I have a Google ads script that will find any ad groups with on active RSA's, and export the campaigns and ad group name to a Google Sheet.
But sometimes then it runs it says it "Failed due to system errors" and gives the following error message:
7/11/2022 3:50:02 PM Exception: Call to GoogleAdsService.Search failed: The request took too long to respond.
at adsapp_compiled:18112:138
at adsapp_compiled:18123:9
at sa (adsapp_compiled:227:15)
at Object.search (adsapp_compiled:235:20)
at iI.search (adsapp_compiled:18238:36)
at SH.search (adsapp_compiled:17815:19)
at TH.search (adsapp_compiled:17910:20)
at $H.search (adsapp_compiled:18002:19)
at fd (adsapp_compiled:1041:32)
at fd.next ()
I think it is a runtime error, because it doesn't receive any response from the server.
i have been told it might have something to do with the syntax order, but i don't know how to fix that if that is the case.
I have tried to do the export to a new clear sheet, just to see if the sheet i used had to many formulas in it which could slow it down, but it still gave the same error message.
I have also tried to do it on an entirely different account that is smaller but still same issue.
/**********************
RSA Checker
**********************/
var SPREADSHEET_URL = 'INSERT SPREADSHEET URL HERE';
var Sheet_name = 'INSERT SHEET NAME HERE';
function main() {
var sheet = SpreadsheetApp.openByUrl(SPREADSHEET_URL).getSheetByName(Sheet_name);
var range = sheet.getRangeList(['A1:A', 'B1:B'])
range.clearContent();
sheet.getRange("A1").setValue("Campaign");
sheet.getRange("B1").setValue("Ad groups");
var GetAdGroups = AdWordsApp.adGroups()
.withCondition('Status = ENABLED')
.withCondition('CampaignStatus = ENABLED')
.withCondition("AdvertisingChannelType = SEARCH")
.withCondition("CampaignName DOES_NOT_CONTAIN_IGNORE_CASE 'dsa'")
.withCondition("AdGroupName DOES_NOT_CONTAIN_IGNORE_CASE 'dsa'")
.withCondition("campaign.experiment_type = BASE")
.get();
for (var row = 2; GetAdGroups.hasNext(); row ++) {
var AdGroups = GetAdGroups.next();
var RSACount = AdGroups.ads().withCondition('Type=RESPONSIVE_SEARCH_AD').withCondition('Status = ENABLED').get().totalNumEntities();
if ((RSACount < 1)) {
sheet.appendRow( [AdGroups.getCampaign().getName(), AdGroups.getName()] );
}
}
}
Related
Need your help and expert guidance as I need my google sheet to send emails every time a condition becomes true in "K" column which is named "Subject" as a header in the tab name "Analysis". Whenever I run the below code. Similarly last 3 lines I get while running the code as errors. Please explain in a simple possible way and not too much technical
function sendEmail(){
var ss = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Analysis");
var range = ss.getRange("J2:J35");
range.clear();
var n = ss.getLastRow();
for (var i = 2;i<n+1; i++){
var emailRequired = ss.getRange(i,9).getValue();
var subject = ss.getRange(i,11).getvalue();
var message = ss.getRange(i,12).getvalue();
if (emailRequired=="YES"){
MailApp.sendEmail("ksm272364#gmail.com",subject,message);
ss.getRange(i,10).setvalue("YES");
}
}
}
1:21:51 PM Error
TypeError: ss.getRange(...).getvalue is not a function
sendEmail # Code.gs:8
I am trying to have my function use three sheets within its embedded spreadsheet: two fixed sheets and one active/open sheet. I need it to read the sheet I have open because that is the sheet I am changing week to week, but it is automatically defaulting to using the first sheet rather than the sheet I have opened. I altered this function from an existing function I have that works, and on this new one I only changed the message and its assigned variables. I really know absolutely nothing about coding but have been learning so I can create a custom message from a code a previous coworker wrote. I appreciate all of the help I can get x10000
function createMessage(address, dirtrider, day, window, outby, phone) {
{ var message = 'Hello ' + address + ', welcome to IVCC\'s composting program! You\'ll be receiving weekly automated reports from this number (a weekly reminder to put your bucket out and a notification if any incorrect items were discarded into your bucket). To stop receiving these messages, reply STOP. We are currently restructuring our biking routes, therefore you may be receieving a new Dirtrider according to this message. Starting next week, you\'re assigned Dirtrider will be ' + dirtrider + ', and you\'re new bucket will arrive weekly on ' + day + '\'s sometime between ' + window + '. Please have your bucket outside your front door by ' + outby + ' on this day weekly unless notified of a change. This is an automated messaging service, so please reach out to your Dirtrider directly at ' + phone + ' with any questions or concerns about your service. Thanks for composting with us! -IVCC Team';
}
return message;
}
// function to verify numbers and messages before sending //
function PrintMessages() {
var mainsheet = SpreadsheetApp.getActiveSheet();
var data = mainsheet.getDataRange().getValues();
var contactsheet = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Contact Sheet");
var contacts = contactsheet.getDataRange().getValues();
var messageLog_sheet = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Message Log");
var messageLog = messageLog_sheet.getDataRange().getValues;
var mLrow = 2 //row to start at on Message Log spreadsheet
// runs through every row of active spreadsheet, i = row //
for (var i = 2; i < data.length; i++) {
// set variables based on values in sheet and create message//
var address = data[i][0];
var day = data[i][1];
var window = data[i][2];
var outby = data[i][3];
var dirtrider = data[i][4]
var phone = data[i][5]
var message = createMessage(address, dirtrider, day, window, outby, phone);
// reference seperate contact sheet, j = column //
var nresidents = contacts[i][2];
for (var j = 1; j <= nresidents; j++) {
// log address, phone number, and message function //
var address = contacts[i][0];
var number = contacts[i][j+2];
var messageArray = [[address, number, message]];
var range = messageLog_sheet.getRange(mLrow, 1, 1, 3); //ENTER COMMENTS
range.setValues(messageArray);
var mLrow = mLrow + 1;
}
}
}
I have a Google Sheet which hides some sheets from most users, but when an admin user is identified, has a menu option to show all the sheets. It calls my function showAllSheets, as follows:
function showAllSheets() {
var sheets=SpreadsheetApp.getActiveSpreadsheet().getSheets();
for(var i = 0; i < sheets.length; i++){
//Show each sheet
sheets[i].showSheet();
console.log('Showing Sheet: ' + sheets[i].getName())
}
}
But this function doesn't always work. I get very mixed results. Sometimes it shows all sheets as expected. Sometimes it shows some of the sheets. Sometimes it eventually shows all or some of the sheets but only after a long delay (1 minute+) and sometimes, it does nothing at all.
I'm checking my execution time in the "Executions" section of Apps Script. This function typically executes in about 2-3 seconds and the console log contains all expected messages. It will say "completed" and still my sheets aren't showing. Sometimes it will eventually show the sheets some time after it says execution is complete and again, sometimes they never show.
I have an onOpen installable trigger and an onSelectionChange simple trigger, so at first I was concerned maybe my scripts are running into each other. However, I've confirmed I still have this issue even if I make sure all other scripts have completed before I run it.
I have no issues with .hideSheet() in my functions that hide the sheets (one being RestoreDefaultView, the other in my onOpen trigger.). They always get hidden immediately.
Here is the menu code I'm using:
var ui = SpreadsheetApp.getUi();
if (thisuser.group == 'admin') {
ui.createMenu('MyProject(Admin)')
.addSubMenu(
ui.createMenu('View')
.addItem('Restore Default Sheet View', 'restoreDefaultView')
.addItem('Show All Sheets', 'showAllSheets')
)
.addToUi();
}
What is going on and what can I do to fix it?
EDIT: Per request, here is the function that is hiding some of the sheets:
function restoreDefaultView() {
const name_Master = 'PROJECT MASTER';
const name_Lists = 'LISTS';
const name_Guide = 'GUIDE';
const name_Access = 'ACCESS';
const name_ActionForm = 'frm_Action';
const name_ProjectForm = 'frm_Project';
const name_NotesForm = 'frm_Notes';
const name_AdminForm = 'frm_Admin';
const name_GroupAdmin = 'admin_Groups';
//const id_ProjectList = '(redacted)'; // Google Drive file ID of Project List'
//const id_TaskList = ''; //Google Drive file ID of Task List
var ss = SpreadsheetApp.getActiveSpreadsheet();
var sht_Master = ss.getSheetByName(name_Master);
var sht_Guide = ss.getSheetByName(name_Guide);
var sht_Lists = ss.getSheetByName(name_Lists);
var sht_Access = ss.getSheetByName(name_Access);
var sht_ActionForm = ss.getSheetByName(name_ActionForm);
var sht_ProjectForm = ss.getSheetByName(name_ProjectForm);
var sht_NotesForm = ss.getSheetByName(name_NotesForm);
var sht_AdminForm = ss.getSheetByName(name_AdminForm);
var sht_GroupAdmin = ss.getSheetByName(name_GroupAdmin);
//Sheets Normally Displayed
//Immediately activate Master sheet after making visible to minimize confusion
sht_Master.showSheet();
sht_Master.activate();
sht_Guide.showSheet();
//Sheets Normally Hidden
sht_Lists.hideSheet();
sht_Access.hideSheet();
sht_ActionForm.hideSheet();
sht_ProjectForm.hideSheet();
sht_NotesForm.hideSheet();
sht_AdminForm.hideSheet();
sht_GroupAdmin.hideSheet();
}
Try this:
function showAllSheets() {
var sheets=SpreadsheetApp.getActiveSpreadsheet().getSheets();
for(var i = 0; i < sheets.length; i++){
sheets[i].showSheet();
SpreadsheetApp.flush();
console.log('Showing Sheet: ' + sheets[i].getName())
}
}
I'm developing a google spreadsheet that is automatically requesting information from a site, below is the code. The variable 'tokens' is an array consisting of about 60 different 3 letter unique identifiers. The problem that i have been getting is that the code keeps failing to request all information on the site. Instead it falls back (at random) on the validation part, and fills the array up with "Error!" strings. Sometimes its row 5, then 10-12, then 3, then multiple rows, etc. When i run it in debug mode everythings fine, can't seem to be able to reproduce the problem.
Already tried to place a sleep (100ms) but that fixed nothing. Also looked at the amount of traffic the API accepts (10 requests per second, 1.200 per minute, 100.000 per day) , it shouldn't be a problem.
Runtime is limited so i need it to be as efficient as possible. I'm thinking it is an issue of computational power after i pushed all values in the json request into the 'tokens' array. Is there a way to let the script wait as long as necessary for the changes to be committed?
function newGetOrders() {
var starttime = new Date().getTime().toString();
var refreshTime = new Date();
var tokens = retrieveTopBin();
var sheet = SpreadsheetApp.openById('aaafFzbXXRzSi-eXBu9Xh81Ne2r09vM8rLFkA4fY').getSheetByName("Sheet37");
sheet.getRange('A2:OL101').clear();
for (var i=0; i<tokens.length; i++) {
var request = UrlFetchApp.fetch("https://api.binance.com/api/v1/depth?symbol=" + tokens[i][0] + "BTC", {muteHttpExceptions:true});
var json = JSON.parse(request.getContentText());
tokens[i].push(refreshTime);
Utilities.sleep(100);
for (var k in json.bids) {
tokens[i].push(json.bids[k][0]);
tokens[i].push(json.bids[k][1]);
}
for (var k in json.asks) {
tokens[i].push(json.asks[k][0]);
tokens[i].push(json.asks[k][1]);
}
if (tokens[i].length < 402) {
for (var x=tokens[i].length; x<402; x++) {
tokens[i].push("ERROR!");
}
}
}
sheet.getRange(2, 1, tokens.length, 402).setValues(tokens);
}
I'm working on a R&D project where I collect my server side statistics using Linux commands and output the same to my mail. Now my plan is to read and parse the Gmail content which has my data of the server (as below) and extract it to Google Sheets. My Gmail content looks like below which has data in rows and columns.
Date&Time JVM PID CPU MEM FGC
03-09-2017-09-08-PM abc01_xzy01 12345 1.2% 2.75 3
03-09-2017-09-08-PM abc01_xzy01 12345 3.5% 2.71 4
03-09-2017-09-08-PM abc01_xzy01 12345 4.6% 2.79 5
My idea here is to pull exactly the same way into a Google Sheet. I'm using the below code but it's unable to read the content. I'm thinking if it's related to the RegExp used. Could you please tell me how exactly the code has to be written in the if statement.
function parseEmailMessages(start) {
start = start || 0;
var threads = GmailApp.getInboxThreads(start, 100);
var sheet = SpreadsheetApp.getActiveSheet();
for (var i = 0; i < threads.length; i++) {
var tmp,
message = threads[i].getMessages()[0],
// subject = message.getSubject(),
subject = "SERVER TEST REPORT",
content = message.getPlainBody();
if (content) {
tmp = content.match(/Date&Time:\s*([A-Za-z0-9\s]+)(\r?\n)/);
var username = (tmp && tmp[1]) ? tmp[1].trim() : 'No Date & Time';
tmp = content.match(/JVM:\s*([A-Za-z0-9\s]+)(\r?\n)/);
var username = (tmp && tmp[1]) ? tmp[1].trim() : 'No JVM';
sheet.appendRow([username, email, subject, comment]);
}
}
}
My output just prints No Date & Time and No JVM in the Google Sheets. I want to print the names and data in the columns and rows as given in the mail. Can someone please help me on this and tell me what is the mistake and how to pull the data like expected. Thanks in advance.
If all that is in your email is what you posted above, this will put it in your spreadsheet. Change the email subject and sheet name to suit your needs.
function getGmail() {
var ss = SpreadsheetApp.getActiveSpreadsheet();
var sheet = ss.getActiveSheet();
var threads = GmailApp.search('IMPORTANT1', 0, 10);
for (var i = 0; i < threads.length; i++) {
var messages = GmailApp.getMessagesForThread(threads[i]);
for (var j = 0; j < messages.length; j++) {
var msg=messages[j].getPlainBody();
var msg=msg.trim()
}
}
result1(msg)
}
function result1(range) {
var ss = SpreadsheetApp.getActiveSpreadsheet();
var sheet1 = ss.getSheetByName("Sheet1")
var lr=sheet1.getLastRow()
var output=[]
var line=range.split("\n")
for(j=0;j<line.length;j++){
output.push(line[j].split(" "))
}
sheet1.getRange(lr+1, 1, output.length, output[0].length).setValues(output)
}