i have an issue when installing Docker. The .exe didn't want to launch (no error message on double click), i'm only able to install it why command line :
install --quiet
.
But then, if i'm able to see the service running in my task managment, it is not here un my task bar.
I'm on Windows 10 Enterprise v1709.
If i force install without --quiet, i have this console error message :
Failed to install: Windows version not compatible.
But my Windows version is clean and updated (hyper-v enable etc...)
It's almost impossible to find any solution after many hours on the problem.
If somebody had any clue :)
Thanks !
Related
This might just be me doing something stupid but I'm getting a popup message on running java --version when I use the install: graalvm-svm-java11-darwin-m1-gluon-22.1.0.1-Final
"graalvm-svm-java11-darwin-m1-gluon-22.1.0.1-Final” is damaged and can’t be opened
Does anyone else have the same issue? I've switched to my Pentium MacMini, so it's not urgent; but I do need Java11 and not 17 due to a dependency issue.
The following versions all run correctly and were installed using the same procedure and I have set the necessary quarantine paths.
graalvm-ce-java11-22.3.1
graalvm-svm-java11-darwin-gluon-22.1.0.1-Final
graalvm-svm-java17-darwin-gluon-22.1.0.1-Final
openjdk11-openj9
graalvm-svm-java17-darwin-m1-gluon-22.1.0.1-Final
So it's only the ...-java11-...-m1...tar that gives the message.
I looked for an older m1 release, but 22.1.0.1 was the only one I could see.
The GraalVM build graalvm-svm-java11-darwin-m1-gluon-22.1.0.1-Final downloaded from https://github.com/gluonhq/graal/releases works just fine.
When you use the GluonFX plugin, the first time you run mvn gluonfx:build you get prompted to add a password, just to remove the quarantine from it.
But if you want to run anything like /path/to/graalvm/bin/java -version before that, the folder is still under quarantine, that won't work, and you will get the error that you posted:
"graalvm-svm-java11-darwin-m1-gluon-22.1.0.1-Final” is damaged and can’t be opened
You just need to remove the quarantine yourself, running:
sudo xattr -r -d com.apple.quarantine /path/to/graalvm
See the open issue https://github.com/oracle/graal/issues/1724 for reference.
I'm trying to build the "latest" version of Appium Desktop from source (on a Mac), but I'm clearly not doing something that I need to be doing, because no binary is generated after I run all the build commands.
So, I've downloaded and unpacked the .zip archive https://github.com/appium/appium-desktop/archive/v1.16.0.zip, opened up a terminal session inside the root of the source directory, and followed the online instructions for building from source--but I think this is for the server build https://appium.io/docs/en/contributing-to-appium/appium-from-source/#running-appium-from-source
npm install
npm run build
node .
And it all appears to work successfully! I get a "build completed" message and life looks fab, but nothing launches as far as an app is concerned, and I can find no .app file anywhere in the source directory. And, oddly, there are no build instructions to be found anywhere in the source directory. There's a "ReadMe.md" file but it provides no instructions on how to build from source.
Can someone please tell me what I need to do to build and launch Appium Desktop (not the server) from source? (Oh, I also ran appium-doctor and it gave me a clean bill of health.)
Any feedback would be most appreciated!
Thanks,
Wulf
You've already run npm install so it should be as simple as running npm run dev if you want it in dev mode or npm start if you want non-dev.
See the Contributing to Appium Desktop readme for more.
When I run Appium doctor it shows:
Running iOS Checks
✖ Unknown SW Version Command: Error: Command failed: /bin/sh -c sw_vers -productVersion
/bin/sh: sw_vers: command not found
Appium-Doctor detected problems. Please fix and rerun Appium-Doctor.
Can anyone help let me know what is the wrong here?
running this solved my problem:
sudo xcode-select -s /Applications/Xcode.app/Contents/Developer
You need to install the command line tools as marked in your message:
✖ Xcode Command Line Tools are NOT installed
From osxDaily:
Launch the Terminal, found in /Applications/Utilities/
Type the following command string:
xcode-select --install
A software update popup window will appear that asks: “The xcode-select command requires the command line developer tools. Would you like to install the tools now?” choose to confirm this by clicking “Install”, then agree to the Terms of Service when requested (feel free to read them thoroughly, we’ll be here)
Wait for the Command Line Tools package download to complete, it’ll be about 130MB and installs fairly quickly depending on your connection speed
The installer goes away on its own when complete, and you can then confirm everything is working by trying to use one of the commands that were just installed, like gcc, git, svn, rebase, make, ld, otool, nm, whatever you want from the list below. Assuming the installation went uninterrupted, the command will execute as expected. This also means you can compile and install things from source code directly without having to use a package manager. Enjoy your new unix command line toolkit!
Have you tried upgrading to the latest Appium version? Are you installing Appium through terminal? My appium-doctor issues were fixed after I installed Appium through terminal and updated the path variables in .bash profile. Appium desktop application is different than one installed through command line.
There are only two possible area which causing that error:
You need to keep all path veriable updated and correct in .bash_profile
You must install
XCode
NodeJS
properly. You must have all permission to access those.
Install all latest version of following things
JDK (Java Development Kit),
Xcode ,
Command Line tools ,
APPIUM For MAC OS
In my case, xcode command line tool isn't set. Simply go to Xcode>Preferences>Locations>Select desired Xcode version in Command Line Tools. OR from terminal follow Chhagan's answer xcode-select -s your path
I am developing a django app and it will utilize the Celery notification system. To use Celery I need the install the RabbitMQ server. I am trying to install it using homebrew. So I just:
sudo brew install rabbitmq
But erlang is a prerquisit for the install. So Homebrew tries to compile erlang-otp (R14B03), but during this process it always gets stuck for hours. I even let it sit over night and nothing happend. So I aborted the compilation and did:
sudo brew install -v erlang
to see the progress of the compile. It gets stuck a the and states the following error:
=== Entering application hipe
(cd ../main && make hipe.hrl)
sed -e "s;%VSN%;3.8;" ../../hipe/main/hipe.hrl.src > ../../hipe/main/hipe.hrl
erlc -W +debug_info +inline -o../ebin hipe_rtl.erl
(no error logger present) error: "Error in process <0.1.0> with exit value: {{badfun,[<<5 bytes>>,<<69 bytes>>,<<9 bytes>>,<<3 bytes>>,<<2 bytes>>,<<5 bytes>>,<<11 bytes>>,<<2 bytes>>,<<8 bytes>>,<<8 bytes>>,<<5 bytes>>,<<7 bytes>>,<<5 bytes>>,<<11 bytes>>,<<2 bytes>>,<<11 bytes>>,<<15 bytes>>,<<4 bytes>>,<<72 bytes>>,<<5 bytes>>,<<1 byte>>,<<7 bytes>>,<<10 bytes>>,<<7 bytes>>,<<6 bytes>>,<<7 bytes>>,<<7 bytes>>,<<6 bytes>>,<<12 bytes>>]},[{erlang,apply,2}]}\n"
I've tried it multiple times, but I get he same result. Could be because I have the wrong version of autoconf? Have any of you guys had a similar experience? What are some recommendations to get a successful compile?
I appreciate the help. Many thanks in advance.
Erlang has problems building with Xcode 4's compilers.
You should be able to get it to compile if you turn off optimization with CFLAGS=-O0.
You can get a pre-compiled package for Mac OSX from Erlang Solutions.
I had the same issue on a new Lion install with Xcode 4.1. The following command installed erlang successfully.
brew install erlang --use-gcc
I'm trying to install rb-rmagick and running into some trouble. The installation stops at "Building rb-rmagick". I know it takes a while, so I let it run overnight, but still don't see any progress. I'm running it on a brand new MacBook Pro so speed/memory shouldn't be an issue.
From http://rb-rmagick.darwinports.com/, the instruction says to do cd /opt/local/bin/portslocation/dports/rb-rmagick before you run sudo port install rb-rmagick, but I don't have the portslocation directory in my bin.
I've installed macPort.
I found out there's actually an error after doing sudo port -v install rb-rmagick. A font file was missing. There are a couple of ways to solve this. trac.macports.org/ticket/19602 has some explanation.