We are trying to configure a multibrnach pipeline job in jenkins ,its working fine for branch specific trigger but its not working for pull request... Not triggering the jenkins build when there is a pull request raised
Please note we have to use ssh protocol only due to some https issues for our repo
Kindly help us if there is any example with jenkins using ssh protocol and triggering the PR builds
Jenkins+Bitbucket(ssh protocol)
Related
I have the following initial situation:
I have a Docker container running Jenkins 2.379
This Jenkins has the Bitbucket Server Integration and the Bitbucket Branch Sourch Plugin installed
The connection to the Bitbucket server seems to work
I also set up a multibranch pipeline that listens to the repository in the connected Bitbucket server instance
And I have set the Scan Multibranch Pipeline Trigger to All pushes.
Finally, it seems that Jenkins has correctly implemented the webhook in the corresponding Bitbucket project.
Changes to some configurations of the multibranch pipeline trigger the scan process, which works properly. If there are changes in the code of the corresponding branch during a push, the build is triggered.
Clicking the "Scan Multibranch Pipeline Now" button has the same result.
But if I just push some code changes into a branch, nothing happens. My pipeline does not start automatically and no build process is started with the changes made.
Goal: Every push a developer does in a branch of this project should trigger the scan for new branches in Jenkis and the build process for new branches or those where something has changed.
I have found the problem/solution. As I said, my Jenkins runs in a Docker container and is hosted locally on my PC (localhost:8080).
Through the credentials, the path from Jenkins into Bitbucket worked and so did creating the webhook. However, for this webhook, the Bitbucket server plugin entered its address (localhost:8080). So now when a push into a Bitbucket repo happens, this webhook was triggered on Bitbucket's localhost:8080 (so presumably Bitbucket itself and not Jenkins).
The solution was now quite simple. I used a tool called ngrok to make my localhost:8080 (on which Jenkins runs) accessible via a URL from the internet.
I then only had to store this URL in Jenkis in system configurations and adapt the webhook in my Bitbucket repository.
I have a Jenkins Pipeline that is connected to a Bitbucket Server Repo.
The pipeline is configured with the Bitbucket Jenkins Plugin (version: 223.vd12f2bca5430) and is inside a Docker Container (PORT 8000).
To connect to the Bitbucket Server I have to use a VPN.
I have followed multiple tutorials and articles and failed. This seems a recurrent problem since I have seen multiple questions about this.
When I build the pipeline manually it works fine. It clones the repository and starts the building process but I cannot make the webhook trigger the building process.
Below you can see the configuration.
Jenkins System Settings - Successfull Connection
Pipeline Configuration (Build Triggers)
Pipeline Configuration (Pipeline - Successfull Connection)
When I run the pipeline manually for the first time, the webhook is created in the repository with the following URL: http://localhost:8080/bitbucket-server-webhook/trigger
But when I test the Webhook, it fails everytime a returns the following message:
Unable to connect to the URL specified within the timeout, please check the host and port are correct and that the URL is accessible from the server running this request.
Webhook Config inside Bitbucket Server (Test Fail)
Is this a problem with my Bitbucket Server?
Thank you for your time.
I am looking to auto create jobs in jenkins upon pull request , branches, master push etc similar to what we do in Gitlab. My SCM is butbucket here.
I have so far setup docker based agent integration with Jenkins and butbucket, when I create a job and configure it to use repo it all works fine , but I just want to remove altogether a step of job creation in jenkins and want the workflow like this:
In butbucket source code repo to keep all pipeline configuration for and branch and tag to trigger Jenkins pipeline without touching Jenkins for job creation or any config creation. Just want to drive all via the script in code repo for pipeline .
Any recommendations or help for workflow would be appreciated
I got the answer to my Question , hence listing the steps for very simple use case for how it would work.
Steps:
Go to bitbucket server repository to which you want to enable pull request based trigger. Add Post Recieve Hook to this repository "Webhook to Jenkins for Bitbucket Server" , Enable this hook to have connection to jenkins. Enabling this plugin will issue POST request to jenkins each time a new Pull request is opened.
On Jenkins Server this will work with Blue Ocean Pipeline which by default will pick the change for pull request branch and trigger the job on each pull request.
Blue Ocean pipeline will by default create multi branch pipeline job to work with bitbucket repository.
I am trying to trigger jenkins pipeline on gitlab push to branch and tag.
Using Jenkins ver. 2.176.2 and gitlab version 10.7.3-ee.
Although I have supposedly set up the webhooks properly, I do not see the jenkins job being triggered.
I have installed the gitlab plugin for jenkins, and configured the gitlab server, including the Personal Access Token for GitLab APIs access generated in gitlab.
I have defined the webhook (currently requesting trigger on all events). (for testing, ssl verification is off).
When testing the webhook in gitlab, I consistently receive HTTP error 500.
In jenkins pipeline job, I have selected "build when change is pushed to gitlab. gitlab webhook..." - this is the URL I used when defining the webhook in gitlab, under "integrations" section.
When pushing to gitlab, I see no event listed under "integrations -> recent deliveries",
I see no log under jenkins logs "com.dabsquared.gitlabjenkins" logger (set to log level "FINEST".
And lastly, the pipeline job is not triggered as I expected.
Any leads will be very helpful.
Adding printscreen of the Jenkins configuration of the gitlab for reference to the comment I added on possibility this is issue with the personal access token
Jenkins gitlab server configuration
Go to Settings of Gitlab Project -> Integrations and type in the Jenkins Job project url in 'URL'. URL should take either form:
http://JENKINS_URL/project/PROJECT_NAME
http://JENKINS_URL/project/FOLDER/PROJECT_NAME
Notice that the url does not contain "job" within it and instead uses "project".
Make sure under Triggers, you have "Push Events" checked as well if you want the job to trigger whenever someone pushes a commit.
Finally, run a build against your Jenkinsfile first before testing the webhook so Jenkins will pick-up the trigger settings for Gitlab.
Please refer the link for more details.
This question already has answers here:
How to trigger jenkins build upon bitbucket pull request merged
(2 answers)
Closed 5 years ago.
I have a Jenkins job which I want to trigger when I evaluate a pull request on Bitbucket. The Jenkins job is correctly configured (by the looks of it) with the 'Poll SCM' option checked.
I have setup the 'Bitbucket Server Webhook to Jenkins' as follows. When I click on 'Trigger Jenkins' as part of the configuration check, it works well. Corresponding logs on the Jenkins server show up properly.
Now, when I receive a pull request, I would want to trigger the same Jenkins job. However, which I click on the 'Trigger Build' option, nothing happens. The Jenkins job is not triggered. I dont see correspnding logs on the Jenkins server. No logs on the bitbucket server as well.
Where am I going wrong?
I am using an 'Atlassian Bitbucket v4.7.1' evaluation installation and a Jenkins 1.651 installation.
Just tried bitbucket 4.13 with webhook to jenkins for bitbucket 3.0.1 plugin. Follow the instruction on the plugin site, you need to install the git plugin on the jenkins side, enable git checkout and make sure it works, and enable polling of scm. The jenkins version used is pulled from docker hub with tag jenkins/jenkins:lts.
If the above does not work for you, from my reading you can have a few options as of today Nov 12 of 2017:
Use the generic post webhooks plugin that supports pull request trigger. And from jenkins pick it up with the generic webhooks plugin, then maybe do a secondary trigger from jenkins.
Upgrade the bitbucket server and webhooks to jenkins plugin. The server 4.13 does not work well with later webhooks to jenkins plugin. A paid version of the plugin probably is your best choice.
Or try bamboo that comes with the "plan banches" feature.