVALUATE and then either PERFORM, if the paragraphs are expected to fall-through, which is not uncommon, then that creates a lot of extra code)
GO TO in general and especially nice - the old obsolete ALTER statement
PERFORM statement, format 1 "out-of-line"
file state is only shared between programs when you define it as EXTERNAL, and you often want to have a file state being limited to a single program
up to COBOL85: EXIT statement (plain without anything else, actually doing nothing else then a CONTINUE would)
What is the benefit of using paragraphs and sections for executing pieces of code, instead of using a subprogram instead?
shared data (I guess you know of programs with static data or otherwise (module)global data that is shared between functions/methods and also different source code files)
much less overhead than a CALL is
consistency:
you know what's in your code, you don't know what another program does (or at least: you cannot guarantee that it will do the same some years later exactly the same)
easier to extend/change: adding another variable (and also removing part of it, change its size) to a CALL USING means that you also have to adjust the called program - and all programs that call this, even when you place the complete definition in a copybook, which is very reasonable, this means you have to recompile all programs that use this
a section/paragraph is always available (it is already loaded when the program runs), a CALLed program may not be available or lead to an exception, for example because it cannot be loaded as its parameters have changed
less stuff to code
Note: While not all compilers support this you can work around nearly all of the runtime overhead and consistency issue when you use one source files with multiple program definitions in (possibly nested) and using a static call-convention. This likely gives you the "modern" view you aim for with scope-limitation of variables, within the programs either persistent (like local-static) when defined in WORKING-STORAGE or always passed when in LINKAGE or "local-temporary" when in LOCAL-STORAGE.
Should all code of an application be in one program?
[I've added this one to not lead to bad assumptions] Of course not!
Using sub-programs and also user-defined functions (possibly even nested providing the option for "scoped" and "shared" data) is a good thing where you have a "feature boundary" (for example: access to data, user-interface, ...) or with "modern" COBOL where you have a "language boundary" (for example: direct CALLs of C/Java/whatever), but it isn't "jut for limiting a counter to a section" - in this case: either define a variable which state is not guaranteed to be available after any PERFORM or define one for the section/paragraph; in both cases it would be reasonable to use a prefix telling you this.
Using that "separate by boundary" approach also takes care of the "bad habit of everything being seen by everyone" issue (which is in any case only true for "all sections/paragraphs in the same program).
Personal side note: I would only use paragraphs where it is a "shop/team rule" (it is better to stay consistent then to do things different "just because they are better" [still providing an option to possibly change the common rule]) or for GO TO, which I normally not use.
SECTIONs and EXIT SECTION + EXIT PERFORM [CYCLE] (and very rarely GOBACK/EXIT PROGRAM) make paragraphs nearly unnecessary.
very short answer. subroutines!!
Subroutines execute in the context of the calling routine. Two virtues: no parameter passing, easy to create. In some languages, subroutines are private to (and are part of) the calling (invoking) routine (see various dialects of BASIC).
direct answer: Section and Paragraph support a different way of thinking about programming. Higher performance than call subprogram. Supports overlays. The "fall thru" aspect can be quite useful, a feature rather than a vice. They may be necessary depending on what you are doing with a specific COBOL compiler.
See also PL/1, BAL/360, architecture 360/370/...
As a veteran Cobol dinosaur, I would say asking about the benefit is not the right question. I used paragraph (or section) differently than a subprogram. The right question in my opinion is when to use them logically. If I can make an analogy, if you have a Dog java class, you will write Dog-appropriate methods within it. If there's a cat involved, you may need a helper class. In this case the helper class is the subprogram. Though, you can instead code the helper class methods inside the Dog class, but that will be bad coding.
In any other language I would recommend putting self contained functions into subroutines.
However in COBOL not so much. If the code is very likely to be used in other programs then a subroutine is a good idea. Otherwise not!
The reason being the total lack of any checks on the number type or existence of passed parameters at compile time. Small errors in call statements lead to program crashes at run time. Limiting the use of sub-routines and carefully checking the calling code for errors makes for a more reliable program.
Using paragraphs any type mismatch will be flagged at compile time, or, an automatic conversion will occur.
What is the rationale behind allowing rebinding of variables in Elixir, when Erlang doesn't allow that?
Most functional languages don't allow rebinding of variables in the same scope. So Elixir allowing this does definitely give it an non-functional, imperative feel. Erlang's problem is rather lack of scope, or to be more precise that there is only one scope in a whole function clause. We did have serious discussions whether to introduce scope but in the end we decided against it as it was backwards incompatible with the existing system. And developers hate backwards inconsistent changes.
The Erlang way has one serious benefit: when you get it wrong you generally get an error so you can SEE the mistake. This compared just getting strange behaviour when a variable doesn't have the value you expect it to have which is MUCH harder to detect and correct.
Personally I think that the problem of new variable names, for example using the number scheme, is greatly overblown. Compared to the time it takes me to work out WHAT I am going to do changing variable names is trivial. And after a while you just see it without reflecting about it. Honestly.
EDIT:
Also when chaining data through a sequence of functions the actual meaning of the data changes so reusing the same variable name can be very misleading. It can end up just meaning a generic "data I am passing from one function to another".
Here's the rationale straight from the horse's mouth:
http://blog.plataformatec.com.br/2016/01/comparing-elixir-and-erlang-variables/
Because it's simpler.
Take a look at this question posted to the Erlang mailing list in 2009. Specifically this part:
I like pattern matching in the majority of cases, but I find I write
enough code where I need to incrementally update a data structure, and
maintaining that code is a pain when I have code like:
X = foo(),
X1 = bar(X),
X2 = xyzzy(X1),
blah(X2).
and later want to change it to:
X = foo(),
X1 = whee(X),
X2 = bar(X1),
X3 = xyzzy(X2),
blah(X3).
Editor's note--this is the reply to that question.
This goes through IRC a lot. This is a result of poor variable naming
practice, and there is no need to introduce rebinding to "fix" it;
just stop using single letters and counters as variable names.
If for example that was written
FooStateX = foo(),
PostBarX = bar(FooStateX),
OnceXyzziedX = xyzzy(PostBarX),
blah(OnceXyzziedX).
The code demonstrated there isn't all that uncommon in Erlang (note the remark "this goes through IRC a lot"). Elixir's ability to simply rebind names saves us from having to generate new dummy names for things all the time. That's all. It's wise to bear in mind that the original creators of Erlang weren't trying to build a functional language. They were simply pragmatic developers who had a problem to solve. Elixir's approach is simple pragmatism.
Are there any downsides to passing in an Erlang record as a function argument?
There is no downside, unless the caller function and the called function were compiled with different 'versions' of the record.
Some functions from erlangs standard library do indeed use records in their interfaces (I can't recall which ones, right now--but there are a few), but in my humble opinion, the major turnoff is, that the user will have to include your header file, just to use your function.
That seems un-erlangy to me (you don't ever do that normally, unless you're using said functions from the stdlib), creates weird inter-dependencies, and is harder to use from the shell (I wouldn't know from the top of my head how to load & use records from the shell -- I usually just "cheat" by constructing the tuple manually...)
Also, handling records is a bit different from the stuff you usually do, since their keys per default take the atom 'undefined' as value, au contraire to how you usually do it with proplists, for instance (a value that wasn't set just isn't there) -- this might cause some confusion for people who do not normally work a lot with records.
So, all-in-all, I'd usually prefer a proplist or something similar, unless I have a very good reason to use a record. I do usually use records, though, for internal state of for example a gen_server or a gen_fsm; It's somewhat easier to update that way.
I think the biggest downside is that it's not idiomatic. Have you ever seen an API that required you to construct a record and pass it in?
Why would you want to do something that's going to feel foreign to any erlang programmer? There's a convention already in use for optional named arguments to functions. Inventing yet another way without good cause is pointless.
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 7 years ago.
Improve this question
I'm building an application that receives source code as input and analyzes several aspects of the code. It can accept code from many common languages, e.g. C/C++, C#, Java, Python, PHP, Pascal, SQL, and more (however many languages are unsupported, e.g. Ada, Cobol, Fortran). Once the language is known, my application knows what to do (I have different handlers for different languages).
Currently I'm asking the user to input the programming language the code is written in, and this is error-prone: although users know the programming languages, a small percentage of them (on rare occasions) click the wrong option just due to recklessness, and that breaks the system (i.e. my analysis fails).
It seems to me like there should be a way to figure out (in most cases) what the language is, from the input text itself. Several notes:
I'm receiving pure text and not file names, so I can't use the extension as a hint.
The user is not required to input complete source codes, and can also input code snippets (i.e. the include/import part may not be included).
it's clear to me that any algorithm I choose will not be 100% proof, certainly for very short input codes (e.g. that could be accepted by both Python and Ruby), in which cases I will still need the user's assistance, however I would like to minimize user involvement in the process to minimize mistakes.
Examples:
If the text contains "x->y()", I may know for sure it's C++ (?)
If the text contains "public static void main", I may know for sure it's Java (?)
If the text contains "for x := y to z do begin", I may know for sure it's Pascal (?)
My question:
Are you familiar with any standard library/method for figuring out automatically what the language of an input source code is?
What are the unique code "tokens" with which I could certainly differentiate one language from another?
I'm writing my code in Python but I believe the question to be language agnostic.
Thanks
Vim has a autodetect filetype feature. If you download vim sourcecode you will find a /vim/runtime/filetype.vim file.
For each language it checks the extension of the file and also, for some of them (most common), it has a function that can get the filetype from the source code. You can check that out. The code is pretty easy to understand and there are some very useful comments there.
build a generic tokenizer and then use a Bayesian filter on them. Use the existing "user checks a box" system to train it.
Here is a simple way to do it. Just run the parser on every language. Whatever language gets the farthest without encountering any errors (or has the fewest errors) wins.
This technique has the following advantages:
You already have most of the code necessary to do this.
The analysis can be done in parallel on multi-core machines.
Most languages can be eliminated very quickly.
This technique is very robust. Languages that might appear very similar when using a fuzzy analysis (baysian for example), would likely have many errors when the actual parser is run.
If a program is parsed correctly in two different languages, then there was never any hope of distinguishing them in the first place.
I think the problem is impossible. The best you can do is to come up with some probability that a program is in a particular language, and even then I would guess producing a solid probability is very hard. Problems that come to mind at once:
use of features like the C pre-processor can effectively mask the underlyuing language altogether
looking for keywords is not sufficient as the keywords can be used in other languages as identifiers
looking for actual language constructs requires you to parse the code, but to do that you need to know the language
what do you do about malformed code?
Those seem enough problems to solve to be going on with.
One program I know which even can distinguish several different languages within the same file is ohcount. You might get some ideas there, although I don't really know how they do it.
In general you can look for distinctive patterns:
Operators might be an indicator, such as := for Pascal/Modula/Oberon, => or the whole of LINQ in C#
Keywords would be another one as probably no two languages have the same set of keywords
Casing rules for identifiers, assuming the piece of code was writting conforming to best practices. Probably a very weak rule
Standard library functions or types. Especially for languages that usually rely heavily on them, such as PHP you might just use a long list of standard library functions.
You may create a set of rules, each of which indicates a possible set of languages if it matches. Intersecting the resulting lists will hopefully get you only one language.
The problem with this approach however, is that you need to do tokenizing and compare tokens (otherwise you can't really know what operators are or whether something you found was inside a comment or string). Tokenizing rules are different for each language as well, though; just splitting everything at whitespace and punctuation will probably not yield a very useful sequence of tokens. You can try several different tokenizing rules (each of which would indicate a certain set of languages as well) and have your rules match to a specified tokenization. For example, trying to find a single-quoted string (for trying out Pascal) in a VB snippet with one comment will probably fail, but another tokenizer might have more luck.
But since you want to perform analysis anyway you probably have parsers for the languages you support, so you can just try running the snippet through each parser and take that as indicator which language it would be (as suggested by OregonGhost as well).
Some thoughts:
$x->y() would be valid in PHP, so ensure that there's no $ symbol if you think C++ (though I think you can store function pointers in a C struct, so this could also be C).
public static void main is Java if it is cased properly - write Main and it's C#. This gets complicated if you take case-insensitive languages like many scripting languages or Pascal into account. The [] attribute syntax in C# on the other hand seems to be rather unique.
You can also try to use the keywords of a language - for example, Option Strict or End Sub are typical for VB and the like, while yield is likely C# and initialization/implementation are Object Pascal / Delphi.
If your application is analyzing the source code anyway, you code try to throw your analysis code at it for every language and if it fails really bad, it was the wrong language :)
My approach would be:
Create a list of strings or regexes (with and without case sensitivity), where each element has assigned a list of languages that the element is an indicator for:
class => C++, C#, Java
interface => C#, Java
implements => Java
[attribute] => C#
procedure => Pascal, Modula
create table / insert / ... => SQL
etc. Then parse the file line-by-line, match each element of the list, and count the hits.
The language with the most hits wins ;)
How about word frequency analysis (with a twist)? Parse the source code and categorise it much like a spam filter does. This way when a code snippet is entered into your app which cannot be 100% identified you can have it show the closest matches which the user can pick from - this can then be fed into your database.
Here's an idea for you. For each of your N languages, find some files in the language, something like 10-20 per language would be enough, each one not too short. Concatenate all files in one language together. Call this lang1.txt. GZip it to lang1.txt.gz. You will have a set of N langX.txt and langX.txt.gz files.
Now, take the file in question and append to each of he langX.txt files, producing langXapp.txt, and corresponding gzipped langXapp.txt.gz. For each X, find the difference between the size of langXapp.gz and langX.gz. The smallest difference will correspond to the language of your file.
Disclaimer: this will work reasonably well only for longer files. Also, it's not very efficient. But on the plus side you don't need to know anything about the language, it's completely automatic. And it can detect natural languages and tell between French or Chinese as well. Just in case you need it :) But the main reason, I just think it's interesting thing to try :)
The most bulletproof but also most work intensive way is to write a parser for each language and just run them in sequence to see which one would accept the code. This won't work well if code has syntax errors though and you most probably would have to deal with code like that, people do make mistakes. One of the fast ways to implement this is to get common compilers for every language you support and just run them and check how many errors they produce.
Heuristics works up to a certain point and the more languages you will support the less help you would get from them. But for first few versions it's a good start, mostly because it's fast to implement and works good enough in most cases. You could check for specific keywords, function/class names in API that is used often, some language constructions etc. Best way is to check how many of these specific stuff a file have for each possible language, this will help with some syntax errors, user defined functions with names like this() in languages that doesn't have such keywords, stuff written in comments and string literals.
Anyhow you most likely would fail sometimes so some mechanism for user to override language choice is still necessary.
I think you never should rely on one single feature, since the absence in a fragment (e.g. somebody systematically using WHILE instead of for) might confuse you.
Also try to stay away from global identifiers like "IMPORT" or "MODULE" or "UNIT" or INITIALIZATION/FINALIZATION, since they might not always exist, be optional in complete sources, and totally absent in fragments.
Dialects and similar languages (e.g. Modula2 and Pascal) are dangerous too.
I would create simple lexers for a bunch of languages that keep track of key tokens, and then simply calculate a key tokens to "other" identifiers ratio. Give each token a weight, since some might be a key indicator to disambiguate between dialects or versions.
Note that this is also a convenient way to allow users to plugin "known" keywords to increase the detection ratio, by e.g. providing identifiers of runtime library routines or types.
Very interesting question, I don't know if it is possible to be able to distinguish languages by code snippets, but here are some ideas:
One simple way is to watch out for single-quotes: In some languages, it is used as character wrapper, whereas in the others it can contain a whole string
A unary asterisk or a unary ampersand operator is a certain indication that it's either of C/C++/C#.
Pascal is the only language (of the ones given) to use two characters for assignments :=. Pascal has many unique keywords, too (begin, sub, end, ...)
The class initialization with a function could be a nice hint for Java.
Functions that do not belong to a class eliminates java (there is no max(), for example)
Naming of basic types (bool vs boolean)
Which reminds me: C++ can look very differently across projects (#define boolean int) So you can never guarantee, that you found the correct language.
If you run the source code through a hashing algorithm and it looks the same, you're most likely analyzing Perl
Indentation is a good hint for Python
You could use functions provided by the languages themselves - like token_get_all() for PHP - or third-party tools - like pychecker for python - to check the syntax
Summing it up: This project would make an interesting research paper (IMHO) and if you want it to work well, be prepared to put a lot of effort into it.
There is no way of making this foolproof, but I would personally start with operators, since they are in most cases "set in stone" (I can't say this holds true to every language since I know only a limited set). This would narrow it down quite considerably, but not nearly enough. For instance "->" is used in many languages (at least C, C++ and Perl).
I would go for something like this:
Create a list of features for each language, these could be operators, commenting style (since most use some sort of easily detectable character or character combination).
For instance:
Some languages have lines that start with the character "#", these include C, C++ and Perl. Do others than the first two use #include and #define in their vocabulary? If you detect this character at the beginning of line, the language is probably one of those. If the character is in the middle of the line, the language is most likely Perl.
Also, if you find the pattern := this would narrow it down to some likely languages.
Etc.
I would have a two-dimensional table with languages and patterns found and after analysis I would simply count which language had most "hits". If I wanted it to be really clever I would give each feature a weight which would signify how likely or unlikely it is that this feature is included in a snippet of this language. For instance if you can find a snippet that starts with /* and ends with */ it is more than likely that this is either C or C++.
The problem with keywords is someone might use it as a normal variable or even inside comments. They can be used as a decider (e.g. the word "class" is much more likely in C++ than C if everything else is equal), but you can't rely on them.
After the analysis I would offer the most likely language as the choice for the user with the rest ordered which would also be selectable. So the user would accept your guess by simply clicking a button, or he can switch it easily.
In answer to 2: if there's a "#!" and the name of an interpreter at the very beginning, then you definitely know which language it is. (Can't believe this wasn't mentioned by anyone else.)
i am kinda confused reading the definition between the two. Can they actually intersect in terms of definition? or am i completely lost? Thanks.
Closures, as the word tends to be used, are just functions (or blocks of code, if you like) that you can treat like a piece of data and pass to other functions, etc. (the "closed" bit is that wherever you eventually call it, it behaves just as it would if you called it where it was originally defined). A monad is (roughly) more like a context in which functions can be chained together sequentially, and controls how data is passed from one function to the next.
They're quite different, although monads will often use closures to capture logic.
Personally I would try to get solid on the definition of closures (essentially a piece of logic which also captures its environment, i.e. local variables etc) before worrying about monads. They can come later :)
There are various questions about closures on Stack Overflow - the best one to help you will depend on what platform you're working on. For instance, there's:
What are closures in .NET?
Function pointers, closures and lambda
Personally I'm only just beginning to "grok" monads (thanks to the book I'm helping out on). One day I'll get round to writing an article about them, when I feel I understand them well enough :)
A "closure" is an object comprising 1) a function, and 2) the values of its free variables where it's constructed.
A "monad" is a class of functions that can be composed in a certain way, i.e. by using associated bind and return higher-order function operators, to produce other functions.
I think monads are a little more complicated than closures because closures are just blocks of code that remember something from the point of their definitions and monads are a construct for "twisting" the usual function composition operation.