I have webcenter sites 11gR installed. In the futuretense.ini file I have the following fields blank:
satellite.blob.cachecontrol.default=
cs.satellitehosts=
cs.satelliteusers=
cs.satellitepassword=
Additionally it has two satellites to which access like this:
x.xx.xx.xx:port/servlet/Inventory?username=SatelliteServer&password=pass1
x.xx.xx.yyy:port/servlet/Inventory?username=SatelliteServer&password=pass2
in sites.los the following error is presented:
Error code:REMOTE SATELLITE SERVER CONNECTOR ERROR
Is the furetetense.inio file related to the error?
Do I need to set the host , user and password?
Which password should I use?
Related
This question is about Jenkins LDAP root DN & Display Name LDAP attribute
Environment:-
Jenkins Version - 2.235.5(LTS)
LDAP Plugin - 1.24
I am trying to configure LDAP(AD) Authentication in our Jenkins, Below is the configuration settings.
root DN - DC=Company,DC=domain,DC=com
User search base: OU=Users,OU=Division,OU=Team,DC=Company,DC=domain,DC=com
User search filter: sAMAccountName={0}
Group search base: OU=Users,OU=Division,OU=Team,DC=Company,DC=domain,DC=com
Group search filter: (&(objectclass=group)(cn={0}))
Group membership
Group membership filter - (&(objectCategory=group)(member:1.2.840.113556.1.4.1941:={0}))
Manager DN: CN=jenkins,OU=Users,OU=Division,OU=Team,DC=Company,DC=domain,DC=com
Manager Password: password
Display Name LDAP attribute: displayname
Email Address LDAP attribute: mail
But while testing the LDAP connection it fails below error.
Login
Authentication: failed for user "jenkins-user"
Lookup
User lookup: failed for user "jenkins-user"
LdapCallback;[LDAP: error code 32 - 0000208D: NameErr: DSID-03100241, problem 2001 (NO_OBJECT), data 0, best match of:
'DC=domain,DC=com'
]; nested exception is javax.naming.NameNotFoundException: [LDAP: error code 32 - 0000208D: NameErr: DSID-03100241, problem 2001 (NO_OBJECT), data 0, best match of:
'DC=domain,DC=com'
]; remaining name 'OU=Users,OU=Division,OU=Team,DC=Company,DC=domain,DC=com'
LDAP Group lookup: could not verify.
Please try with a user that is a member of at least one LDAP group.
Lockout
The user "jenkins-user" will be unable to login with the supplied password.
If this is your own account this would mean you would be locked out!
Are you sure you want to save this configuration?
Suppose if i keep the root DN as empty and enabled the tick mark - Allow blank rootDN. my test connection is getting successful.
But i would like to know that currently i am running root DN as empty and enabled - Allow blank rootDN in plugin section. Is this is fine for production environment?
Also for the logged in users, The display name shown as below which is too lengthy.
First-Name/Sur-Name/Team-Name/Location/Title/Company-Name
i would like to display only First-Name + Sur-Name. For this i tried to change Display Name LDAP attribute: with name, givenName, cn & sn but none of them were worked. So is it possible to display only First name + Sur-name in Jenkins?
I have fixed it. Each time when we change/update the Display Name LDAP attribute value in LDAP configuration section, We need to delete the user from people category and need to login. Post that it displays the configured settings.
I am new using Talend and Snowflake cloud.
I am trying to conet Talend using the component "Snowflake Connection", and complete with this settings:
user:XXX
password: YYY
Schema: TPCH_SF1
Database: SNOWFLAKE_SAMPLE_DATA
and give me this error: .net.snowflake.client.jdbc.SnowflakeSQLException: Incorrect username or password was specified.
But this user I can enter in Snowflake.
Can anyone help me please.
I tried reproducing it. Just to clarify different component what error comes through i have written down all different error come when which component throws error.
If snowflake account is wrong
java.lang.RuntimeException: JDBC driver encountered communication error. Message: HTTP status=403.Incorrect Snowflake Account was specified
For this error we need to change the account name
Snowflake Region is wrong for valid snowflake account. 403 error is thrown
something like below.
"ERROR [main, net.snowflake.client.jdbc.SnowflakeUtil:logResponseDetails:449] -- Response content: 403 ERROR "
you can define region name in Advance setting by checking in use Custom Snowflake Region for connection.
Snowflake username or password is incorrect for the account.
JDBC driver not able to connect to Snowflake. Error code: 390100, Message: Incorrect username or password was specified..
Hope this helps.
I have tried most of the configuration examples of user to return a Configuration-Token attribute. I need an example configuration and which file to place it in (e.g. user or user.conf).
tried something like (in user.conf):
testing Cleartext-Password := "password"
reply: Configuration-Token="hello"
This caused freeradius to not run
Freeradius would not execute.
I am trying to issue an identity to a participant that already exists in the network.
return this.bizNetworkConnection.connect(this.cardname)
.then((result) => {
let email = 'user#gmail.com',
username = email.split('#')[0];
this.businessNetworkDefinition = result;
return this.bizNetworkConnection.issueIdentity('org.test.Person#user#gmail.com', username);
})
.then((result) => {
console.log(`userID = ${result.userID}`);
console.log(`userSecret = ${result.userSecret}`);
})
I expect that I will see the userID and the userSecret logged on the console but I am getting errors as described below.
Following the developer tutorial on their documents:
If I use the card name for PeerAdmin#hlfv1 on the connect function above, I get the error. "Error trying to ping. Error: Error trying to query business network. Error: Missing \"chaincodeId\" parameter in the proposal request"
If I use the card name for admin#tutorial-network on the connect function above, I get the error "fabric-ca request register failed with errors [[{\"code\":400,\"message\":\"Authorization failure\"}]]"
For option 1, I know the network name is missing in the given card, whie option 2 means that the admin has no rights to issue an identity. However, I cannot seem to find any documentation directing me on how to use either to achieve my objective. Any help is highly welcome.
While I have listed the javascript code I am using to achieve the same, I would not mind if anyone can explain what I am missing using the composer cli.
see https://hyperledger.github.io/composer/latest/managing/identity-issue.html
you would definitely use the admin#tutorial-network card, as PeerAdmin does not have authority to issue identities (admin does).
Did you already do: 1) a composer card import -f networkadmin.card (per the tutorial) ? 2) a composer network ping -c admin#tutorial-network to use the card (now in the card store) and thereby populate the admin's credentials (certificate/private key).
Only at that point would admin be recognised as the identity to issue further identities. Is it possible you spun up a new dockerized CA server at some stage since you did the import etc ?
What happens if you issue a test identity through the command line (using admin#tutorial-network? Does it fail)
I installed ERP "Openbravo" following the custom approach:
So I followed the steps from the tutorial.I set "localhost" for the parameter "Web URL" in the configuration file. After that I ran the servers, Apache and Tomcat.
When accessing the application via browser using http://localhost/openbravo
The problem I am facing is that,the browser doesn't find some components.
I got this log in console of Google-chrome like this:
Login_F1.html:11 GET http://localhost/openbravo/security/localhost/js/ajax.js 404 (Not Found)
When i try to accede to the previous url in a new tab i got "not found",
but when i change by this URL "http://localhost/openbravo/web/js/utils.js" works well.
My question is that how i can make Openbravo generate "/web/" instead "/security/localhost/".
If you look at Openbravo.properties file
.....
//Static content URL. Use the default value to make it dynamic.
//Don't change this unless you know what you are doing
web.url=#actual_url_context#/web
// Full URL of the context, *only* used by the Web Services installation
and diagnostic task
context.url=http://localhost:8080/openbravo
.....
#actual_url_context# will get replaced by domain name with port number and application context name (for example: mydomain:8989/openbravo)
404 is due to application is not able to locate ajax.js under
../web/ajax.js
1 ==> To fix the issue you can just restore to #actual_url_context# and perform smartbuild.
or do an install.source
2 ==> To add any client side customization or to support static content under web folder you can follow
an example: http://wiki.openbravo.com/wiki/How_to_add_a_button_to_the_toolbar
http://wiki.openbravo.com/wiki/How_to_create_a_Manual_UI_Process