I have googled and read articles from the community, but I still can't solve this.
This is my job profile, https://community.dremio.com/uploads/short-url/edtC2D5EKmhPJViVSEo4V5RbGAe.zip
I don’t know what “Field with index 0” means which field in the picture, the data source is like the following:
Your 1st field (the field with index 0) has 1 or more values exceeded 32000 bytes, which is Dremio's size limit for a data value.
You probably need to find and exclude that row of value, or try to cast the column to VARCHAR
Related
I Need help to apply data validation by referencing from another column with a specific value.
In the given link for google sheet, I have some data where I need to restrict entry of duplicate data only if value from ColumnA is repeated and in ColumnC value is 1 but if value in ColumnC is 0 and data in ColumnA is repeated it should allow it.
https://docs.google.com/spreadsheets/d/1jIfIrB2RsCIyfk-64iyzNGz91oT82C56TDffVeFGLL0/edit?usp=sharing
Note: I have highlighted the rows which need to fixed using any solution. Solution should not allow data entry in row17 with value 1 in ColumnC as it's already available in row7 with value 1 in ColumnC.
I've created a sheet in your file 'Aresvik solution', but an anonymous user keeps altering your file so I've created another file for you here:
https://docs.google.com/spreadsheets/d/11y1cce5pNRh9KDifzZZg_VmsmWh2xrv4bBDDwM2awa8/copy
Using query, it filters out rows where Col2>1 and Col3=1:
=query({Sheet1!A:C},"where not (Col2>1 and Col3=1)",1)
Not sure what your intention is with 1230A, value 1? If you only want to ignore dupes where status = 1, then try:
=arrayformula(query({Sheet1!A:C,if(Sheet1!C:C=1,countifs(Sheet1!A:A&"-"&Sheet1!C:C,Sheet1!A:A&"-"&Sheet1!C:C),)},"select Col1,Col2,Col3 where Col4 is null or Col4=1",1))
If you want a warning when there is a duplicate status of 1, try this in cell D1:
=arrayformula({"Warning";if(if(Sheet1!C2:C=1,countifs(Sheet1!A2:A&"-"&Sheet1!C2:C,Sheet1!A2:A&"-"&Sheet1!C2:C),)>1,"Issue",)})
I have a query that I need formatted in a particular way, but when I have an 8-character string with a 12-character column name, it pads the column to 12 characters even with Set Heading Off and Set Pagesize 0. Is there a way to display a column such that it will not include the length of the column name when calculating the width to use?
This is not the same as "SQLPlus varchar2 outputs whitespaces", which does not appear to be asking about the case when the column name is longer than the data name - just when the data appears to have an excessive length.
I have set of columns that I am attempting to calculate the combined total of those columns then subtract from that total 8, if the difference after 8 is equal to or less than 0 I want to only show zero in the column I am doing this formula in. For those who might ask, I am using the ARRAYFORUMLA cause I want this calculation to repeat as I add new rows, keeping the totals I am seeking on the same row as the calculation is being done onto. So far I have most of this working. Well up to the IF ELSE THEN type of portion. My attempt is/was
=if(LTE((B3:B)+(C3:C)-8,0),ARRAYFORMULA((B3:B)+(C3:C)), 0)
As long as I'm understanding you correctly, I believe this will work:
=if(lte(sum(B2:C)-8,0),0,sum(B2:C))
It's at the top of the row and sums columns B and C. You can add more columns easily this way by either changing B/C to something else or passing more columns in.
Sum-8 is greater than 0
Sum-8 is less than 0
If what you want to do is to add each row to the total but only if its sum is 8 or greater, then your original formula was nearly OK but the two parts of the IF statement should have been reversed
=sum(ArrayFormula(if(LTE((B3:B)+(C3:C)-8,0),0,(B3:B)+(C3:C))))
You could also take most of the brackets out
=sum(ArrayFormula(if(LTE(B3:B+C3:C-8,0),0,B3:B+C3:C)))
and this would also work
=sum(ArrayFormula(if(LTE(B3:B+C3:C,8),0,B3:B+C3:C)))
Short answer
ARRAYFORMULA that can show 0 if the value is less than or equal to zero. Otherwise show the value of that set of data:
=ArrayFormula(IF(LTE(A1:A3,0),0,A1:A3))
Explanation
The basic IF syntax requires the use of scalar values, to use it with arrays, ARRAYFORMULA is required as an outer function:
ARRAYFORMULA(IF(array_logical_expression,array_if_true,array_if_false))
For the specific case described on the body of the question, the corresponding formula is:
=ARRAYFORMULA(IF(LTE(B3:B+C3:C-8,0),0,B3:B+C3:C))
Reference
Google Docs editors Help
IF
ARRAYFORMULA
Using arrays in Google Sheets
I'm using the query language to query data from spreadsheet.
I would like to retrieve the first row(column headers), how do I do that?
Currently I'm using: select * where ( A = -1 )
, the data in A column is never equal to -1, so it returns only column headers.
Is there a straightforward way to do this?
You can use query(A:Z, "select * limit 0", 1) meaning: select all, return at most 0 rows. The result is that only the header row is returned (the 3rd parameter is to make it clear there is 1 header row).
But it's not really natural to use query for this purpose. The function array_constrain is provided for the purpose of truncating an array of data. For example,
=array_constrain(A:Z, 1, 1e7)
returns the first row of the given array. (Since no limit on the number of columns is needed, I gave 1e7 = 10,000,000 as the maximal number of columns. A spreadsheet can't even have that many cells.)
I have an Rdlc report
In this report I have a field which takes its values by this expression
(Round(((First(Fields!Occurs.Value) / First(Fields!TotalDistance.Value))* 10000),2)
but in some cases (TotalDistance.Value) = 0 so the previous expression returns Infinity,
So I need to get the next record in case of that field equals 0 ,
If also next field equals 0 , I want to get the next one
I looked for way of getting next record but didn't find
I only found (First , Last) methods,
How can I do that ?
instead of using First or Last if you don't care which record as long as it isn't 0 then couldn't you use an aggregate function. ex:
(Round(((First(Fields!Occurs.Value) / MAX(Fields!TotalDistance.Value))* 10000),2)
you could use Max, Min or Avg to get a value. I am unaware of any way within the rdlc to loop through the records like you are asking.
Another completely different way could be to load the data into a datatable then add a column to contain the calculated value and use some code to calculate the values before being passed to the report.