Related
I have a name spaced class..
"CommonCar::RedTrunk"
I need to convert it to an underscored string "common_car_red_trunk", but when I use
"CommonCar::RedTrunk".underscore, I get "common_car/red_trunk" instead.
Is there another method to accomplish what I need?
Solutions:
"CommonCar::RedTrunk".gsub(':', '').underscore
or:
"CommonCar::RedTrunk".sub('::', '').underscore
or:
"CommonCar::RedTrunk".tr(':', '').underscore
Alternate:
Or turn any of these around and do the underscore() first, followed by whatever method you want to use to replace "/" with "_".
Explanation:
While all of these methods look basically the same, there are subtle differences that can be very impactful.
In short:
gsub() – uses a regex to do pattern matching, therefore, it's finding any occurrence of ":" and replacing it with "".
sub() – uses a regex to do pattern matching, similarly to gsub(), with the exception that it's only finding the first occurrence (the "g" in gsub() meaning "global"). This is why when using that method, it was necessary to use "::", otherwise a single ":" would have been left. Keep in mind with this method, it will only work with a single-nested namespace. Meaning "CommonCar::RedTrunk::BigWheels" would have been transformed to "CommonCarRedTrunk::BigWheels".
tr() – uses the string parameters as arrays of single character replacments. In this case, because we're only replacing a single character, it'll work identically to gsub(). However, if you wanted to replace "on" with "EX", for example, gsub("on", "EX") would produce "CommEXCar::RedTrunk" while tr("on", "EX") would produce "CEmmEXCar::RedTruXk".
Docs:
https://apidock.com/ruby/String/gsub
https://apidock.com/ruby/String/sub
https://apidock.com/ruby/String/tr
This is a pure-Ruby solution.
r = /(?<=[a-z])(?=[A-Z])|::/
"CommonCar::RedTrunk".gsub(r, '_').downcase
#=> "common_car_red_trunk"
See (the first form of) String#gsub and String#downcase.
The regular expression can be made self-documenting by writing it in free-spacing mode:
r = /
(?<=[a-z]) # assert that the previous character is lower-case
(?=[A-Z]) # assert that the following character is upper-case
| # or
:: # match '::'
/x # free-spacing regex definition mode
(?<=[a-z]) is a positive lookbehind; (?=[A-Z]) is a positive lookahead.
Note that /(?<=[a-z])(?=[A-Z])/ matches an empty ("zero-width") string. r matches, for example, the empty string between 'Common' and 'Car', because it is preceeded by a lower-case letter and followed by an upper-case letter.
I don't know Rails but I'm guessing you could write
"CommonCar::RedTrunk".delete(':').underscore
https://regex101.com/r/sB9wW6/1
(?:(?<=\s)|^)#(\S+) <-- the problem in positive lookbehind
Working like this on prod: (?:\s|^)#(\S+), but I need a correct start index (without space).
Here is in JS:
var regex = new RegExp(/(?:(?<=\s)|^)#(\S+)/g);
Error parsing regular expression: Invalid regular expression:
/(?:(?<=\s)|^)#(\S+)/
What am I doing wrong?
UPDATE
Ok, no lookbehind in JS :(
But anyways, I need a regex to get the proper start and end index of my match. Without leading space.
Make sure you always select the right regex engine at regex101.com. See an issue that occurred due to using a JS-only compatible regex with [^] construct in Python.
JS regex - at the time of answering this question - did not support lookbehinds. Now, it becomes more and more adopted after its introduction in ECMAScript 2018. You do not really need it here since you can use capturing groups:
var re = /(?:\s|^)#(\S+)/g;
var str = 's #vln1\n#vln2\n';
var res = [];
while ((m = re.exec(str)) !== null) {
res.push(m[1]);
}
console.log(res);
The (?:\s|^)#(\S+) matches a whitespace or the start of string with (?:\s|^), then matches #, and then matches and captures into Group 1 one or more non-whitespace chars with (\S+).
To get the start/end indices, use
var re = /(\s|^)#\S+/g;
var str = 's #vln1\n#vln2\n';
var pos = [];
while ((m = re.exec(str)) !== null) {
pos.push([m.index+m[1].length, m.index+m[0].length]);
}
console.log(pos);
BONUS
My regex works at regex101.com, but not in...
First of all, have you checked the Code Generator link in the Tools pane on the left?
All languages - "Literal string" vs. "String literal" alert - Make sure you test against the same text used in code, literal string, at the regex tester. A common scenario is copy/pasting a string literal value directly into the test string field, with all string escape sequences like \n (line feed char), \r (carriage return), \t (tab char). See Regex_search c++, for example. Mind that they must be replaced with their literal counterparts. So, if you have in Python text = "Text\n\n abc", you must use Text, two line breaks, abc in the regex tester text field. Text.*?abc will never match it although you might think it "works". Yes, . does not always match line break chars, see How do I match any character across multiple lines in a regular expression?
All languages - Backslash alert - Make sure you correctly use a backslash in your string literal, in most languages, in regular string literals, use double backslash, i.e. \d used at regex101.com must written as \\d. In raw string literals, use a single backslash, same as at regex101. Escaping word boundary is very important, since, in many languages (C#, Python, Java, JavaScript, Ruby, etc.), "\b" is used to define a BACKSPACE char, i.e. it is a valid string escape sequence. PHP does not support \b string escape sequence, so "/\b/" = '/\b/' there.
All languages - Default flags - Global and Multiline - Note that by default m and g flags are enabled at regex101.com. So, if you use ^ and $, they will match at the start and end of lines correspondingly. If you need the same behavior in your code check how multiline mode is implemented and either use a specific flag, or - if supported - use an inline (?m) embedded (inline) modifier. The g flag enables multiple occurrence matching, it is often implemented using specific functions/methods. Check your language reference to find the appropriate one.
line-breaks - Line endings at regex101.com are LF only, you can't test strings with CRLF endings, see regex101.com VS myserver - different results. Solutions can be different for each regex library: either use \R (PCRE, Java, Ruby) or some kind of \v (Boost, PCRE), \r?\n, (?:\r\n?|\n)/(?>\r\n?|\n) (good for .NET) or [\r\n]+ in other libraries (see answers for C#, PHP). Another issue related to the fact that you test your regex against a multiline string (not a list of standalone strings/lines) is that your patterns may consume the end of line, \n, char with negated character classes, see an issue like that. \D matched the end of line char, and in order to avoid it, [^\d\n] could be used, or other alternatives.
php - You are dealing with Unicode strings, or want shorthand character classes to match Unicode characters, too (e.g. \w+ to match Стрибижев or Stribiżew, or \s+ to match hard spaces), then you need to use u modifier, see preg_match() returns 0 although regex testers work - To match all occurrences, use preg_match_all, not preg_match with /...pattern.../g, see PHP preg_match to find multiple occurrences and "Unknown modifier 'g' in..." when using preg_match in PHP?- Your regex with inline backreference like \1 refuses to work? Are you using a double quoted string literal? Use a single-quoted one, see Backreference does not work in PHP
phplaravel - Mind you need the regex delimiters around the pattern, see https://stackoverflow.com/questions/22430529
python - Note that re.search, re.match, re.fullmatch, re.findall and re.finditer accept the regex as the first argument, and the input string as the second argument. Not re.findall("test 200 300", r"\d+"), but re.findall(r"\d+", "test 200 300"). If you test at regex101.com, please check the "Code Generator" page. - You used re.match that only searches for a match at the start of the string, use re.search: Regex works fine on Pythex, but not in Python - If the regex contains capturing group(s), re.findall returns a list of captures/capture tuples. Either use non-capturing groups, or re.finditer, or remove redundant capturing groups, see re.findall behaves weird - If you used ^ in the pattern to denote start of a line, not start of the whole string, or used $ to denote the end of a line and not a string, pass re.M or re.MULTILINE flag to re method, see Using ^ to match beginning of line in Python regex
- If you try to match some text across multiple lines, and use re.DOTALL or re.S, or [\s\S]* / [\s\S]*?, and still nothing works, check if you read the file line by line, say, with for line in file:. You must pass the whole file contents as the input to the regex method, see Getting Everything Between Two Characters Across New Lines. - Having trouble adding flags to regex and trying something like pattern = r"/abc/gi"? See How to add modifers to regex in python?
c#, .net - .NET regex does not support possessive quantifiers like ++, *+, ??, {1,10}?, see .NET regex matching digits between optional text with possessive quantifer is not working - When you match against a multiline string and use RegexOptions.Multiline option (or inline (?m) modifier) with an $ anchor in the pattern to match entire lines, and get no match in code, you need to add \r? before $, see .Net regex matching $ with the end of the string and not of line, even with multiline enabled - To get multiple matches, use Regex.Matches, not Regex.Match, see RegEx Match multiple times in string - Similar case as above: splitting a string into paragraphs, by a double line break sequence - C# / Regex Pattern works in online testing, but not at runtime - You should remove regex delimiters, i.e. #"/\d+/" must actually look like #"\d+", see Simple and tested online regex containing regex delimiters does not work in C# code - If you unnecessarily used Regex.Escape to escape all characters in a regular expression (like Regex.Escape(#"\d+\.\d+")) you need to remove Regex.Escape, see Regular Expression working in regex tester, but not in c#
dartflutter - Use raw string literal, RegExp(r"\d"), or double backslashes (RegExp("\\d")) - https://stackoverflow.com/questions/59085824
javascript - Double escape backslashes in a RegExp("\\d"): Why do regex constructors need to be double escaped?
- (Negative) lookbehinds unsupported by most browsers: Regex works on browser but not in Node.js - Strings are immutable, assign the .replace result to a var - The .replace() method does change the string in place - Retrieve all matches with str.match(/pat/g) - Regex101 and Js regex search showing different results or, with RegExp#exec, RegEx to extract all matches from string using RegExp.exec- Replace all pattern matches in string: Why does javascript replace only first instance when using replace?
javascriptangular - Double the backslashes if you define a regex with a string literal, or just use a regex literal notation, see https://stackoverflow.com/questions/56097782
java - Word boundary not working? Make sure you use double backslashes, "\\b", see Regex \b word boundary not works - Getting invalid escape sequence exception? Same thing, double backslashes - Java doesn't work with regex \s, says: invalid escape sequence - No match found is bugging you? Run Matcher.find() / Matcher.matches() - Why does my regex work on RegexPlanet and regex101 but not in my code? - .matches() requires a full string match, use .find(): Java Regex pattern that matches in any online tester but doesn't in Eclipse - Access groups using matcher.group(x): Regex not working in Java while working otherwise - Inside a character class, both [ and ] must be escaped - Using square brackets inside character class in Java regex - You should not run matcher.matches() and matcher.find() consecutively, use only if (matcher.matches()) {...} to check if the pattern matches the whole string and then act accordingly, or use if (matcher.find()) to check if there is a single match or while (matcher.find()) to find multiple matches (or Matcher#results()). See Why does my regex work on RegexPlanet and regex101 but not in my code?
scala - Your regex attempts to match several lines, but you read the file line by line (e.g. use for (line <- fSource.getLines))? Read it into a single variable (see matching new line in Scala regex, when reading from file)
kotlin - You have Regex("/^\\d+$/")? Remove the outer slashes, they are regex delimiter chars that are not part of a pattern. See Find one or more word in string using Regex in Kotlin - You expect a partial string match, but .matchEntire requires a full string match? Use .find, see Regex doesn't match in Kotlin
mongodb - Do not enclose /.../ with single/double quotation marks, see mongodb regex doesn't work
c++ - regex_match requires a full string match, use regex_search to find a partial match - Regex not working as expected with C++ regex_match - regex_search finds the first match only. Use sregex_token_iterator or sregex_iterator to get all matches: see What does std::match_results::size return? - When you read a user-defined string using std::string input; std::cin >> input;, note that cin will only get to the first whitespace, to read the whole line properly, use std::getline(std::cin, input); - C++ Regex to match '+' quantifier - "\d" does not work, you need to use "\\d" or R"(\d)" (a raw string literal) - This regex doesn't work in c++ - Make sure the regex is tested against a literal text, not a string literal, see Regex_search c++
go - Double backslashes or use a raw string literal: Regular expression doesn't work in Go - Go regex does not support lookarounds, select the right option (Go) at regex101.com before testing! Regex expression negated set not working golang
groovy - Return all matches: Regex that works on regex101 does not work in Groovy
r - Double escape backslashes in the string literal: "'\w' is an unrecognized escape" in grep - Use perl=TRUE to PCRE engine ((g)sub/(g)regexpr): Why is this regex using lookbehinds invalid in R?
oracle - Greediness of all quantifiers is set by the first quantifier in the regex, see Regex101 vs Oracle Regex (then, you need to make all the quantifiers as greedy as the first one)] - \b does not work? Oracle regex does not support word boundaries at all, use workarounds as shown in Regex matching works on regex tester but not in oracle
firebase - Double escape backslashes, make sure ^ only appears at the start of the pattern and $ is located only at the end (if any), and note you cannot use more than 9 inline backreferences: Firebase Rules Regex Birthday
firebasegoogle-cloud-firestore - In Firestore security rules, the regular expression needs to be passed as a string, which also means it shouldn't be wrapped in / symbols, i.e. use allow create: if docId.matches("^\\d+$").... See https://stackoverflow.com/questions/63243300
google-data-studio - /pattern/g in REGEXP_REPLACE must contain no / regex delimiters and flags (like g) - see How to use Regex to replace square brackets from date field in Google Data Studio?
google-sheets - If you think REGEXEXTRACT does not return full matches, truncates the results, you should check if you have redundant capturing groups in your regex and remove them, or convert the capturing groups to non-capturing by add ?: after the opening (, see Extract url domain root in Google Sheet
sed - Why does my regular expression work in X but not in Y?
word-boundarypcrephp - [[:<:]] and [[:>:]] do not work in the regex tester, although they are valid constructs in PCRE, see https://stackoverflow.com/questions/48670105
snowflake-cloud-data-platform snowflake-sql - If you are writing a stored procedure, and \\d does not work, you need to double them again and use \\\\d, see REGEX conversion of VARCHAR value to DATE in Snowflake stored procedure using RLIKE not consistent.
I need a regular expression able to match everything but a string starting with a specific pattern (specifically index.php and what follows, like index.php?id=2342343).
Regex: match everything but:
a string starting with a specific pattern (e.g. any - empty, too - string not starting with foo):
Lookahead-based solution for NFAs:
^(?!foo).*$
^(?!foo)
Negated character class based solution for regex engines not supporting lookarounds:
^(([^f].{2}|.[^o].|.{2}[^o]).*|.{0,2})$
^([^f].{2}|.[^o].|.{2}[^o])|^.{0,2}$
a string ending with a specific pattern (say, no world. at the end):
Lookbehind-based solution:
(?<!world\.)$
^.*(?<!world\.)$
Lookahead solution:
^(?!.*world\.$).*
^(?!.*world\.$)
POSIX workaround:
^(.*([^w].{5}|.[^o].{4}|.{2}[^r].{3}|.{3}[^l].{2}|.{4}[^d].|.{5}[^.])|.{0,5})$
([^w].{5}|.[^o].{4}|.{2}[^r].{3}|.{3}[^l].{2}|.{4}[^d].|.{5}[^.]$|^.{0,5})$
a string containing specific text (say, not match a string having foo):
Lookaround-based solution:
^(?!.*foo)
^(?!.*foo).*$
POSIX workaround:
Use the online regex generator at www.formauri.es/personal/pgimeno/misc/non-match-regex
a string containing specific character (say, avoid matching a string having a | symbol):
^[^|]*$
a string equal to some string (say, not equal to foo):
Lookaround-based:
^(?!foo$)
^(?!foo$).*$
POSIX:
^(.{0,2}|.{4,}|[^f]..|.[^o].|..[^o])$
a sequence of characters:
PCRE (match any text but cat): /cat(*SKIP)(*FAIL)|[^c]*(?:c(?!at)[^c]*)*/i or /cat(*SKIP)(*FAIL)|(?:(?!cat).)+/is
Other engines allowing lookarounds: (cat)|[^c]*(?:c(?!at)[^c]*)* (or (?s)(cat)|(?:(?!cat).)*, or (cat)|[^c]+(?:c(?!at)[^c]*)*|(?:c(?!at)[^c]*)+[^c]*) and then check with language means: if Group 1 matched, it is not what we need, else, grab the match value if not empty
a certain single character or a set of characters:
Use a negated character class: [^a-z]+ (any char other than a lowercase ASCII letter)
Matching any char(s) but |: [^|]+
Demo note: the newline \n is used inside negated character classes in demos to avoid match overflow to the neighboring line(s). They are not necessary when testing individual strings.
Anchor note: In many languages, use \A to define the unambiguous start of string, and \z (in Python, it is \Z, in JavaScript, $ is OK) to define the very end of the string.
Dot note: In many flavors (but not POSIX, TRE, TCL), . matches any char but a newline char. Make sure you use a corresponding DOTALL modifier (/s in PCRE/Boost/.NET/Python/Java and /m in Ruby) for the . to match any char including a newline.
Backslash note: In languages where you have to declare patterns with C strings allowing escape sequences (like \n for a newline), you need to double the backslashes escaping special characters so that the engine could treat them as literal characters (e.g. in Java, world\. will be declared as "world\\.", or use a character class: "world[.]"). Use raw string literals (Python r'\bworld\b'), C# verbatim string literals #"world\.", or slashy strings/regex literal notations like /world\./.
You could use a negative lookahead from the start, e.g., ^(?!foo).*$ shouldn't match anything starting with foo.
You can put a ^ in the beginning of a character set to match anything but those characters.
[^=]*
will match everything but =
Just match /^index\.php/, and then reject whatever matches it.
In Python:
>>> import re
>>> p='^(?!index\.php\?[0-9]+).*$'
>>> s1='index.php?12345'
>>> re.match(p,s1)
>>> s2='index.html?12345'
>>> re.match(p,s2)
<_sre.SRE_Match object at 0xb7d65fa8>
Came across this thread after a long search. I had this problem for multiple searches and replace of some occurrences. But the pattern I used was matching till the end. Example below
import re
text = "start![image]xxx(xx.png) yyy xx![image]xxx(xxx.png) end"
replaced_text = re.sub(r'!\[image\](.*)\(.*\.png\)', '*', text)
print(replaced_text)
gave
start* end
Basically, the regex was matching from the first ![image] to the last .png, swallowing the middle yyy
Used the method posted above https://stackoverflow.com/a/17761124/429476 by Firish to break the match between the occurrence. Here the space is not matched; as the words are separated by space.
replaced_text = re.sub(r'!\[image\]([^ ]*)\([^ ]*\.png\)', '*', text)
and got what I wanted
start* yyy xx* end
So given a string like this "\"turkey AND ham\" NOT \"roast beef\"" I need to get an array with the inner strings like so: ["turkey AND ham", "roast beef"] and eliminate OR's, AND's and NOT's that may or may not be there.
With the help of Rubular I came up with this regex /\\["']([^"']*)\\["']/
which returns the following 2 groups:
Match 1
1. turkey AND ham
Match 2
1. roast beef
however when I use it with .scan keep getting and empty array.
I looked at this and this other SO posts, and a few others, but can not figure out where I am going wrong
Here is the result from my rails console:
=> q = "\"turkey and ham\" OR \"roast beef\""
=> q.scan(/\\["']([^"']*)\\["']/)
=> []
Expectation:
["turkey AND ham", "roast beef"]
I shall also mention I suck at regex.
When the regex used with scan contains a capture group (#davidhu2000's approach), one generally can use lookarounds1 instead. It's just a matter of personal preference. To allow for double-quoted strings that contain either single- or (escaped) double-quoted strings, you could use the following regex.
r = /
(?<=") # match a double quote in a positive lookbehind
[^"]+ # match one or more characters that are not double-quotes
(?=") # match a double quote in a positive lookahead
| # or
(?<=') # match a single quote in a positive lookbehind
[^']+ # match one or more characters that are not single-quotes
(?=') # match a single quote in a positive lookahead
/x # free-spacing regex definition mode
"\"turkey AND ham\" NOT 'roast beef'".scan(r)
#=> ["turkey AND ham", "roast beef"]
As '"turkey AND ham" NOT "roast beef"' #=> "\"turkey AND ham\" NOT \"roast beef\"" (i.e., how the single-quoted string is saved), we need not be concerned about that being an additional case to deal with.
1 For any in the audience who still consider regular expressions to be black magic, there are four kinds of lookarounds (positive and negative lookbehinds and lookaheads) as elaborated in the doc for Regexp. Sometimes they are regarded as "zero-width" matches as they are not part of the matched text.
You regex is trying to match \, which won't match anything in the string, since the \ existed to escape the double quote, and won't be part of the string.
So if you remove \\ in your regex
res = q.scan(/["']([^"']*)["']/)
This will return a 2d array
res = [["turkey and ham"], ["roast beef"]]
Each inner array is all the matching groups from the regex, so if you have two capture groups in your regex, you will see two items in the inner array.
If you want a simple array, you can run flatten method on the array.
Suppose I have string variables like following:
s1="10$"
s2="10$ I am a student"
s3="10$Good"
s4="10$ Nice weekend!"
As you see above, s2 and s4 have white space(s) after 10$ .
Generally, I would like to have a way to check if a string start with 10$ and have white-space(s) after 10$ . For example, The rule should find s2 and s4 in my above case. how to define such rule to check if a string start with '10$' and have white space(s) after?
What I mean is something like s2.RULE? should return true or false to tell if it is the matched string.
---------- update -------------------
please also tell the solution if 10# is used instead of 10$
You can do this using Regular Expressions (Ruby has Perl-style regular expressions, to be exact).
# For ease of demonstration, I've moved your strings into an array
strings = [
"10$",
"10$ I am a student",
"10$Good",
"10$ Nice weekend!"
]
p strings.find_all { |s| s =~ /\A10\$[ \t]+/ }
The regular expression breaks down like this:
The / at the beginning and the end tell Ruby that everything in between is part of the regular expression
\A matches the beginning of a string
The 10 is matched verbatim
\$ means to match a $ verbatim. We need to escape it since $ has a special meaning in regular expressions.
[ \t]+ means "match at least one blank and/or tab"
So this regular expressions says "Match every string that starts with 10$ followed by at least one blank or tab character". Using the =~ you can test strings in Ruby against this expression. =~ will return a non-nil value, which evaluates to true if used in a conditional like if.
Edit: Updated white space matching as per Asmageddon's suggestion.
this works:
"10$ " =~ /^10\$ +/
and returns either nil when false or 0 when true. Thanks to Ruby's rule, you can use it directly.
Use a regular expression like this one:
/10\$\s+/
EDIT
If you use =~ for matching, note that
The =~ operator returns the character position in the string of the
start of the match
So it might return 0 to denote a match. Only a return of nil means no match.
See for example http://www.regular-expressions.info/ruby.html on a regular expression tutorial for ruby.
If you want to proceed to cases with $ and # then try this regular expression:
/^10[\$#] +/