I have a logger that sends data to a Google Sheet every 5 minutes (by adding a new row to it).
I would like the charts I associated with the sheet to update their range automatically. If possible, I would like to avoid scripts.
It seems to me you should be able to set the chart range to the appropriate columns. Such as A:A. Can you share what the Data range for your chart is. Shown here:
In the above example, let's say columns I thru AG were going to go on in perpetuity due to logging. I could put I:AG in the data range field but it will auto update to the last row in the sheet. If you want to work around using this, add a bunch of blank rows at the bottom of the sheet and you will rarely need to update the range (&add more rows.)
Related
I have a Google Sheet that I'm using as a database for a an app I am building in AppSmith. Really just an interface for people to work with the sheet in a controlled manner.
I'm using the Google Sheet because I'm familiar with layering formulas to make it work the way I want it to work. I have a number of columns that start with an ARRAYFORMULA that gives the name of the column in row 1, blank in blank rows that should be blank, and some programmed information in other rows.
This works great as long as I am working from the spreadsheet or reading/adding rows from the app.
However, when I try to edit the row from the app, the API update will take the "50" that it sees in the column and actually put "50" in the cell, breaking the arrayformula.
Is there any way to prevent API calls from actually editing that column? Or to automatically clear the cell and let the arrayformula expand again?
I found a temporary workaround to push "" for the column(s) I know are arrays, but it seems vulnerable to complications if I add other array columns later, or want to make another form in the app that also updates the sheet.
As a "rule of thumb", avoid having formulas on sheets being used as "databases" (top row used for field names, 2nd row and below used for data). If you really need to use formulas in the spreadsheet instead of doing the calculations on the "APP", add them on a "mirror" sheet.
This is a common recommendation when using ARRAYFORMULAS to do calculations with data comming from Google Forms.
If you think that creating a "mirror" sheet might cause more problems than benefits, if your "APP" is able to limit the number of columns being edited, put the formulas to the right of the last column linked to the app.
Related
Make Google Spreadsheet Formula Repeat Infinitely
Collections Sheet
Expenses Sheet
Hi, I would like to get the daily sum/difference of the expenses from the expenses sheet then output to collections sheet using dates as reference/identifier.
I tried this code =MINUS(C8,INDEX(Expenses!20:31,12,2)) but I want it to auto compute when I drag the box. sorry for bad english. thank you
Desired output:
Desired Output
Output at (Net) Cash On Hand Row / Reference Date Column, the output should be August 1 Collection - August 1 Expenses.
The main issue is with the structure of your expense sheet, since you need to use only every second column. For this you can use various methods, something like
=split(substitute(join(";",Expenses!A2:DJ2),"Total:;",""),";")
The join function takes the whole row and joins it into one string, the substitute function removes the Total: from it, along with the trailing ; and the split function separates it again to separate values. This will be an array, automatically spread out to 31(-ish) columns width if entered into a cell like C10 on your Collections sheet.
Then you have two options, simply do =C8-C10 in C9, which you can drag with no problem. You can also hide the row 10 by making the text color white, or even integrate it in that sheet.
My recommendation however is not to do any of that, instead enter the formula
=arrayformula(C8:AG8 - split(substitute(join(";",Expenses!A2:DJ2),"Total:;",""),";")
into C9 on the Collections sheet and it's taken care of, without the need to drag it out. You might need to tweak it, not sure if the AG8 and DJ2 are the correct columns to end them on (should be the last column if every column or every 2 columns is a day). The arrayformula makes sure that the subtractions are done automatically for each pair of values, and expanded automatically into the row. Make sure that there are no values or formulas in D9:AG9, so it can fill up the values automatically and you don't get a #REF error.
I have a Google Sheet that has a main master sheet, with a column for users to fill in their Name to show they are "working" on that row, then that row gets populated to their own tab based on a =QUERY(Master!A3:AA,"select * Where L='Name'") for each of the users' tabs, there is 8 total tabs where users are updating information. This is already quite a bit of processing on Googles part, so I am trying to generate a separate Google Sheet that pulls in the information that the users are entering on each of their tabs so the management can monitor that sheet for updates and then both sheets will run a lot faster/smoother.
I have tried using a VLookup with this syntax: =vlookup(A3,importrange("sheetID",{"Name1!$A$3:$N";"Name2!$A$3:$N";"Name3!$A$3:$N";"Name4!$A$3:$N";"Name5!$A$3:$N";"Name6!$A$3:$N";"Name7!$A$3:$N";"Name8!$A$3:$N"}),12,FALSE) which gives me an #N/A Error, cannot find Value '1' in VLOOKUP evaluation.
I have also tried using a =QUERY({importrange("sheetID"x8 with the ranges)}, "Select Col12,Col13,Col14 where Col2 matches '^.\*($" &B3 & ").\*$'")
That only returns headers, I am trying to get the query to basically find the unique key in Column A then spit out what is in Col 12-14, but that doesn't seem to work either. Columns 1-11 are static, but Columns 12-14 are what I am trying to populate for the management, which is the work that the staff is inputting on each of their tabs.
I can get the query working if I keep it on the same worksheet as the one the staff is working on, but then it bogs down the whole sheet so I would like to keep it separate if possible. Any ideas? I can't provide a sample sheet at this time since it has financial info on it, but I can add more details if I know what to look for.
your formula should be:
=VLOOKUP(A3, {
IMPORTRANGE("sheetID1", "Name1!A3:N");
IMPORTRANGE("sheetID2", "Name2!A3:N");
IMPORTRANGE("sheetID3", "Name3!A3:N");
IMPORTRANGE("sheetID4", "Name4!A3:N");
IMPORTRANGE("sheetID5", "Name5!A3:N");
IMPORTRANGE("sheetID6", "Name6!A3:N");
IMPORTRANGE("sheetID7", "Name7!A3:N");
IMPORTRANGE("sheetID8", "Name8!A3:N")}, 12, 0)
keep in mind that every importrange needs to be run as a standalone formula where you connect your sheets by allowing access. only then you can use the above formula
Simplified scenario:
Sheet Customer_Orders, has blocks of rows with each row having product code, count ordered, and size. Bunch of other stuff is looked up/calculated on the basis of these three tidbits. By the end of the season this sheet has about 5000 rows.
Sheet Raw_Inventory has start of year in the first 500 rows, and then does a query to Customer_orders. By season end this sheet has about 2000 rows.
Near as I can tell, this query runs every time I change one of the 3 fields in Cust_Orders.
Sheet Inv_Status is a pivot table that runs against Raw_Inventory, and again, I think that every time Raw_Inventory is modified, the pivot table is recalculated. (There are a couple of other pivot tables that use the same data.)
The result is that making a change on Cust_Orders can result in up to 2 minutes while the calculations catch up.
(Hardware: Mac Pro, 24 GB ram, 3.2 GHz, 4 core; Current version of Chrome running under Yosemite)
What I would like to do is one of the following:
Lengthen the time between updates.
Be able to recalculate sheet Raw_Inventory manually.
A partial workaround:
I've created a new sheet that imports raw_Inventory. This copy is used for the pivot table. ImportRange only runs every 30 minutes.
The next step will replace the query with 1 zillion simple assignment statements. I'm hoping that this will replace querying 3000 lines with querying a single line when I make a change in Cust_Orders.
There is no way to disable automatic recalculation in Google Sheets. One option is to replace the formulas by the values either by using copy/paste as value only or by using a script. The advantage of using a script is that it also could be used to add again the formulas when needed.
Related
Ho do I stop and start autoupdating in Google Sheets?
Formulas always recalculating when refreshing/loading spreadsheet
I had a similar problem, I solved it by creating an enabling cell and in that cell I put 0 or 1 and then I used that cell inside the formula. In such a way that:
A
B
1
enable formula
0
2
= if(B1=0; 0; complex_formula1)
= if(B1=0; 0; complex_formula2)
3
= if(B1=0; 0; complex_formula1)
= if(B1=0; 0; complex_formula2)
This way when I need to change the spreadsheet I disable formulas (putting 0 on A1), change spreadsheet and on end I enable formulas (putting 1 on A1).
It's not the best solution, but it worked for me.
This is not an answer to my original question -- how to control recalculation, but is a workaround, and ultimately a better solution.
Quick restatement of problem:
CustOrders pulled descriptions of inventory off of RawInv sheet.
RawInv updated from CustOrders. This wasn't quite a circular dependency, as RawInv only updated quantities from CustOrders. But it meant that anytime a change was made in CustOrders, RawInv needed to be recalcuated.
This was made worse by having one query per line creating descriptions.
The solution amounted to refactoring.
Another spreadsheet was created, CustSupport.
It kept RawInv and Trees -- the latter being the descriptions. It also had the master reference sheet for prices and round off tables. These two tabs are rarely changed, and are copied as needed to sheets that use them.
It imported a copy of CustOrders. Since this copy had no dependencies back to to main ordering sheet, I didn't have to wait for it to recalculate.
RawInv recalculated from this copy of CustOrders.
I did a wholesale replacement of Querys with VLookups. This required some rearrangement of columns.
I would like to create a new sheet from Google Form data which only imports cell data that matches specific criteria. Respondents have five response options for a number of questions (all questions have the same five options). I want the new sheet to only show the data in the cells that fit my criteria and the cells that don't, should be blank. I would like all rows and column formatting to remain the same.
I've got the import range part down, but I don't know should I use query, filter, if, or some other function?
Within the same spreadsheet, QUERY works well. You could also use QUERY(IMPORTRANGE( or just IMPORTRANGE if you want it to go to a different spreadsheet.
As Rubén said, if you want to maintain all the formatting, without manually doing it yourself on the destination sheet, you'll need to use script.
Query Reference
EDIT
See Sheet3 HERE. Make a copy to edit.
Any cell with a blue background has a formula. The main one is below.
=ARRAYFORMULA(IF('Form Responses 1'!D3:DD="","",SWITCH('Form Responses 1'!D3:DD,$D$1,"",$E$1,"",'Form Responses 1'!D3:DD)))
You will not be able to edit those columns. If you need to edit (like the "Comments/Adaptations" columns, you could modify the formula above and apply it column by column.
If that works, please click the green check mark to accept the answer!
Beside the number format, any formula keeps the format of the source range, so if your the format includes fonts styles, bold, italics, colors, etc., instead of a formula you should use a script.