I need to create a photo gallery for a website running IIS 4.0 or IIS 5.0 (im not sure which). It needs to display a low resolution version of the gallery to anyone, and it must show both the low and high resolution images for "priviledged" users. So I need access priviledges, photo albums and once the site is complete, the person I am doing this for needs to be able to upload their own images to the gallery. It also needs to have a minimal interface as it needs to be integrated into an existing website.
So I need some advice on this with the direction I should approach it.
Does anyone know if their is a customisable gallery out there that can do something like this, such as Coppermine or Jgallery or something. The alternative is to use a web framework like Ruby on Rails, CodeIgniter or Sproutcore (each which require learning a new language). The framework would be more work, but the existing galleries may not be customisable enough. The important bit is the user privileges in an admin panel.
I am relatively new to "web programming", although not new to normal/games programming. I have a few years experience with C/C++ OpenGL and Java. I have also read up on MVC etc, and did hello world with sproutcore, so I kinda get the idea. Although learning a framework is a much heavier investment.
What are your thoughts?
If you don't want to re-invent the wheel you could use Gallery2 (requirements here). It runs on IIS -- you'd just need PHP and a database. It's very configurable (including user accounts), has lots of plugins, and its open source if that's not enough. Also, the development and support communities are large and active.
you could always go the route of Dotnetnuke and then use Ventrian's Simple Gallery module (http://www.ventrian.com/Products/Modules/SimpleGallery/Demo.aspx)
Using DNN offers a ton of functionality, including the security you need, and it would save you from doing any web development.
If you are a bit more adventurous, try Smaltalk based Aida/Web and specially Aida/Scribo CMS (currently still in beta), which include Gallery so called scriblet as well. Scribo scriblets are otherwise web components which you can include directly into a text. You therefore add a gallery directly into a surronding text. See for instance a presentation as a Gallery for example.
I would recommend my own but... If it weren't for the low/high resolution thing with permissions I think it would fit the rest of your needs. I'm going to leave a link just in case you want to take a look at it:
nzFotolog
It's also open-source (although the license is not the best) and you can change it at will if you want. The code itself is clean and self-explanatory. The downside is that I haven't developed it for some time now :(
Having faced a similar dilemma myself I have to say that I found Gallery2 and Coppermine both far too all-encompassing and difficult to customise to the degree I would have wished. I ended up rolling my own using straight, procedural PHP with various bits of jQuery for the GUI fancy bits. At the same time I was able to bake in some e-commerce and data gathering for my wedding photography clients, ending up with something which exactly matched my needs. Certainly, the gallery aspects of this project were, for a complete programming (although not HTML) neophyte, the least challenging - it's exactly the sort of thing PHP is made for.
I'm now taking my first faltering steps with CodeIgniter for my next project (photoblogging software) and I can already see that the framework would make a gallery project very quick, simple and secure.
Flickr.com and their API may be suitable from what you described.
http://www.flickr.com/services/api/
Related
I've been trying to work on a proof of concept (POC) where I can embed a UE4 project into an existing application (in my case NativeScript) but this could just as easily apply to Kotlin or ReactNative.
In the proof of concept I've been able to run the projects on my iPhone launching from UE4 pretty easily by following the Blueprint and C++ tutorials for the FPS. However the next stage of my POC requires that I embed the FPS into an existing NativeScript application, this application will manage the root menu, chat, and store aspects of the platform in the POC.
The struggle I'm running into is that I cannot find how to interact with the xcode project generated from the blueprint tutorial and the C++ tutorial generates a xcode project that i'm unsure where the actual root is that I need to wrap.
Has anyone seen a project doing this before and if so are there any blogs or guidance that you can point me to? I've been Googling and looking around for a couple weeks and have hit a dead end. I found a feedback post here from April of 2020, that was referring to a post in January 2020 that talked about how Unity has a way to embed into other applications additionally a question from 2014 here. But other than that it's a dead end.
A slightly different approach
Disclaimer: I'm not an UE4 developer. Guilty as charged for seeing an unanswered bounty too big to ignore. So I started thinking and looking - and I've found something that could be bent to your needs. Enters pixelstreaming.
Pixelstreaming is a beta feature that is primarily designed to allow for embedding the game into a browser. This opens a two way communication between a server where the GPU heavy computations happen and a browser where the player can interact with the content - the mouseclick & other events are sent back to the server. Apparently it allows some additional neat stuff, however that is not relevant for the question at hand.
Since you want to embedd the Unreal application into your NativeScript tool(menu of some kind if I understood correctly), you could make your application a from two separate parts:
One part would run the server.
The second part would handle the overlay via the pixelstreaming.
This reduces the issue of embedding the UE4 into an application to the(possibly easier) issue of embedding a browser into your application. (Or if your application is browser based - voila, problem solved.)
If you don't want to handle the remote communication, just have the server-side run on the localhost.(With the nice sideeffect of saving bandwidth.)
Alternatively, if you are feeling adventurous, you could go and write your own WebRTC support on the application side to bypass the need for the browser alltogether. It might not be worth the effort though.
Side note: The first of the links you provided is a feature request which hints at the unfortunate fact that UE4 doesn't support embedding. This is further enforced by the fact that one of the people there says somethig along the lines "Unity can to this, it would be nice if UE4 could as well."
Yet a different approach:
You could embedd and use a virtual display to insert the UE4 part into your controller - you would be basically tricking UE4 into thinking that the desired display device is a canvas inside your application.
This thread suggests a similar approach:
In general, the way to connect two libraries like this would be through a platform dependent window handle, e.g. a HWND under Windows. Check the UE api if you find any way to bind the render target to a HWND. Then you could create a wxWindow in wxWidgets and tell UE to render into that window. That would be a first step.
I'm not sure if anything I've listed will be of much help but hey, at least I tried :-). Good luck with your game.
At the same time, the author suggests to:
Reverse the problem:
Using the UE4 slate framework and online subsystem. You would use the former to create the menus you need directly in the UE4 and then use the latter to link to the logic you want to have outside of the UE4. However that is not what you asked for so I'm listing it only for the completeness sake.
My iOS app is a mobile version of a management program I had developed for a company as a desktop application. So its main tasks are saving data in a database and retrieve them when needed with the option to edit them. So I guess that the GUI is mainly composed by forms to fill in and tables to show data. So I am asking you if you could link me some tutorials or give me some tips on how to realize them in a nice way but not too complex. I'd rather avoid simply creating a blank view controller and inserting labels and text fields without a minimum of criterion. I am very new to iOS and XCode and, as I have not too much time, I am asking directly your opinion instead of spending hours in looking for tutorials.
UPDATE!
I mean that I would like to get something similar, for a mobile iOS device, to the following screenshots (from the desktop application I mentioned above)
Seems that you need a grid control to do it.
You can develop your own, or use existing library.
I have very good work experience with Infragistic http://www.infragistics.com/products/ios/grids/grid-view-layouts, but maybe DataForm from Telerik will be better in your case http://www.telerik.com/ios-ui/dataform
I've created a core mechanic of my game and want to create a level editor for it. my game is not a tile-based one, so my needs are quite specific. Game is written using Swift and Cocos2d-swift, but i dont think i can figure something out with Sprite Builder.
What you can advice me? Can I for example create a level editor with c# and then use it from swift code?
And what data structure is the best?
I mean is it possible to serialize classes on desktop Swift application and then just load them on ios from file or I'll need to use json/xml?
It might be an old question but I ended up with using a .Net powered solution. I choosed as It has all controls that you need for creating a rich user interface and also, it has a lot of built-in and third party solutions for serializing levels in any way you want. And the c# syntax is very similar to the Swift one.
The only problem is that you might run windows to work with it.
My game in development also needed a non-tile level editor. A few months ago I took some time to make my choice.
Since my project still uses cocos2d 2.x, I don't use the whole new 3.x and SB system. After some investigation I found out that it would be too time consuming to adjust my whole project to the new system and adjusting SB to my needs, mainly because my game engine has been in development for quite some time and is close to finished. Further more, I couldn't find the right information to actually make it work for my game (it needed some odd level architecture I guess).
Finally, I didn't find any other good alternative so I decided to create my own level editor. In this way I had full control and I knew exactly how everything worked which was a huge advantage for me.
Right now my level editor has been finished for some time and works like a charm. I still think in my situation I made the right choice. Also because I learned a lot this way, building everything from the ground up. Having said that, for my next game I will probably go with the main stream and use SB from the start. Also for you I advice you to still check out SB and take some time for it before making an alternative choice...
I'll explain how I did mine. Disclaimer: it has some oddity's which only worked in my situation, but hopefully it helps a bit with choosing your own way to go, that's the goal I'm aiming at...
I used:
max/msp
Although it's developed to make music and audio based software, I used max/msp because it's very easy and fast for creating visual and interface based software as well.
More importend: I happened to be very experienced in it, which shortened the development time tremendously.
javascript
Inside the max/msp patch is a javascript file running. This file is like a bridge between the interface and the visual representation of the level being edited, and the database in which the level
is saved in. 70% of the editor development went into this file I think.
sqlite
All the data is written in a sqlite database. Again, this has been mainly the choice because it saved a great amount of development time in my case. I could have used xml files for instance, but my game was already using a sqlite database and because of this I felt comfortable using it, I had no experience in xml. Also all the code was already in place for a big part, which speeded up the whole proces a lot.
I'm very happy with the end result. It does everything I need, it's easy too use and since I made everything myself from the ground up I know exactly how every works.
Good luck with you choices.
I have an idea to develop a website that would help people to model 3D worlds, use 3D models and so on.
For example, based on my reseach, I could use Unity Framework to create this type of application for PC/MAC.
I am wondering if there are similar frameworks available for pure WEB?
This is my first time looking into this and I do not have any expertize in this topic. Please advise if you have any opinions or expertise in it.
Unity indeed has support for 3d on web, but it requires from user that it has installed Unity player. Users might not like that.
However, with webGL, you would have absolute control over the look and capabilities of your product, users wouldn't have to install anything new, it would all be pure web and only IE users would be damaged, because IE still doesn't have full support for webGL.
To develop with webGL you can do it from scratch, or you could use some of the existing libraries/3D engines that would speed up your work and give results much faster.
Here's a list of webGL engines: http://ffwd.typepad.com/blog/2011/04/webgl-what-flavor-is-your-engine.html, it seems that most used are Three.js, Scene.js and there is also Goo Engine (http://www.gooengine.com/).
Hope this helps.
Check out 3DTin, it does seem to deliver a part of what you want to build, using WebGL:
http://www.3dtin.com/
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
We don’t allow questions seeking recommendations for books, tools, software libraries, and more. You can edit the question so it can be answered with facts and citations.
Closed 2 years ago.
Improve this question
What do you use to capture webpages, diagram/pictures and code snippets for later reference?
Evernote http://www.evernote.com and delicious http://www.delicious.com
Evernote
Notepad2's clipboard feature (Notepad2.exe /c as a link in Launchy)
Windows Clippings or PrintKey
Firefox extension Page Saver
Delicious
Microsoft OneNote.
I just have an emacs instance running on my home machine, under screen. Whereever I am (and have network) I can connect to it remotely. I stick all useful urls, birthday present ideas, future dates, code snippets, ideas for docs etcetc in there.
I rarely have doodles/diagrams I need to capture, I tend to draw them in ascii in my file if needed.
I must admit I'm a bit stuck if I have no network/wifi somewhere, but that's rarely the case.
I find google notebook is very good for drive by code snippeting and google bookmarks especially as when used with the google toolbar, for web pages.
The benefit of these tools are that they are available from any pc on the web, though a good use of semantic organisation using labels is recommended.
Here's my response to a similar question:
The combination of OneNote with a tablet PC is awesome! I was a bit of a skeptic at first. I used the trial version and then forgot about it. A year later I had an unruly collection of files, project related emails, notebooks and scraps of paper all scattered throughout my life. I went back to OneNote and all my problems went away. Some highlights:
Everything is searchable. The character recognition is good enough that my chicken-scratch meeting notes can be searched. Text within images is searchable.
OneNote syncs with Outlook so finding meeting notes is a breeze.
I now embed all files into OneNote - pdfs, spreadsheets, word docs, images, web clippings.
OneNote is constantly saving all changes so, combined with a scheduled automated backup, everything is in one place and is safe.
There are some built-in collaboration tools I have yet to try but that look useful.
It is SO worth the price. It allows you to get started on a project and avoid all that time spent deciding how to organize things.
Zotero, is a nice plugin for Firefox.
SnagIt
captures everything you could want, and lets you annotate it.
I prefer to use the good old url for delicious
Apart from that i use the Scrapbook extension in firefox when i want to save something on the disk. It's possible to tag the page, edit it and remove those stupids ads before saving it.
I also have a Wiki on a stick that i carry around on a usbkey for code snippets that should go to other clients when i'm travelling around
Mostly, my code snippets are embedded into projects i carry on the same usb key, which allows me to demonstrate some technologies right off to the client and get his advice based on a demonstration, not a listing of code...
For screen shots, I use a mix between ScrapBook and ScreenGrab. They are both firefox plugins that are pretty amazing when you need to get a screenshot of a page for editing. Works great for consulting.
https://addons.mozilla.org/en-US/firefox/addon/427
https://addons.mozilla.org/en-US/firefox/addon/1146
Delicious Bookmarks extension for Firefox
It's a little primitive, but I've been using tiddlywiki (self-contained, single-file wiki) http://www.tiddlywiki.com/ which works good for basic text and markup. I combine it with a plugin to sync it with Outlook's notes (http://syncoutlooknotes.tiddlyspot.com/#SyncOutlookNotes) so that I can then sync it to my blackberry using the standard outlook-blackberry sync mechanism. This has the significant advantage that I can look at my notes and even write new notes when I'm out and about, away from my laptop, or just don't feel like lugging the laptop around to a meeting that I don't really need it for.
I'd prefer using something more advanced like Onenote, but being able to take my notes with my in the little blackberry has turned out to be a significant advantage.
Google Notebook is very convenient tool. You can clip and save any parts of web pages without leaving your browser tab. The Notebook plug-in automatically saves them as separate notes in your notebooks and keep the links back to the original web pages. You can organize your clippings later by moving them between your notebooks and/or tagging them. Very good for code snippets and references.