I'm writing a jenkinsfile in VS Code and when I use docker.withRegistry("some.registry"){...} I get a brackets do not match error inside of code. It parses fine inside jenkins, but this error inside of code is bugging me a lot. As soon as anything goes between the {} I get the error show up on the closing bracket.
Even copying in directly from the documentation from the Jenkins website gives the same issue.
Any ideas?
Oddly enough I had the same issue when I was using a private registry with a credentials ID, when I switched away from single quotes to double quotes the error went away, you could give that a try?
docker.withRegistry("https://some.registry", "docker-registry-creds") {
def customImage = docker.build("my-image:${env.GIT_COMMIT}")
}
As mentioned by Carl here, this happens when you have the following 2 characters, in this particular order, in a single quoted string:
'/*'
So strings like the following will trigger the error:
'**/*.xml'
'/some/path/to/random/files/*.py'
Just use double quote in those strings, and all the errors will go away:
"**/*.xml"
"/some/path/to/random/files/*.py"
I noticed this also occurs when using a parenthesis in single quotes. Again fixed by putting these in double quotes.
e.g.:
def something= somethingelse.tokenize('(')
can be replaced by
def something= somethingelse.tokenize("(")
I am attempting to send a file from IFS to an outq on our AS/400 system. Whenever I do, I get exactly what I send, as well as a line of "#" symbols of varying lengths appended to the end.
Here's the command I'm using:
qsh cmd('cat -c /path/test.txt | Rfile -wbQ -c "ovrprtf file(qprint)
outq(*LIBL/ABCD) devtype(*USERASCII) rplunprt(*no) splfname(test) hold(*no)"
qprint')
The contents of test.txt is just Hello World!
The output I get when I send the command is
Hello World!####################################################################
I have not found any posts online about a similar problem, and have tried changing values and looking for additional switches to get it to work. Nothing I'm doing seems to fix the issue.
Is there a command or switch that I am missing, or is something I have in there already causing this?
EDIT:
I found this documentation which is the first time I've seen this issue mentioned, but it's not very helpful:
“Messages for a Take Action command might consist of a long string of "at" symbols (#) in a pop-up message. (The Reflex automation Take Action command, which is configured in situations, does not have this problem.) A resolution for this problem is under construction. This problem might be resolved by the time of the product release. If you see this problem, contact IBM Software Support.”
The only differences are: 1) this is not a pop-up message, it's printed. 2) I don't believe we use Tivoli Monitoring, although I could be wrong.
Assuming we do use Tivoli Monitoring, what would the solution be? There's no additional documentation past that, and I am not a system administrator, so I can't really make the call to IBM Software Support myself. And assuming we DON'T use it, what else could cause this issue?
I get different results, yet similar. I created a test.txt with Windows Explorer, put in Hello, world!, saved it and tried the script. I got gibberish for the 'Hello, world!' and then the line of # symbols.
My system is 7.3 TR5, CCSID 37 (US English) and my IFS file is CCSID 1252 (Windows English). Results did not change if I used a stream file of CCSID 819 (US ASCII).
I didn't have any luck modifying Rfile switches.
I found that removing devtype(*userascii) produced printed output in plain English without the # symbols. Do you really need *USERASCII? I would think that would be more for a pre-formatted 'print-ready' file like Postscript or the like.
EDIT: some more things to try
I don't understand why *USERASCII is adding those # symbols; it looks like a translation issue.
I tried this and still got the extra ###... You might have to play with the TOCCSID() parameter. Although a failure, it did give me an idea: what if those # symbols are EBCDIC spaces being sent as-is to the *USERASCII print stream? All we'd need is a way to send only the number of bytes in the stream file, without any padding.
CRTPF FILE(QTEMP/PRTSTMF) RCDLEN(132)
CPY OBJ('/path/test.txt') TOOBJ('/qsys.lib/qtemp.lib/prtstmf.file/prtstmf.mbr') replace(*yes)
ovrprtf file(qprint) outq(*LIBL/prt3812) devtype(*USERASCII) rplunprt(*no) splfname(test) hold(*no)
cpyf prtstmf qprint
The data in QTEMP/PRTSTMF is in ASCII; DSPPFM shows that much. It also shows a bunch of spaces: after all, it is a fixed length file. My next step was to write an RPG program to read the stream file and print it, but Scott Klement already did that: http://www.scottklement.com/PrtStmf.zip
This works on my system:
ovrprtf file(qsysprt) outq(*LIBL/abcd) devtype(*USERASCII) rplunprt(*no) splfname(test) hold(*no)
prtstmf stmf('/path/test.txt') outq(abcd)
I need help fixing a Python script, but know ABSOLUTELY NOTHING about Python (though I am an experienced programmer so I get the jargon.)
I have this script that is trying to write output to a generated path, but when I run it, it gives me an error saying something about "E:\Program", and when I check, sure enough, it creates a folder named "Program" in the root of my E: drive. I'm CERTAIN it is trying to write to "E:\Program Files" but the space is terminating the command.
I did find where "path" is assigned:
path = tkm.path_archuncomp + bs.path + bs.name + '.ext'
How would I enclose that path in quotes that are assigned to the variable?
Inserting the quotes character appears to be the same as languages like C. Simply use "slash" notion:
path = \" + some_variable + \"
Unfortunately for me, repairing the script is more complicated than that, and doing so only created errors, so I can't confirm that was done properly. :(
I am trying to make a simple UDP packet decoder.
packet_decoder(Packet)->
<<Opts:8,MobIdLength:8,MobId:64,MobIdType:8,MgeType:8,SeqNum:16,Rest/binary>> = Packet,
io:format("Options:~p~n",Opts),
io:format("MobIdLength:~p~n",MobIdLength),
io:format("MobId:~p~n",MobId),
io:format("MobIdType:~p~n",MobIdType),
io:format("MgeType:~p~n",MgeType),
io:format("SeqNum:~p~n",SeqNum).
Packet is passed by a receive loop:
rcv_loop(Socket) ->
inet:setopts(Socket, [{active, once}, binary]),
io:format("rcvr started:~n"),
receive
{udp, Socket, Host, Port, Bin} ->
packet_decoder(Bin),
rcv_loop(Socket)
end.
I keep getting(following error edited 9/7/12 9:30 EST):
** exception error: no match of right hand side value
<<131,8,53,134,150,4,149,0,80,15,1,2,1,2,0,16,80,71,115,
52,80,71,115,53,24,63,227,197,211,...>>
in function udp_server:packet_decoder/1
called as udp_server:packet_decoder(<<131,8,53,134,150,4,149,0,80,15,
1,2,1,2,0,16,80,71,115,52,80,71,
115,53,24,63,227,197,...>>)
in call from udp_server:rcv_loop/1
in call from udp_server:init/0
If I create the same variable in the Erlang shell as a binary, i.e.
Packet = <<131,8,53,134,150,4,149,0,80,15,1,2,1,2,0,16,80,71,115,52,80,71,115,53,24,63,227,197,211,228,89,72,0,0,0,0,0,0,0,16,0,5,5,32,1,4,255,159,15,18,28,0,34,62,2,0,0,0,0,0,0,0,47,67>>.
<<Opts:8,MobIdLength:8,MobId:64,MobIdType:8,MgeType:8,SeqNum:16,Rest/binary>> = Packet.
It works just fine. Is there some subtlety in passing this to a function that I am missing? I have tried what I think is everything(except the right way). I tried setting the type and size. I also just tried
<<Rest/binary>> = Packet.
To no avail. Any help much appreciated.
The error you are getting when you run your code does not match your code. The error you are getting:
** exception error: no match of right hand side value ...
is a badmatch error and comes from an explicit = match where the pattern does not match the value from the RHS. There is no = in the code for rcv_loop/1. This implies that the loop you are running is not this code. So there are some questions to be asked:
When you have recompiled the module containing rcv_loop/1 have you restarted the loop so you run the new code? This is not done automagically.
Are you sure you are loading/running the code you think you are? I know this question sounds stupid but it is very easy, and not uncommon, to work on one version of the code and load another. You need to get the paths right.
The other things about mentioned about your code would not give this error. The calls to io:format/2 are wrong but would result in errors when you make the actual calls to io:format/2. Using the variable Socket as you do is not an error, it just means that you only want to receive UDP packets from just that socket.
EDIT : the first part of my answer was completely wrong so in order to not mislead, I deleted it.
Like spotted Alexey Kachayev io:format takes as second parameter a list, so :
packet_decoder(Packet)->
<<Opts:8,MobIdLength:8,MobId:64,MobIdType:8,MgeType:8,SeqNum:16,Rest/binary>> = Packet,
io:format("Options:~p~n",[Opts]),
io:format("MobIdLength:~p~n",[MobIdLength]),
io:format("MobId:~p~n",[MobId]),
io:format("MobIdType:~p~n",[MobIdType]),
io:format("MgeType:~p~n",[MgeType]),
io:format("SeqNum:~p~n",[SeqNum]).
I figured it out(kinda). I had been working on this in erlide in eclipse which had worked fine for all of the other parts of the. I tried compiling it from the erl shell and it worked fine. There must be some minor difference in the way eclipse is representing the source or the way it invokes the erlang compiler and shell. I will take it up with erlide.org. Thanks for the help!
I deployed my symfony 1.4 project from my local machine (Windows 7) to my test server (Linux Ubuntu Server).
Whenever I open this project through my browser (IE, FF...) I get an Error 500 which is most certainly caused due to an error which I get from the log/frontend_staging:
"symfony [err] {InvalidArgumentException} Unable to load "I18nHelper.php" helper in: SF_ROOT_DIR/apps/frontend/lib/helper, SF_ROOT_DIR/lib/helper, SF_ROOT_DIR/lib/vendor/symfony/lib/helper."
The File I18NHelper.php is located in SF_ROOT_DIR/lib/vendor/symfony/lib/helper, so I don't see a problem there. I already played with the naming, though some people mentioned they had trouble with the uppercase N in the Helpers name on Unix systems, but this didn´t solve my problem at all.
It's a very nasty little thing:
Use <?php use_helper('I18N'); ?> instead of <?php use_helper('I18n'); ?> (Mind the upper case of the last 'n').
Linux is case-sensitive, unlike Windows.
You have misspelled the helper's name The last "N" should be uppercase.
In templates it should look like:
<?php use_helper('I18N'); ?>
If you are modifying the settings.yml it should look like:
standard_helpers: [Partial, Cache, I18N]
You have to keep in mind that symfony YAML configuration files are cached as php files. If you don't clean your cache, your changes won't be applied (depending on the environment of course). Try using:
php symfony cc
from command line, it should fix it.