is there a way to rotate the "Demo 1", "Demo2" and "Demo 3" headlines 90° in the following LaText table?
\documentclass[a4paper,twoside,10pt]{report}
\begin{document}
\begin{tabular}{|l|l|l|l|}
\hline
& Demo1 & Demo2 & Demo3 \\
\hline
Person 1 & x & & \\
\hline
Person 2 & x & & x \\
\hline
Person 3 & x & x & \\
\hline
Person 4 & & x & x \\
\hline
\end{tabular}
\end{document}
Thanks
Yes. As Dr. Andrew J. Page wrote on his blog,
Put this at the top of your code:
\usepackage{rotating}
Simply to create a table with rotated column text use this code:
\begin{tabular}{|r|r|}\hline
\begin{sideways}Paper\end{sideways} &\begin{sideways}Static\end{sideways} \\
\hline
HAR1994j & Journal \\
SWRT1996c & Conference \\
\hline
\end{tabular}
Related
How can I align this table. It does not algin column two and three at center.
I am using following code:
\begin{table}[htbp]
\caption{Comparison with the hybrid architecture}
\label{tab:comparison}
\begin{center}
\begin{tabular}{|l|c|c|}
\hline
\multicolumn{1}{|c|}{} & \multicolumn{2}{c|}{\textit{Average Episode Reward for 10 Runs (deviation)}} \\ \cline{2-3}
\multicolumn{1}{|c|}{} & \multicolumn{2}{c|}{\textit{Disturbance Magnitude}} \\
\cline{2-3}
\multicolumn{1}{|c|}{\multirow{-3}{*}{\textit{Architecture}}}
& 65\% & 70\% \\ \hline
PID & -17.71 & -23.54 \\
CoL-DRL & -2.58 & -12.25 \\
\rowcolor[HTML]{9AFF99} CoL-DRPRL & -1.85 & -6.25 \\ \hline
\end{tabular}
\end{center}
\end{table}
so i started working with latex and i'm trying to fit a table with statistical content into another table for better alignment.
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage{graphicx,dashrule}
\usepackage{tabularx}
\usepackage{xcolor}
\usepackage[a4paper,left=2cm,right=2cm,top=1cm,bottom=1cm]{geometry}
% Document metadata
\title{Statistische Auswertung}
\author{Automatisch Generiert}
\date{2023-02-09 16:24:04}
\begin{document}
% Dokumententitel und Datum generieren
\maketitle
\begin{tabularx}{\textwidth}{|X|X|}
{\begin{tabularx}{\linewidth}{|X|X|}
\hline
age & --- \\
count & 343.0 \\
mean & 60.8 \\
std & 12.1 \\
min & 28.0 \\
25\% & 53.0 \\
50\% & 60.0 \\
75\% & 70.0 \\
max & 89.0 \\
\hline
\end{tabularx}} & \frame{\includegraphics[width=\linewidth]{age.png}} \\
\hline
{\begin{tabularx}{\linewidth}{|X|X|}
\hline
status-fu & --- \\
count & 356 \\
unique & 2 \\
top & False \\
freq & 297 \\
\hline
\end{tabularx}} & \frame{\includegraphics[width=\linewidth]{status_fu.png}} \\
\hline
\end{tabularx}
\end{document}
The Output lools like this:
I want the Sub-tables on the left to be center top aligned with the Images on the right.
Any help???
Cheers!
When I insert my table into latex I get an overfull /hbox error and cannot figure out how to change the width without changing the structure of my table. The code of my table follows as such:
\begin{center}
\begin{tabular}{||c c c||}
\hline
Function() & Computational Cost (Gas)& USD Equivalent \\ [0.5ex]
\hline\hline
Total Deployment & 8342204 & 1.195559526 \\
\hline
Security Registration & 3849155 & 0.5516400614 \\
\hline
\textit{MintSecurity} & 76293 & 0.01093389983 \\
\hline
\textit{TransferFrom} & 55146 & 0.007903226248 \\
\hline
\textit{Swap} & 89343 & 0.0128041552 \\
\hline
\textit{AddLiquidity} & 185368 & 0.02656593847 \\
\hline
\textit{Remove Liquidity} & 67137 & 0.009621711468 \\ [1ex]
\hline
\end{tabular}
\end{center}
In the template you are using, tables are set in a smaller font size, so the problem is solved automatically if you use a table environment instead of center.
In addition, you can use the tabularray package, so the table will automatically match the text width:
\documentclass[conference]{IEEEtran}
\usepackage{tabularray}
\usepackage{lipsum}
\begin{document}
\lipsum[2]
\begin{table}[htbp]
\begin{tblr}{||c X[c] c||}
\hline
Function() & Computational Cost (Gas)& USD Equivalent \\
\hline\hline
Total Deployment & 8342204 & 1.195559526 \\
\hline
Security Registration & 3849155 & 0.5516400614 \\
\hline
\textit{MintSecurity} & 76293 & 0.01093389983 \\
\hline
\textit{TransferFrom} & 55146 & 0.007903226248 \\
\hline
\textit{Swap} & 89343 & 0.0128041552 \\
\hline
\textit{AddLiquidity} & 185368 & 0.02656593847 \\
\hline
\textit{Remove Liquidity} & 67137 & 0.009621711468 \\
\hline
\end{tblr}%
\end{table}
\lipsum[2]
\end{document}
The verticle line in the third column has 2 gaps. How do I do I make it look full?
Here's the code:
\begin{table}[H]
\centering
\caption{Enzymatic cocktails and the respective tested concentrations in \%(v/v) used in Combined Hydrolysis}
\label{enzymatic cocktails}
\begin{tabular}{#{}ccc#{}}
\toprule
\textbf{Cocktail} & \textbf{Enzymes} & \textbf{Concentration \%(v/v)} \\ \midrule
\multirow{2}{*}{A} & \multicolumn{1}{c|}{Cellulase} & \multirow{8}{*}{\begin{tabular}[c]{#{}c#{}}0.25\\ 0.50\\ 1.00\end{tabular}} \\
& \multicolumn{1}{c|}{$\boldsymbol{\beta}$-glucosidase} & \\ \cmidrule(r){1-2}
\multirow{3}{*}{B} & \multicolumn{1}{c|}{Cellulase} & \\
& \multicolumn{1}{c|}{$\boldsymbol{\beta}$-glucosidase} & \\
& \multicolumn{1}{c|}{xylanase} & \\ \cmidrule(r){1-2}
\multirow{3}{*}{C} & \multicolumn{1}{c|}{Cellulase} & \\
& \multicolumn{1}{c|}{$\boldsymbol{\beta}$-glucosidase} & \\
& \multicolumn{1}{c|}{$\boldsymbol{\beta}$-glucanase and xylanase} & \\ \bottomrule
\end{tabular}
\end{table}
Vertical lines like in c| and horizontal lines such as toprule, bottomrule, midrule, cmidrule from the package booktabs do not match.
\documentclass{article}
\usepackage{multirow}
\begin{document}
\begin{table}%[H]
\centering
\caption{Enzymatic cocktails and the respective tested concentrations in \%(v/v) used in Combined Hydrolysis}
\label{enzymatic_cocktails}
\begin{tabular}{#{}ccc#{}}
\hline
\textbf{Cocktail} & \textbf{Enzymes} & \textbf{Concentration \%(v/v)}\\
\hline
\multirow{2}{*}{A} & \multicolumn{1}{c|}{Cellulase} & %
\multirow{8}{*}{\begin{tabular}[c]{#{}c#{}}0.25\\ 0.50\\ 1.00\end{tabular}}\\
& \multicolumn{1}{c|}{$\mathbb{\beta}$-glucosidase} & \\
\cline{1-2}
\multirow{3}{*}{B} & \multicolumn{1}{c|}{Cellulase} & \\
& \multicolumn{1}{c|}{$\boldsymbol{\beta}$-glucosidase} & \\
& \multicolumn{1}{c|}{xylanase} & \\
\cline{1-2}
\multirow{3}{*}{C} & \multicolumn{1}{c|}{Cellulase} & \\
& \multicolumn{1}{c|}{$\mathbb{\beta}$-glucosidase} & \\
& \multicolumn{1}{c|}{$\mathbb{\beta}$-glucanase and xylanase} & \\
\hline
\end{tabular}
\end{table}
\end{document}
So I went back to hlines in my code. Better would be to use the above mentioned package booktabs and avoid vertical lines instead.
I am making a table and I am not able to make vertical lines to appear. I followed a few examples and they are still not appearing.
\begin{table}[h!]
\centering
\begin{tabular}{||c c c c||}
\hline
\multicolumn{4}{|c|}{Telescope Data} \\
\hline
Channels & \makecell{Beam Size\\ (arcsec)} & \makecell{Noise \\ (mJy/beam)} & Position of Peak Flux \\ [0.5ex]
\hline
1-10 & \makecell{\textbf{min:} 1.42 \\ \textbf{max:} 1.95} & 4.9928 & \makecell{\textbf{peak(x):} 15 \\ \textbf{peak(y):} -13.5 \\ \textbf{peak(flux, max):} 0.002846} \\ [3ex]
\hline
52-61 & \makecell{\textbf{min:} 1.423 \\ \textbf{max:} 1.95} & 0.0018912 & \makecell{\textbf{peak(x):} -0.25 \\ \textbf{peak(y):} 0 \\ \textbf{peak(flux, max):} 0.029341} \\ [3ex]
\hline
103-112 & \makecell{\textbf{min:} 1.427 \\ \textbf{max:} 1.956} & 0.000802855 & \makecell{\textbf{peak(x):} -16 \\ \textbf{peak(y):} 0 \\ \textbf{peak(flux, max):} 0.00241892} \\ [3ex]
\hline
\end{tabular}
\end{table}