I have been trying to compile my latex code in overleaf.com, but it keeps giving the errors as follows, and it does not point in which line of the code the error is located in:
It seems like a font issue there and here is the raw log of the error:
{/usr/local/texlive/2021/texmf-dist/fonts/enc/dvips/ly1/texnansi.enc}
! error: (type 1): cannot open file for reading 'ugmm8a.pfb'
! ==> Fatal error occurred, no output PDF file produced!
I need to solve this error to get my output document.
The urw-garamond fonts works just fine with texlive2021, you just need the ugmr8a.pfb from https://www.ctan.org/tex-archive/fonts/urw/garamond
https://www.overleaf.com/read/cmvfrqrkrnrq
(... however it might give better results not to use such a legacy font if you're already using lualatex, overleaf has many good fonts installed https://www.overleaf.com/learn/latex/Questions/Which_OTF_or_TTF_fonts_are_supported_via_fontspec%3F)
I have found the solution to this problem by myself.
Turns out the solution was just to change the Compiler (TeX Live) version of the overleaf.com project from 2021 to 2016 (since the 'ugmm8a.pfb' font got depreciated in the later version).
Hence I had to press the Menu option in the Top Left of my project, and then change the "TeX Live version" from 2021 to 2016 as shown in the screenshot below:
And after this one change when I recompiled, my document was successfully outputted without any errors.
As an additional info to people who are facing similar issues check this post by overleaf.com on how to add new fonts that do not exist on their server to your project: https://www.overleaf.com/learn/latex/XeLaTeX#Using_fonts_not_installed_on_Overleaf.27s_servers:_Google_Fonts_example
Related
i´m working on rmardown, i´m trying to compile in pdf, but the console show me an error.
! Package inputenc Error: Unicode character ^^S (U+0013)
(inputenc) not set up for use with LaTeX.
Try other LaTeX engines instead (e.g., xelatex) if you are using pdflatex. See https://bookdown.org/yihui/rmarkdown-cookbook/latex-unicode.html
Error: LaTeX failed to compile Modelos-de-volatilidad.tex. See https://yihui.org/tinytex/r/#debugging for debugging tips. See Modelos-de-volatilidad.log for more info.
Ejecución interrumpida
i have install MIKTEX.
Check for the error in the line where it is happening. There's surely one character that LaTeX is not processing. Comment or cut the line and run again. I have had a similar issue when copy pasting from a pdf into LaTeX.
I am trying to complete a paper in latex downloaded from an online template.
there shows an error while compiling:
This is BibTeX, Version 0.99d (MiKTeX 21.6)
The top-level auxiliary file: Islam2021.aux
I couldn't open style file IEEEbib.bst
---line 69 of file Islam2021.aux
: \bibstyle{IEEEbib
: }
I'm skipping whatever remains of this command
I found no style file---while reading file Islam2021.aux
(There were 2 error messages)
Process exited with error(s)
How can I fix this?
IEEEbib.bst is not a default style include in tex distributions. Either you can download it from wherever you have your online template from or you could try your luck with a random version of the file from somewhere on the internet, e.g.
https://2021.ieeeicassp.org/Papers/PaperFormat/IEEEbib.bst
(this might be a different version and might give different results ...)
I'm using tesseract to detect text in spanish in some screenshot of a game, I had some issues with the "spa.traineddata" so I started to train my own data called "spa1.traineddata" and I used the two files to make text detection more accurate, yesterday I make some tests and seemed to work well, but the file "spa1.traineddata" needed more training, so I decided to continue today, I added some new images to train my file "spa1.trainneddata" and then I wanted to test it and throws me the following error
pytesseract.pytesseract.TesseractError: (1, 'Error opening data file C:\\Program Files\\Tesseract-OCR/tessdata/-l spa.traineddata Please make sure the TESSDATA_PREFIX environment variable is set to your "tessdata" directory. Failed loading language \'-l spa\' Error opening data file /home/debian/src/github/tesseract-ocr/tesseract/bin/ndebug/x86_64-w64-mingw32-5.0.0-alpha.20200223/usr/x86_64-w64-mingw32/share/tessdata/spa1 --psm
6.traineddata Please make sure the TESSDATA_PREFIX environment variable is set to your "tessdata" directory. Failed loading language \'spa1 --psm 6\' Tesseract couldn\'t load any languages! Could not initialize tesseract.')
and these are the lines of code that I use for testing
custom_config = r'-l spa+spa1 --psm 6'
pytesseract.image_to_string(Image.open('imagenes/obv.png'), lang=custom_config)
I was searching and found that the error was because the lang.traideddata files were not in the tessdata folder, but mine are in the folder (That's why I was able to work with them yesterday)
I attach a screenshot of the tessdata folder, the last two files are the traineddata
tessdata folder
also, it is useful I'm using vscode, python 3.7 and tesseract 4
I hope you can help me (sorry my bad english uwu)
I would like to ask how to write some Chinese characters (simplified) within an English Latex document? I followed some methods suggested online but none of them are working for me. I am using Texworks to compile my document (pdfLatex).
\usepackage{CJKutf8}
\documentclass{article}
\usepackage{CJKutf8}
\begin{document}
\begin{CJK}{UTF8}{bsmi}
你好吗
\end{CJK}
\end{document}
another method is mentioned here,
\usepackage{CJKutf8}
\newcommand{\zh}[1]{\begin{CJK}{UTF8}{gbsn}#1\end{CJK}}
insert whatever Chinese characters you like into the document by typing
\zh{中文}
The error I receive is as following when using the method of CJKutf8 with pdfLaTeX mentioned here,
The log file hopefully contains the information to get MiKTeX going again:
C:\Users\muhd_\AppData\Local\MiKTeX\2.9\miktex\log\miktex-makepk.log
)
!pdfTeX error: miktex-pdftex.exe (file bsmiu30): Font bsmiu30 at 600 not found
==> Fatal error occurred, no output PDF file produced!
Log file is attached here.
The first error in the log file
The process terminated due to an access violation.
suggests that there are some problems with permissions while trying to create the necessary files to use the font for the Chinese letters.
Based on this answer https://tex.stackexchange.com/a/419809/36296 the problem can be fixed by either runing updmap from the command line or Refresh font map files from within the miktex console (in user mode).
I configure the ARToolKit5 right in win10,and then I start a project by the ARToolKit5 source example.
I include all the headers and libraries it used,and input the dynamic libraries . It still produce link error 2019 and link error 2001.
I try a lot use the other methods,but still the same result!
Error:
Please tell me how to solve,thanks a lot!