Related
Getting a flipper error log while i am trying to run ios app from xcode.
flipper: Desktop failed to provide certificates. Error from flipper desktop:
rsocket::StreamInterruptedException: connection error
App is working smoothly, no issues found. But this log is coming in every 1 second.
Is there any way to fix this issue?
I had the same issue and I finally found a way to resolve this.
I assume you're getting this error when you try to debug your app with a real iOS device.
These are the steps I took.
You need to run Flipper Desktop on your background. It has an integrated React-devtools plugin. Download it from fbflipper.com. Follow the instructions on their docs it's simple and quite straightforward.
At this point you won't have the same error message. (It will say that the certificate is ok.) However, if you encounter any issues with idb binary location (which I did on my M1 machine), this new message will pop every second and Flipper interface will tell you that the device is not found. Just make sure to find the right idb binary location and configure it, restart Flipper, and this will be resolved one and for all. Mine was in "/opt/homebrew/bin/idb".
TL: DR;
idb_companion was built for newer Swift enviroments, but I was still using Big Sur. After upgrading my MacOS, Flipper managed to connect to my iOS device fine.
Of course I explain below that I build idb from the source to match the version 1.1.8 for both idb_companion and idb.
Below I also explain how I found the error that was crashing idb_companion preventing Flipper from maintaining a stable connection and restarting several times yielding the message: [conn] ... restarted 4 times in 20 seconds.
What I learned:
idb_companion runs on my Mac in the background as a server that knows how to control or get logs from iOS physical devices;
idb is a command line interface that Flipper can use for communicating with idb_companion.
I was able to install idb_companion#1.1.8 using Homebrew. But I was not able to install the same version 1.1.8 for the cli (aka idb (aka fb-idb)).
So I decided to build the idb from the github repo. The command line for building it was
pip3.9 install .
First I struggled with an error related to grpclib version. Apparently idb required the version 0.4.1 but I had 0.4.3 installed. To downgrade grpclib I used the following command:
pip3.9 install grpclib==0.4.1
I also tried to make sure there was no other grpclib installed in other python version, so I ran a bunch of
pip3 install grpclib==0.4.1
pip3.7 install grpclib==0.4.1
pip3.9 install grpclib==0.4.1
To see which version of python I had, I ran a bunch of
which pip
which pip3
which pip3.6
which pip3.7
which pip3.8
which pip3.9
which pip3.10
Anyways...
As I was randomly trying to build idb with those different python versions, with and without sudo, I also faced the following error, which was fixed just by adding sudo again to the build command.
ERROR: Could not install packages due to an OSError: [Errno 13] Permission denied: '/Users/alexandrelage/Library/Python/3.9/lib'
Check the permissions.
Anyways...
Basically after fixing the grpclib requirement, pip3.9 install . inside the source folder was enough for building idb (client, on version 1.1.8).
Of course I had to go to Flipper >> Settings and update the idb path. All seemed good.
Unfortunately that was not enough, Flipper kept on trying to connect to my iPhone device with no success. Then I copied the idb command Flipper was trying to run:
/Library/Frameworks/Python.framework/Versions/3.7/bin/idb file pull --log DEBUG --udid 00008020-000A7D2C36DUMMYDUMMY --bundle-id org.reactjs.native.example.MyExample 'Library/Application Support/sonar/app.csr' '/var/folders/r6/xrp3nw8j4wj45mvdpnlzlv740000gn/T/tmp-10199-CW6olKXUvwek/app.csr'
I was lucky to run the command above while I was also running idb_companion on another tab. The command I used to manually start idb_companion was:
idb_companion --uidid 00008020-000A7D2C36DUMMYDUMMY
I was lucky because I noticed the idb_companion tab stopped running when I tried to run the idb (client) command above I copied from Flipper. I restarted idb_companion again and tried to run the idb (client) command again. Then I realized idb_companion was crashing with an error message:
...
2022-10-21 18:14:11.853-0300 Starting swift server on tcp port 10882
2022-10-21 18:14:11.854-0300 Swift server started on [IPv6]::/:::10882
{"grpc_swift_port":10882,"grpc_port":10882}
2022-10-21 18:14:11.854-0300 Companion will stay alive if target goes offline
2022-10-21 18:14:30.997-0300 Start of connect
dyld: lazy symbol binding failed:
can't resolve symbol _$sScCMa in
/usr/local/Cellar/idb-companion/1.1.8/bin/../Frameworks/IDBGRPCSwift.framework/Versions/A/IDBGRPCSwift
because dependent dylib #rpath/libswift_Concurrency.dylib could not be loaded
dyld: can't resolve symbol _$sScCMa in
/usr/local/Cellar/idb-companion/1.1.8/bin/../Frameworks/IDBGRPCSwift.framework/Versions/A/IDBGRPCSwift
because dependent dylib #rpath/libswift_Concurrency.dylib could not be loaded
That indicated there was something else going on. It seemed idb_companion was built for a Swift environment different to mine. I looked for this error on Google and realized my XCode was outdated. In fact I was still using Big Sur.
Now I upgraded my MacOS to Montrey, Flipper manages to connect to my iOS device fine. And I haven't even upgraded my XCode yet.
Open Flipper > Settings > Enable physical iOS devices
Just grouping everything together, because I had a hard time with this issue...
Open Flipper. In the lower-left corner, click on the gear icon and then on Settings.
Be sure to enable the "Enable physical iOS devices" option.
On "IDB binary location", you'll probably see an alert sign (⚠️). If that is the case, it means you do not have an idb client or it is not right located.
Follow ALL these steps to install the idb companion and idb client.
If you do not have python install: brew install python3. Then try to repeat step 4.
If everything went right, your idb and idb-companion should be located at "/opt/homebrew/bin". So now you can go back to Flipper > Gear Icon > Settings, paste the path "/opt/homebrew/bin/idb" and the alert sign (⚠️) on the right will disappear.
If you still have the alert sign it means your idb file is not in the right location. There are several alternatives in this git post that solve this issue, so check them out.
I am trying to install Erlang in a Mac OS system with Mojave on it. However the installation hangs for no apparent reason:
$ asdf install erlang 22.2.8
asdf_22.2.8 is not a kerl-managed Erlang/OTP installation
The asdf_22.2.8 build has been deleted
Extracting source code
Building Erlang/OTP 22.2.8 (asdf_22.2.8), please wait...
I know the issue is not the network, as I have downloaded everything and the step that hangs forever is the Building step.
I have removed and re-installed both asdf and Erlang from scratch as well, but it didn't fix the issue.
I believe I have all necessary dependencies as well, otherwise the re-installation would have failed.
What can I do to fix this?
Go to ~/.asdf/plugins/erlang/kerl-home/builds/asdf_22.2.8 and look at the otp_build_22.2.8.log file. It should tell you what's going on.
Solution
Thanks to the post by #legoscia I went to ~/.asdf/plugins/erlang/kerl-home/builds/asdf_22.2.8 and looked at the otp_build_22.2.8.log while it was still being built.
By checking this I was actually able to find out that I had a problem with my brew installation, which in turn meant I was using a very outdated version of XCode and XTools.
By forcing an upgrade on my machine (and as a consequence fixing my broken brew installation), I was then able to smoothly run and install asdf install erlang.
I know this is the solution, but I will give credit to #legoscia, as without him/her I would not have been able to fix my issue.
i have an issue when installing Docker. The .exe didn't want to launch (no error message on double click), i'm only able to install it why command line :
install --quiet
.
But then, if i'm able to see the service running in my task managment, it is not here un my task bar.
I'm on Windows 10 Enterprise v1709.
If i force install without --quiet, i have this console error message :
Failed to install: Windows version not compatible.
But my Windows version is clean and updated (hyper-v enable etc...)
It's almost impossible to find any solution after many hours on the problem.
If somebody had any clue :)
Thanks !
While attempting to compile my C program, running the following command:
gcc pthread.c -o pthread
Returns:
Agreeing to the Xcode/iOS license requires admin privileges, please re-run as root via sudo.
and my code does not compile.
Why is this happening and how can I fix this problem?
Open up Xcode, and accept the new user agreement. This was happening because a new version of Xcode was downloaded and the new agreement was not accepted.
sudo xcodebuild -license
will take care of it with no trouble on the command line. Note that you'll have to manually scroll through the license, and agree to its terms at the end, unless you add "accept" to the command line :
sudo xcodebuild -license accept
Got stuck as I was trying to a go get ... I think it was related to git.
Here is how was able to fix it ...
I entered the following in terminal:
sudo xcodebuild -license
This will open the agreement. Go all the way to end and type "agree".
That takes care of go get issues.
It was quite interesting how unrelated things were.
Opening XCode and accepting the license fixes the issue.
You don't need to fiddle around with any command :)
Once the XCode is updated, open the Xcode IDE program. Please accept terms and conditions.
You are all set to go :))
Agreeing to the Xcode/iOS license requires admin privileges, please re-run as root via sudo.
A new version of OSX or XCode was installed and Apple wants you to agree to their Terms and Conditions. So just launch Xcode and "Agree" to them.
I had the same issue, after accepting the license launching XCode or running sudo xcodebuild -license accept i had to restart my Mac – otherwise it did not worked.
Follow these steps:
Open Terminal.
Enter this command: sudo xcodebuild --license.
Enter system password.
Agree to the license.
I had the same issue when I tried to use git.
It is possible to install git without it. And I doubt that gcc on mac is truly dependent on XCode. And I don't want to use root to accept something unless I'm sure I need it.
I uninstalled XCode by navigating to the applications folder and dragging XCode to the trash.
Now my git commands work as usual. I'll re-install XCode if/when I truly need it.
I'm facing the same issue.
The issue because of X-Code.
Solution:
1. Open X-code and accept user agreement (T&C).
or
2. Restart your MAC, It will resolve automatically.
If you have similar issues in Intellij do as others said above me :
Open Terminal.
Enter this command: sudo xcodebuild --license.
Enter system password.
Go to the end of file: Press space(button) to do that.
Type 'Agree' to the license.
And you are done.!!
if shortly I got error when tried install ImageMagic from ports on FreeBSD. Any solutions how to fix it?
%make install clean
===> ImageMagick-nox11-6.5.8.10_1 is marked as broken: hdri support broken, disable in options.
*** Error code 1
Stop in /usr/ports/graphics/ImageMagick.
Sure, run make config and deselect HDRI option.