We have a private harbor registry that's insecure. We use docker client on a centos7 VM to push /pull images. We lost the docker client centos7 VM so have installed a new one. The issue I see is I log into the registry but when I do "docker image list" or "docker images" it doesn't show the images previously loaded. I'm not sure why?
[udmuser1#vtc-spk-auto10 ~]$ docker image list
REPOSITORY TAG IMAGE ID CREATED SIZE
If I do a docker load -i image on the new linux VM then docker push I do see the image when doing "docker image list" on the registry.
[udmuser1#vtc-spk-auto10 ~]$ docker image list
REPOSITORY TAG IMAGE ID CREATED SIZE
harbor01.ims.net/library/f5-fluentd v1.4.2 b96d9e18a71c 9 months ago 495 MB
I'm unclear why I don't see the images that were loaded by the previous linux VM.
Thanks for any input on this.
John
Your local Docker client would show you images that are part of its docker daemon in other words the images present on your client. You would need to setup synchronization if you want similar images on both the ends.
The container Registry is a place where you push/pull images to and from.
Your local Docker Client contains only the images that fulfil the criteria:
The image was pulled from a registry
The image was build (on that machine)
The container images you are not synchronized with your registry, you need to explicitly push and pull those images.
Your private repository and local machine are two different things. You can't get to the images in your private repository if you lose access to it.
To list all image repositories that contain at least one tagged image, run this curl command:
curl https://registry.io/v2/_catalog
{"repositories":["alpine","postgres"]}
If there are image repositories in a registry that don't possess a single tag, and instead only possess digests e.g. ubuntu#sha256:ac13c5d2, those will be omitted from the output. If a registry contained ubuntu#sha256:ac13c5d2, alpine:latest, and postgres:15.1, Output from /v2/_catalog would read as {"repositories":["alpine","postgres"]}.
Images can be obtained in a more granular and complete method through use of:
https://registry.io/v2/{image}/manifests/{digest} for images with digests
https://registry.io/v2/{image}/tags/list for images with tags
Related
I have 2 hosts running the same docker customized image. I have modified the image on host 1 and saved the image to a custom.tar. If I take that image and load it onto host 2 will it just update or should I remove the old docker image first?
There are 2 ways to do that with repository and without repository using load and save.
With repository below are the steps.
Log in on Docker Hub
Click on Create Repository.
Choose a name and a description for your repository and click
Create.
Log into the Docker Hub from the command line
docker login --username=yourhubusername --email=youremail#company.com
tag your image
docker tag <existing-image> <hub-user>/<repo-name>[:<tag>]
Push your image to the repository you created
docker push <hub-user>/<repo-name>:<tag>
Pull the image to host 2
docker pull <hub-user>/<repo-name>:<tag>
This will add the image to docker hub and available on internet and now you can pull this image to any system.
With this approach you can keep the same images with different tags on system. But if you don't need old images better to delete that to avoid junk.
Without docker hub.
This command will create tar bundle.
docker save [OPTIONS] IMAGE [IMAGE...]
example: docker save busybox > busybox.tar
Load an image from a tar archive or STDIN
docker load [OPTIONS]
example:docker load < busybox.tar.gz
Recommended: Docker hub or DTR approach easy to manage unless you have bandwidth issue in case your file is large.
Refer:
Docker Hub Repositories
I have something on my mind that is bugging me. When running docker images I see a list of my local images I have in my docker environment. When pulling Images I pull it from a registry and more specific pull the specified tag managed by the repository.
so there is the registry as the big hub to store all image
repositories
and the repository is storing commits/tagged versions of a specific image
But what is docker images then? It's a registry as well isn't it? It holds all images that I've built locally or pulled.
If my claim is valid:
How does it comply with running a private registry (mentioned here https://docs.docker.com/registry/deploying/)
Running this docker run -d -p 5000:5000 --restart=always --name registry registry:2
Would deploy this new registry into my docker images...
So now I have a registry within my registry... registception?
What is the difference besides the custom registry is deployable?
Its not a local image registry as other questions have pointed. It is an image cache. The purpose of the image cache is to avoid having every time to download the same image whenever you do a docker run.
docker images simply lists all the cached images on the machine. Whenever there is newer image on the registry, the image(some layers) are downloaded and cached when doing docker pull .... Also, when a layer exists in the local cache, docker tells you that, example:
Step 2/2 : CMD /bin/bash
---> Using cache
On the other hand, a docker registry is a central repository to store images. It provide a remote api to pull and push images. The local image cache does not have this feature. Images in the local cache are read and stored used local docker commands that simply read files under /var/lib/docker/...
To make things clear, think of Docker remote registries (such as Docker Hub) as the remote Git repositories. You pull Docker images (like git repositories) that you need and you play with it.
Like remote Git repositories such as GitHub\BitBucket, Docker registries are also public and private. Public registries are for public usage and open-source projects. Examples include in like Docker Hub. Where as private registries are for organizational use or for your own. Examples for private registries include Azure Container Registry, EC2 Container Registry etc.
The official Docker Registry image is just a Docker registry image for your own system, you can't share them with others unless you have a server or a public Internet IP address. Think of it as Bonobo Private Git Server for Windows.
Your local image registry as you mentioned are all those images that you have build locally or pulled from a registry public or private you can see it like a local cache of images that you can re use without download or rebuild each time.
Running the registry what actually does is to spin up a server that implements the Docker Registry API which allows users to push, pull, delete and handles the storage of this images and their layers. See it like a central repository like npm, nexus
For example if you run the registry in your.registry.com:5000
You can do things like
docker build -t your.registry.com:5000/my-image:tag .
docker push your.registry.com:5000/my-image:tag
So others that have access to your server can pull it
docker pull your.registry.com:5000/my-image:tag
I'm confused as to the difference between docker registries and repositories. It seems like the Docker documentation uses the two words interchangeably. Also, repositories are sometimes referred to as images, such as this from their docs:
In order to push a repository to its registry, you need to have named
an image or committed your container to a named image as we saw here.
Now you can push this repository to the registry designated by its
name or tag.
How can you push a repository to a registry? Aren't you pushing the image to the repository?
Docker registry is a service that is storing your docker images.
Docker registry could be hosted by a third party, as public or private registry, like one of the following registries:
Docker Hub,
Quay,
Google Container Registry,
AWS Container Registry
or you can host the docker registry by yourself
(see https://docs.docker.com/ee/dtr/ for more details).
Docker repository is a collection of different docker images with same name, that have different tags. Tag is alphanumeric identifier of the image within a repository.
For example see https://hub.docker.com/r/library/python/tags/. There are many different tags for the official python image, these tags are all members of the official python repository on the Docker Hub. Docker Hub is a Docker Registry hosted by Docker.
To find out more read:
https://docs.docker.com/registry/
https://github.com/docker/distribution
From the book Using Docker, Developing and deploying Software with Containers
Registries, Repositories, Images, and Tags
There is a hierarchical system for storing images.
The following terminology is used:
Registry
A service responsible for hosting and distributing images. The default registry is the Docker Hub.
Repository
A collection of related images (usually providing different versions of the same application or service).
Tag
An alphanumeric identifier attached to images within a repository (e.g., 14.04 or stable ).
So the command docker pull amouat/revealjs:latest will download the image tagged latest within the amouat/revealjs repository from the Docker Hub registry.
Complementing the information:
You usually push a repository to a registry (and all images that are part of it). But you can push a single image to a registry. In all cases, you use docker push.
An image has a 12-hex-digit Image ID, but is also identified by: namespace/repo-name:tag
The image full name can be optionally prefixed by the registry host name and port: myregistryhost:5000/namespace/repo-name:tag
A common naming convention is to use your registry user-name as what I called "namespace".
A docker repository is a cute combination of registry and image.
docker tag foo <registry>/<image>:<tag>
is the same as
docker tag foo <repository>:<tag>
Docker Registry is a service, which you can either host yourself (Trusted and Private) or you can let docker hub be the host for this service. Usually, if your software is commercial, you will have hosted this as a "Private and Trusted" registry. For Java Developers, this is somewhat analogous to Maven Artifactory setup.
Docker Repository is a set of "Tagged" images. An example is that you might have tagged 5 of ubuntu:latest images:
a) Nano editor (image1_tag:v1)
b) A specific software 1 (image1_tag:v2)
c) Sudo (image1_tag:v3)
d) apache http daemon (image1_tag:v4)
e) tomcat (image1_tag:v5)
You can use docker push command to push each of the above images to your repository. As long as the repository names match, they will be pushed successfully, and appear under your chosen repository and correctly tagged.
Now, your question is, "So where is this repository hosted/who is managing the service"? That is where Docker Registry comes into picture. By default you will get a docker hub registry (Open Source) which you can use to keep your private/public repository. So without any modification, your images will be pushed to your private repository in docker hub. An example output when you pushing your image tags are the following:
docker#my-docker-vm:/$ docker push mydockerhub/my-helloworld-repo:my_tag
The push refers to repository [docker.io/mydockerhub/my-helloworld-repo]
bf41e934d39d: Pushed
70d93396f87f: Pushed
6ec525dfd060: Pushed
705419d10b13: Pushed
a4aaef726d02: Pushed
04964fddc946: Pushed
latest: digest: sha256:eb93c92351bce785aa3ec0de489cfeeaafd55b7d90adf95ecea02629b376e577 size: 1571
docker#my-docker-vm:/$
And if you type immediately docker images --digests -a you can confirm that your pushed image tags are now showing new signature against the private repository managed by docker hub registry.
A Docker image registry is the place to store all your Docker images. The image registry allows you to push and pull the container images as needed.
Registries can be private or public. When the registry is public, the images are shared with the whole world whereas in the private registry the images are shared only amongst the members of an enterprise or a team.
A registry makes it possible for the Docker daemon to easily pull and run your Docker images.
Docker Hub and other third party repository hosting services are called “registries”. A registry stores a collection of repositories.
As a registry can have many repositories and a repository can have many different versions of the same image which are individually versioned with tags.
The confusion starts with this definition of a tag: "An alphanumeric identifier attached to images in a repository"
I'd rather call that alphanumeric identifier that you append with a ':' a tag-suffix for now. When somebody says "'latest' is the default tag", then this kind of tag-suffix is meant.
In reality, the :latest' suffix is technically part of the tag. The entire name is a tag. All these are tags (possibly referring to the same image):
myimagename
myimagename:latest
username/theirimagename:1.0
myrepo:5000/username/imagename:1.0
(I say imagename here, just to illustrate the other main source of confusion. That's the repositoryname, of course. Sorry.)
Examples:
a) When you want to name your image while building, you use docker build -t thisname ... -- that is -t for tag, (not -n for name).
b) When you want to push that image to a registry, you need to have the full URL (starting with registryname and ending with a tag-suffix) as a tag:
docker tag thisname mylocalregistry:5000/username/repoimagething:1.0
Now you push the image known as thisname by saying:
docker push mylocalregistry:5000/username/repoimagething:1.0
Naming things is hard.
Alas! A repository is not a "container" (aaargh...) where you put things in, that is what muggles think...
I was wondering if there was a way to clone images from a local server.
The servers running containers will be hosted behind a bandwidth constrained connection. It would be great if there was a way to pull given containers for one server and then pull from that initial local server to update the containers on the remaining servers.
You could pull those images you want, give hem a new tag, and put them in your own registry.
For instance, let's say you pulled down the official registry image and stood it up at myregistry.internal.mycompany.com. Now, if you wanted to have a CentOS image available for all of your servers but didn't want to pull them all from the official repo (incurring the bandwitch charges) then you could pull a CentOS image (let's say centos:latest - docker pull centos) and then give that image a new tag, like this:
docker tag centos:latest myregistry.internal.mycompany.com/centos:latest
Now from your other servers you just pull 'myregistry.internal.mycompany.com/centos:latest'
Setting up your own repo is really easy as a docker container itself. You can pull the image and learn more at https://registry.hub.docker.com/_/registry/
I think you have a few options. If what you actually want to manage is images rather than containers:
You could set up a private Docker registry, and then push to/pull from that local repository. This may ultimately be the easiest if that is something that you want to do fairly often, because you're just using standard docker push/docker pull commands.
You could use docker save to save images on one server and docker load to load the images on another server.
If you are actually trying to move containers around:
You could use docker export on one server and docker import on another server.
I'm wondering where Docker's images are exactly stored to in my local host machine.
Can I share my Docker-Image without using the Docker-Hub or a Dockerfile but the 'real' Docker-Image? And what is exactly happening when I 'push' my Docker-Image to Docker-Hub?
Docker images are stored as filesystem layers. Every command in the Dockerfile creates a layer. You can also create layers by using docker commit from the command line after making some changes (via docker run probably).
These layers are stored by default under /var/lib/docker. While you could (theoretically) cherry pick files from there and install it in a different docker server, is probably a bad idea to play with the internal representation used by Docker.
When you push your image, these layers are sent to the registry (the docker hub registry, by default… unless you tag your image with another registry prefix) and stored there. When pulling, the layer id is used to check if you already have the layer locally or it needs to be downloaded. You can use docker history to peek at which layers (other images) are used (and, to some extent, which command created the layer).
As for options to share an image without pushing to the docker hub registry, your best options are:
docker save an image or docker export a container. This will output a tar file to standard output, so you will like to do something like docker save 'dockerizeit/agent' > dk.agent.latest.tar. Then you can use docker load or docker import in a different host.
Host your own private registry. - Outdated, see comments See the docker registry image. We have built an s3 backed registry which you can start and stop as needed (all state is kept on the s3 bucket of your choice) which is trivial to setup. This is also an interesting way of watching what happens when pushing to a registry
Use another registry like quay.io (I haven't personally tried it), although whatever concerns you have with the docker hub will probably apply here too.
Based on this blog, one could share a docker image without a docker registry by executing:
docker save --output latestversion-1.0.0.tar dockerregistry/latestversion:1.0.0
Once this command has been completed, one could copy the image to a server and import it as follows:
docker load --input latestversion-1.0.0.tar
Sending a docker image to a remote server can be done in 3 simple steps:
Locally, save docker image as a .tar:
docker save -o <path for created tar file> <image name>
Locally, use scp to transfer .tar to remote
On remote server, load image into docker:
docker load -i <path to docker image tar file>
[Update]
More recently, there is Amazon AWS ECR (Elastic Container Registry), which provides a Docker image registry to which you can control access by means of the AWS IAM access management service. ECR can also run a CVE (vulnerabilities) check on your image when you push it.
Once you create your ECR, and obtain the "URL" you can push and pull as required, subject to the permissions you create: hence making it private or public as you wish.
Pricing is by amount of data stored, and data transfer costs.
https://aws.amazon.com/ecr/
[Original answer]
If you do not want to use the Docker Hub itself, you can host your own Docker repository under Artifactory by JFrog:
https://www.jfrog.com/confluence/display/RTF/Docker+Repositories
which will then run on your own server(s).
Other hosting suppliers are available, eg CoreOS:
http://www.theregister.co.uk/2014/10/30/coreos_enterprise_registry/
which bought quay.io