Basiclly problem is that i can only run my space locally. Either error is "To create a public link, set share=True in launch().", and after doing that RuntimeError: "Share is not supported when you are in Spaces."
intf = gr.Interface(fn=classify_image, inputs=image, outputs=label, examples=examples)
intf.launch(inline=True, share=True)
Anyway to fix it? And what could cause it? It runs locally perfectly fine
Related
I am trying to create a util for logging.
I need to know the actual differences between print() vs debugPrint() and log().
Many answers I have seen are outdated or confusing. Also, some upvoted answers are contradict.
I am trying to print error messages in red color. I am using ANSI code to achieve it.
debugPrint("\x1B[31m HelloDebug \x1B[0m");
The above one print in red color.
But when i do the same using log(), its not printing in red color. Its escaping the ANSI code.
One thing I found out was log() has error parameter.
If i pass something as error , it handles red color by default.
Here in the first one using log, red is not coming because ANSI code is ignored. But in debugPrint using it's working fine. In third one it takes error red by default. But extra line is added even for empty string message.
Code:
Output:
Is it possible use ANSI code for making color text using log?
Because I have other ANSI code to make different color text.
I dont want use debugPrint because if I print some thing too frequently , the system ignore the logs.
After digging some time I found out that log function is implemented in c++ in the dart runtime.As the log function is external function in dart sdk.
external void log(
String message, {
DateTime? time,
int? sequenceNumber,
int level = 0,
String name = '',
Zone? zone,
Object? error,
StackTrace? stackTrace,
});
https://github.com/dart-lang/sdk/blob/main/runtime/lib/developer.cc
Also I see some different answers while digging.
The below answer says debugPrint only available inside widget class. Is it still true?
https://stackoverflow.com/a/52241553/9248098
EDIT:
While using debugPrint and when I launch app from Android studio terminal, the ANSI color is working in android but when I run it same in iOS its escaping the characters in same Android Studio terminal.
If ANSI code support is based on terminal support, I couldn't figure out why its having issue in same terminal in iOS.
It is well explained in this page Debugging Flutter apps programmatically
debugPrint() is similar to print() but with a throttles applied to prevents being dropped by Android’s kernel.
If you have linter setup on VSCode or other IDE, you will see this warning whenever you use print in your code. For more information, you can refer to Avoid print calls in production code.
To avoid the lint error, you can use kDebugMode with print or debugPrint instead.
if (kDebugMode) {
print('test print');
}
// OR
debugPrint('test debugPrint');
As for log(), it actually allows you to include more information on the logging output. For example, you can add the runtimeType and the relevant object in the log that can help you in debugging the code.
log(
'test log',
name: runtimeType.toString(),
error: myObj,
);
** btw I tried log with ANSI code log("\x1B[31m HelloDebug \x1B[0m");, it is working as expected.
I am creating a label printing function in a program that needs to create labels for the given information. I have created a label in Crystal Reports 9 but I'm having trouble printing it.
I don't want to save the label, I just want it to print directly after the system has created it.
Dim ap9 As craxdrt.Application
Dim rpt9 As craxdrt.Report
Dim dbt As craxdrt.DatabaseTable
Set ap9 = New craxdrt.Application
On Error GoTo errError2
Set iniFile = New CIniFile
On Error GoTo errError3
Set rpt9 = ap9.OpenReport(iniFile.pathReports & REPORT_LABEL_IN)
On Error GoTo errError4
For Each dbt In rpt9.Database.Tables
dbt.Location = iniFile.pathDbCosmet
If dbt.ConnectionProperties.count <= 5 Then
dbt.ConnectionProperties.Add "Database Password", iniFile.passwordCosmet
End If
Next
rpt9.RecordSelectionFormula = sFormula
rpt9.PrintOut False, CInt(txtPacksReceived.Text)
The following code allows me to select a printer
and after clicking 'Print' at that point I am shown another dialog
However, the code executes fine, there are no errors, but the print queue doesn't show any documents and the report doesn't print.
Is there some reason why I'm not able to print my labels?
I've had problems with Zebra printers in the past that all turned out to be driver related. Have you uninstalled the printer driver and reinstalled it? Otherwise try unplugging and removing the device, plugging it into a different port and trying again?
Most likely your report doesn't contain any data - some logical error in selection/suppression formulas or similar.
If you print to any other printer, does something print out? Tracing SQL (assuming your report is bound to SQL server), can you see issued query? Does it look correct?
Totally lacking intuition here.
First i thought i only happens when copying and pasting code from editor. Unfortunately it's more common. Only thing I am doing is trying to insert more code somewhere in the middle of current input or modifying it.
Expected behavior:
Modify input without side effects.
What actually happens:
VERY OFTEN when modifying input it gets messed up.
If that happens every key press will copy and insert current input alongside with pressed character.
Vital notes:
Encoding is set to UTF-8 in terminal(s)
Issue persists on different emulators ( Terminator, gnome-terminal )
Issue persists when using different Ruby runtime console ( IRB, Pry )
Issue appears to be related to Ruby runtime, NOT Linux shell (i guess...)
Issue appears since:
Since system install. Didn't appear on my MacBook Air
System:
ArchLinux, although coworker reported same thing happens on his MacBook Pro.
How to reproduce (works for me):
Open rails console
Type example code: Shift.where(name: "som").where(name: "dom").where(name: "pom")
Navigate cursor to modify first where statement.
Change "som" to "SOM"
Should see it break
Press random key repeatedly to see it break even more.
Images:
Good input
Now i will navigate to first where statement to change "som" to uppercase "SOM"
I basically navigated my cursor and pressed SHIFT+S, SHIFT+O, SHIFT+M
Hope it's clear enough :-)
Thank you!
EDIT 1:
Tried using zsh instead of bash, didn't help
Disabled spring gem, didn't help
EDIT 2:
Folks on reddit suggested that i should check if there are any Ruby readline warnings eg. "Readline is not installed". None of them appear anywhere. Also reinstalled ruby 2.4.1, seems like it's not the problem in my case.
EDIT 3:
I cannot reproduce the issue in a different Rails project.
Issue appears on Rails 5.1.1, meanwhile 5.0.3 works flawlessly.
Is it possible that Rails itself (or rather one of its gems) can be the cause?
I had a very similar issue, and I boiled it down to my coloring.
I had the following in my IRBRC:
class String
def _colorize(color_code)
"\e[#{color_code}m#{self}\e[0m"
end
def red
_colorize(31)
end
def yellow
_colorize(33)
end
end
IRB.conf[:PROMPT][:MY_PROMPT] = {
:AUTO_INDENT => true, # enables auto-indent mode
:PROMPT_I => "[ME]".red + " > ".yellow, # normal prompt
:PROMPT_S => "[ME]".red + " ".yellow, # prompt for continuated strings
:PROMPT_C => "[ME]".red + " * ".yellow, # prompt for continuated statement
:RETURN => "[ME]".red + "=> ".yellow + "%s\n".red # format to return value
}
IRB.conf[:PROMPT_MODE] = :MY_PROMPT
And when I removed the .red and .yellow, everything was just fine.
I think it's because my coloring characters like \e[31m was getting counted as a length 5 characters instead of 0 characters.
My solution was to remove my coloring for the time being. Hopefully someone will come up with a better solution than that.
I'm trying to separate out some code from drake/automotive/automotive_demo.cc. As a first step, I'm trying to copy automotive_demo.cc and automotive_demo.py into differently named files (test.cc and test.py) and then running bazel run automotive:test -- --num_simple_cars=1. I modified automotive/BUILD.bazel and test.py to take into account the new dependencies.
The problem is that after I bazel run, the simulator window opens but no car gets rendered. Eventually it just crashes with the following errors:
[lcm-spy] ClassDiscoverer: java.lang.NoClassDefFoundError: apple/laf/AquaPopupMenuUI
[lcm-spy] jar: ../com_jidesoft_jide_oss/jide-oss-2.9.7.jar
[lcm-spy] class: com/jidesoft/plaf/aqua/AquaJidePopupMenuUI.class
...
[drake_visualizer] Qt WebEngine seems to be initialized from a plugin. Please set Qt::AA_ShareOpenGLContexts using QCoreApplication::setAttribute before constructing QGuiApplication.
...
[lcm-spy] LCM: Disabling IPV6 support
[lcm-spy] LCM: TTL set to zero, traffic will not leave localhost.
[lcm-spy] java.net.SocketException: Can't assign requested address
Here is an (unresolved) Github issue that points to the problem being that test is a "custom plug-in". But if automotive_demo can work, surely there's a way to reproduce that behavior for test? I also tried grepping for QGuiApplication and only found a series of binary files, so I didn't know how to follow the error message's suggestion.
when trying out your steps on Mac I unfortunately cannot reproduce your specific errors. I do not think that having test as a target name should cause problems (at least I did not experience issues).
Could you please make sure:
You're able to run bazel run automotive:demo -- --num_simple_car=1?
After having renamed automotive_demo.* to test.*, in your BAZEL.build, test.py files the following are mapped correctly: demo -> test and automotive_demo -> test_cc (or whatever unique name you choose)?
In a mozille extension I run:
SecSess.Logger.info("ctypes test");
Components.utils.import("resource://gre/modules/ctypes.jsm");
SecSess.Logger.info("1");
this.lib = ctypes.open("libcrypto.so");
SecSess.Logger.info("2");
var a = new Uint8Array(1<<10);
SecSess.Logger.info("3");
var ptr = new ctypes.uint8_t.ptr(a.buffer);
SecSess.Logger.info("4");
Why this ugly logging after each step you might ask? Well this code fails without showing me an error. (or at least I can't find the error message)
This is printed:
ctypes test
1
2
3
So the 5th log message is never printed which means the following statement never completes:
var ptr = new ctypes.uint8_t.ptr(a.buffer);
This is a simplified version of some old code I have to work with and which I also found online as being valid. However it doesn't work. This add-on wasn't developped using the new SDK with jpm. Quite frankly I don't know how and when it was developped but I need to run some tests on it. It comes with a few source files ordered in a components and a modules directory and a chrome.manifest and install.rdf in the root. I copied these files to the extension directory of Mozilla in order for it to work. The extension executes but there seems to be a problem with ctypes. Aren't ctypes fully supported anymore or are these old style add-on no longer valid for the modern Firefox?
Regards,
Roel
I think they landed a a patch to disallow making a pointer from buffers. I'll double check.
Edit:
Ah per this: https://developer.mozilla.org/en-US/docs/Mozilla/js-ctypes/Using_js-ctypes/Working_with_ArrayBuffers, you don't have to wrap it with a ctypes.uint8_t.ptr just pass it like a.buffer to wherever you need it. :)