I have a Windows 2012 R2 server and I managed to install the SonarQube 5.4 server as a Windows Service. I also set up a user so the service can actually start without the infamous "It started then stopped" error a lot of people seem to get. Before installing the server as a windows service, I checked that it worked using StartSonar.bat and it did work just fine, so I was confident when I made it into a service.
But when I try to access http://localhost:9000 there is nothing there, and it appears that shortly after starting the service it stops without any message at all. I can't tell if this is because I try to access the site (which gives me ERR_EMPTY_RESPONSEin Google Chrome) or if it just closes down after a short while.
Anyone got any insight?
I'm a beginner. I came across the same issue and fixed it.
Ensure that the database is running.
My log file (located at sonarqube_home_dir/logs/sonar.log) included the following statement.
Caused by: org.h2.jdbc.JdbcSQLException: Wrong user name or password [28000-176]
Since I'm using the default database, I commented below lines
#sonar.jdbc.username=***
#sonar.jdbc.password=***
at sonarqube_home_dir/conf/sonar.properties.
This must happen due to many reasons like connection problems, permission problems so First, you have to see the logs. /sonarqube-7.6/logs$ tailf sonar.log. then you can find the reason. Once I had the same problem so I did like that. my error is something Directory does not exist: lib/jdbc/mysql
org.sonar.process.MessageException: Directory does not exist: lib/jdbc/mysql reason is I uninstall MySQL and remove all folders name contains "MySQL".
just check whether port 9001 already in used, stop it if already in used.
I use Visual Studio 2010 to debug a asp.net MVC project in my local machine. The steps are:
Click Debug and try to attch process "w3wp.exe". However it is not in the list.
I am sure "Show processes in all sessions" is clicked.
w3wp.exe won't show in the running process' unless there is actually an instance of the web application running.
Try to access your web page first, when it is displayed for the first time, try to attach your debugger. The process should now show up.
You need to click Show Processes from All Users at the bottom of the Task Manager list. This is what i needed to do.
Restart IIS
Right click your site >> Manage Website >> Browse
Back into Visual Studio refresh the processes list
Try to check on :"Show Processes for All Users"
When on the 'Attach to Process' window in the bottom left there is a checkbox 'Show Processes for All Users'
An easy way that works ,when w3wp dont appear in the list,open a browser and write localhost ,then enter.After that w3wp appears to list.
Just because an IIS application pool is started, there may not be an
IIS worker process w3wp running. IIS will not start the worker
process until the first web request is received.
In my case, I first launched the application, still could not find w3wp.exe. Then I took the worker process ID from (IIS->Worker Process -> Process Id) and then search by id in the details tab and found it.
Clear the Solution
Rebuild the solution
Reset the IIS by writing the command iisreset in command prompt
Go to IIS and browse your website
Run VS as administrator
Tools -> Attach to process -> Ensure the 'Show Processes for All Users' checkbox is checked -> w3wp.exe
Attach to w3wp.exec
If you are using something like Advanced Rest Client to test routes, call your route again then refresh the list of processes and it will show up
GoTo Web Project properties -> Select (Web) on the left sidebar -> GoTo under (Servers) header -> Click to dropdown and select "Local IIS"
and apply. Then, when you start debugging you will see w3wp.exe on the proccess list.
I just ran into this issue - you may want to also double check your host settings and verify that you are actually pointed to localhost and not a production server.
I forgot I was pointed at a remote server, and thus, though I was accessing the site, it wasn't anything local so w3wp wasn't running, despite my superficially being able to see the site running.
In my case, I have not opened the Visual Studio in Admin mode that is why the w3wp.exe was not showing on the list.
When I opened the Visual Studio in Admin mode, it worked.
Right click on Visual Studio -> Open in Admin mode.
In my case, once I rebuild the web project and raise the limit of Connection Time out (in seconds), it automatically shows in Debug/Attach to Process list and keeps working.
I would just like to share my experience as well for future readers.
Be aware that, in the event that you have a web server cluster configuration (for load balancing etc) the w3wp process might not start on the same machine that you expect it to.
Unless your website is configured to only run on a single IIS instance, the w3wp process might be spinning up on one of the other machines inside of your web cluster.
This might be faulty configuration from the networking team/department or intended behaviour. I don't have the neccessary experience to pin point exactly how it should be configured.
Found a related page on MSDN as well:
https://msdn.microsoft.com/en-us/library/bb742600.aspx
In my case, I needed to connect from one Visual Studio to the process which running from another VS studio window.
The problem was next: one VS was launched with Administrator permissions. For resolving that issue you should launch both VS with Admin perm.
In my case, the problem was that I wasn't running Visual Studio as Administrator. My machine had restarted after an update and relaunched all the previously running processes, but had only relaunched VS in non-admin mode. When I restarted VS in admin mode, the w3wp.exe processes were available again for debugging.
Run the remote debugger as an administrator.
I followed every suggestion to resolve the issue, but it was not until I ran the remote debugger as an administrator that I was able to see the w3wp process
Try the following steps:
Create a virtual path from Solution Explorer.
Go to inetmgr to confirm that your own pool is created.
Go to Attach Process (Ctrl+Alt+P) and show processes for all users.
Then you will see w3wp.exe will be there.
Be aware that even after jumping through all these hoops (kicking off an instance using a web browser, starting your remote debugging session as an admin, ensuring that "show all users" is checked, etc., ensuring you aren't on a server farm, etc), you may still at times be out of luck.
There are times when the remote process, usually a WCF service in my case, simply will not show up in the list of processes to attach to, and there's nothing that can be done about it. I'm always careful to make my target process readily identifiable by keeping it and only it in a certain App Pool. Sometimes you just can't get there from here. This is undoubtedly the most frustrating thing about remote debugging Microsoft has ever done.
my answer is late for sure, but maybe my answer will help someone.
Go To IIS.
Application Pools.
Advance Setting.
enable 32.bit Application.
Make your Application Running Under enable 32.bit Application.
Whenever a specific Windows service fails I want to run a program I've created myself. However, I simply can't find a way to make it fail on purpose, so that I can actually test that everything works correctly.
Note that the service in question is not something I've written myself, so I can't make it fail programmatically from inside the code. I wouldn't, however, mind writing a program that can make a service fail.
Of course I would prefer just having a "Make service fail" button somewhere in services.msc ... ;)
The server I'm doing this on is running Windows Server 2012.
If you don't want to use command line :
As an admin open the Windows Task Manager, in the Services tab find the service you want to test. Right click the service and click on Go to process. The selected process (if any) is the one corresponding to your service. Kill this process to simulate a service failure.
Be aware that killing a process this way can lead to problems.
Define "fail". If you want the process to end, just use pskill or a similar tool that can terminate a process elevated (as an admin).
im trying to host my website developed in ASP.net4.0 in Ultidev's casini webserver 2.0.
bt when i try to host the same or click on http::/localhost:port, im getting following error.
Utidev webserver's windows service not running.
I dont hav clue on the windows service it's expecting.
Do i need to install any other dependencies ?
Please look at the error pic.
Please help me in this regard.
Thanks.
The host process for that application, DefaultSharedHostProcess, is having trouble starting. Look in the Windows Event Log, as well as "UWS.Installer.log.txt", "RegRepairTrace.txt" and "AppRegTrace.txt" files in the "%ProgramFiles%\UltiDev\Web Server" folder.
As there are a variety of circumstances which can lead to this error, you will need to edit your question and add in the relevant error details you discover from the logs, or go start a thread on UltiDev's support forum. For instance, I encountered this error because of a permissions issue to machine.config in a .NET 4 folder.
Ran into this today, and found if I recycle the host process, I was up and running.
In the UltiDev Web Server Explorer window on the left side, click on the Default Shared Host Process.
On the right side, you'll see a button named "Recycle Host Process". Click it, and answer Yes.
After this, the Windows Service started up, and I was able to communicate with my web app.
Does anyone know how to get the PID of the process that a windows service is running in from Nant?
I am having file locking problems. I issue a stop command to the service and then try and delete the Windows service's files. However these are quite often locked by the process that the Windows service is running in. I want to find the PID so that I can wait for it to terminate before deleting.
Thanks
You might have to create a custom nant task to do this. However you might want to see about just adding maybe a delay like 1 min or something before you try to replace your files. Might be easier.