I'd like to use LaTeX's \tableofcontents command (or some equivalent) to automatically generate a table of contents, but I'd also like to add a sentence or two to each line in the table of contents that describes what the referenced section is about. How can I do this?
The tocloft package and its \cftchapterprecistoc command solved my problem.
Try
\addcontentsline{toc}{section}{sample text}
Follwoing Oliver and simon's advice:
You could redefine the sectioning commands to take a second (possibly optional) argument, and use that to build your argument to \addtocontentsline, and then involk the cooresponding section* command.
I expect you can brute force and ignorance something using addcontentsline.
eg:
\addcontentsline{toc}{section}{text}
however, this will conflict with automagically generated lines if you don't use the starred versions of sections it refers to.
Anything more clean will require messing about with the relevant macros....unless I'm missing something.
I would change the {section} part to {subsection}.
\addcontentsline{toc}{subsection}{sample text}
Related
I would like to globally prevent LaTeX from hyphenating 'Objective-C'. I am aware of the \hyphenation command, but I don't see how I can make use of it. If I pass 'Objective-C' to this command, the dash will be treated as a hint to hyphenate the word there.
One solution I found is wrapping Objective-C into an mbox each time I use it. However, the document I am writing contains this name a lot, and wrapping it into an mbox each time is ugly (as is defining a command and using this over and over again in the source code).
Why is defining a new command ugly? It's how \LaTeX\ defines itself.
\def\ObjectiveC{\mbox{Objective-C}}
Use \nobreakdash. That's what LyX produces when I insert a nonbreakingdash and convert it to tex.
As suggested here, you could define a command like this:
\newcommand\dash{\nobreakdash-\hspace{0pt}}
and use it like this
Consider the $n$\dash dimensional manifold ...
Also, you could use the babel package and use "~ as a protected hyphen. I'm not sure if using babel is advisable when writing in english, though.
I'm producing a set of documents in LaTeX, and I would like to provide a single, global bibliography page for the whole set. This is because each document is page-limited: I don't want to take up space with references at the bottom of each one.
This means in each case, I would like to cite in the text, but not produce a reference at the end. I am using bibtex/natbib to handle the referencing.
Simplest example:
\documentclass[]{article}
\bibliographystyle{/usr/share/texmf/bibtex/bst/natbib/plainnat.bst}
\usepackage{natbib}
\begin{document}
In \citet*{MEF2010} I described the method.
\bibliography{bibliography.bib}
\end{document}
How can I do this? Essentially I just want it to cite correctly:
In Bloggs, Blagg and Blog (2010) I described the method.
But not add a references section at the end. Any ideas?
Thanks,
David
Instead of using \bibliography{bibliography.bib} you can try \nobibliography{bibliography.bib}.
You still need to enter the path so it can make the cross-references.
It happens due to missing packages. If you want to resolve the problem then enable the automatic installation packet. After that,First, you run the BibTeX file and generate the Pdf file (instead of pdfLatex file) and then pdfLatex to Pdf
I'm new to latex, but it seems you can temporarily redefine some commands? The problem I have is that normally the citation is (SMITH, 2000). But at times, I'd like to have Smith (2000) instead. Anyway I can temporarily redefine it, then use the standard version again after that "block" of code?
Enclose the local definition in braces ({}).
\newcommand\foo{FOO!}
\foo
{\renewcommand\foo{BAR?}\foo\foo}
\foo
This will generate something like:
FOO!BAR?BAR? FOO!
This can be done inside macro definitions, too - just make sure you add the extra braces:
\newcommand\newfoo{{\renewcommand\foo{BAR?}\foo}}
Hope this helps.
You should already have \citep and \citet commands that should do what you want, there's no reason to redefine the macros yourself.
I tried redefining the \FancyVerbLine to have a \large, but that didn't help. Is there another way to do this?
That should do the trick. How exactly does your \FancyVerbLine look like? Notice that it’s not enough to put the formatting in – you also need to include the counter command:
\renewcommand\theFancyVerbLine{\large\arabic{FancyVerbLine}}
This should work.
When a URL is over a line and goes onto a second line, the hyperlink only uses the first line. Is there a way to get around this and yet still have the URL on multiple lines?
You should use the url package:
\usepackage{url}
...
\url{http://long.url.com/... .../stuff}
and it will break it for you at an appropriate place.
I suggest using package:
\usepackage{xurl}
This works fine for me on overleaf.
Example:
\url{https://www.tudelft.nl/ewi/over-de-faculteit/afdelingen/intelligent-systems/pattern-recognition-bioinformatics/pattern-recognition-laboratory/data-and-software/dd-tools/}
At the preamble, just put \usepackage{breakurl} somewhere after \usepackage{hyperref}. The \burl command is defined and, by default, the package also turns the \url command into a synonym of \burl.
Do it the following way. You are good to go!
\begin{document}
\sloppy
For me only this worked:
\PassOptionsToPackage{hyphens}{url}
\usepackage{hyperref}
and with this code to add line breaks after every normal alphabetic character and with *-~'":
\expandafter\def\expandafter\UrlBreaks\expandafter{\UrlBreaks% save the current one
\do\a\do\b\do\c\do\d\do\e\do\f\do\g\do\h\do\i\do\j%
\do\k\do\l\do\m\do\n\do\o\do\p\do\q\do\r\do\s\do\t%
\do\u\do\v\do\w\do\x\do\y\do\z\do\A\do\B\do\C\do\D%
\do\E\do\F\do\G\do\H\do\I\do\J\do\K\do\L\do\M\do\N%
\do\O\do\P\do\Q\do\R\do\S\do\T\do\U\do\V\do\W\do\X%
\do\Y\do\Z\do\*\do\-\do\~\do\'\do\"\do\-}%
answer complited from this site:
https://tex.stackexchange.com/questions/3033/forcing-linebreaks-in-url/10401
What packages (hyperref,url) and drivers (pdftex, dvips, etc.) are you using? Are you using the breaklinks option to hyperref?
According to the TeX FAQ you might want to try the breakurl package, though it appears you may simply be out of luck in some cases.
What worked best for me (with pdflatex) was
\usepackage[pdftex]{hyperref}
and then just \url{http://stackoverflow.com/} to create URLs. It only broke URLs at . and /, which was okay for my document. Importantly, other approaches I tried created PDFs where only the first line of the URL was a clickable link, and the destination URL was truncated to this portion, which is pretty confusing and bad.
Long URLs that contain underscores (_) in path segments will not be broken when using \PassOptionsToPackage{hyphens}{url}\usepackage{hyperref}. However, I found that I could solve this problem by manually breaking lines in the displayed label using \\\\, like this:
\href{http://www.researchgate.net/profile/Nick\_Brooks2/publication/220012411\_Cultural\_responses\_to\_aridity\_in\_the\_Middle\_Holocene\_and\_increased\_social\_complexity/links/0922b4f398ad68bc96000000.pdf}{http://www.researchgate.net/profile/Nick\_Brooks2/publication/220012411\_\\Cultural\_responses\_to\_aridity\_in\_the\_Middle\_Holocene\_and\_increased\_social\_\\complexity/links/0922b4f398ad68bc96000000.pdf}
This results in URLs that are a bit prettier (IMO) than the use of \usepackage{breakurl} and \burl, as suggested by Debajyoti Mondal, and allows you to display the full URL if you wish.
There is a simple answer. Use \usepackage[hidelinks]{hyperref} before \begin{document}