I have a column that has multiple comma separated values, I need to use Split function and then run index match on that column, is it possible ? if yes somebody can help pls
Yes, you can do this, I just tested it in google sheets.
=INDEX(<array>,MATCH(SPLIT(<cell>,","),<array>,0))
To be honest, I was googling for something similar and ran across this issue. My problem turned out to be that I was using ',' and NOT ",". I suspect you asked this question for similar reasons (you tried it and it didn't work). So just to confirm, it is totally possible, the issue is likely an error with your formula.
output of a minimal example, using the above formula, matching on the first split:
I am using PHPSpreadsheet and am reading in a spreadsheet with the following (working correctly) formula. I'm using Libre Office to generate my spreadsheet.
=SUMIFS($My_sheet.C:C,$My_sheet.B:B,">"&$'Home page'.$I$12,$My_sheet.B:B,"<"&$'Home page'.$I$13)
For some reason when I remove the offending rows my sheet reads/writes perfectly fine but with them I get corrupted files and it throws unreadable files.
I'm not setting the value - this is already in the spreadsheet I'm reading.
I hope this will help someone. I was looking for PhpOffice\PhpSpreadsheet\Calculation\Statistical\Conditional::SUMIFS() as your call.
For the example given simply wrap each , separated section in quotes and pass them to this function. So the answer would be:
use PhpOffice\PhpSpreadsheet\Calculation\Statistical\Conditional as StatCond;
StatCond::SUMIFS('$My_sheet.C:C','$My_sheet.B:B','">"&$\'Home page\'.$I$12','My_sheet.B:B','"<"&$\'Home page\'.$I$13')
New to APIs in Google sheets, but I feel like I'm 95% of the way to where I'm trying to go.
I'm trying to pull crypto data into my spreadsheet to do a simple 24 hour price comparison and gauge whether the price has gone up or down, maybe use some conditional code to change the background to green or red. Simple enough. Most of the sites that offer APIs have given me various errors, though, so coinbase pro (and weirdly the deprecated gdax) have been most reliable (although I haven't ruled out that it started breaking because I'm now putting in too many call requests).
Found this as a way to get the current price of ETH, for instance:
=VALUE(SUBSTITUTE(SUBSTITUTE(INDEX(IMPORTDATA("https://api.gdax.com/products/ETH-USD/ticker"),0,2), "price:",""), """", ""))
Works like a charm. So I changed the request to target different info, specifically the 24hr stats listed on the API doc, and the first value in that section, "open" for opening price (this ensures I get the price exactly 24hrs earlier). But I got a weird parsing error using the request, which is here:
=VALUE(SUBSTITUTE(SUBSTITUTE(INDEX(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"),0,1), "open:",""), """", ""))
I've figured out the issue, but not the solution. Google Sheets says I am pulling in text. Because the "open" (opening price) value is the first listed in the JSON code, it is pulling in the code bracket from the nested HTML/JSON code. For instance, it says I can't parse "{open" into a number. And I get the same problem in reverse when I pull the last value listed in the stats section, which is "volume_30day:"
=VALUE(SUBSTITUTE(SUBSTITUTE(INDEX(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"),0,6), "volume_30day:",""), """", ""))
This returns an error saying "volume_30day: #}" can't be parsed, so now it is the closing bracket of the JSON code. So I can't use "open" the first item in the API 24hr stats section, or Volume_30day, which is the sixth item on that list, but items 2-5 work just fine. Seems super weird to me, but I've tested it and it is seems to be what's going on.
There must be something stupid I need to tweak here, but I don't know what it is.
Answer 1:
About =VALUE(SUBSTITUTE(SUBSTITUTE(INDEX(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"),0,1), "open:",""), """", ""))
When I checked =SUBSTITUTE(SUBSTITUTE(INDEX(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"),0,1), "open:",""), """", ""), the value is {open:617. I think that when by this, when VALUE is used for the value, the error occurs.
In order to retrieve the values you expect, I would like to propose to use REGEXREPLACE instead of SUBSTITUTE. The modified formula is as follows.
=VALUE(REGEXREPLACE(INDEX(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"),0,1), "open|""|{|}|:",""))
In this modified formula, open|""|{|}|: is used as the regex. These are replaced with "".
In this case, I think that =VALUE(REGEXEXTRACT(INDEX(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"),0,1), "\d+")) can be also used. But when I thought about your 2nd question, I thought that above formula might be useful.
Result:
Answer 2:
About =VALUE(SUBSTITUTE(SUBSTITUTE(INDEX(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"),0,6), "volume_30day:",""), """", ""))
When I checked =SUBSTITUTE(SUBSTITUTE(INDEX(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"),0,6), "volume_30day:",""), """", ""), the value is 7101445.64098932}. I think that when by this, when VALUE is used for the value, the error occurs.
In order to retrieve the values you expect, I would like to propose to use REGEXREPLACE instead of SUBSTITUTE. The modified formula is as follows.
=VALUE(REGEXREPLACE(INDEX(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"),0,6), "volume_30day|""|{|}|:",""))
In this modified formula, volume_30day|""|{|}|: is used as the regex. These are replaced with "".
In this regex, it can use by replacing open of open|""|{|}|: to volume_30day at above regex.
Result:
Other pattern 1:
As other pattern using the built-in formula, how about the following modified formulas?
=VALUE(TEXTJOIN("",TRUE,ARRAYFORMULA(IFERROR(VALUE(REGEXREPLACE(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"), "open|""|{|}|:","")),""))))
=VALUE(TEXTJOIN("",TRUE,ARRAYFORMULA(IFERROR(VALUE(REGEXREPLACE(IMPORTDATA("https://api.pro.coinbase.com/products/ETH-USD/stats"), "volume_30day|""|{|}|:","")),""))))
In these formulas, the values can be retrieved by replacing KEY of KEY|""|{|}|: of the regex.
Other pattern 2:
The returned value from https://api.pro.coinbase.com/products/ETH-USD/stats is the JSON value. So in this case, when the custom function created by Google Apps Script can be also used.
The Google Apps Script is as follows.
const SAMPLE = (url, key) => JSON.parse(UrlFetchApp.fetch(url).getContentText())[key] || "no value";
When you use this script, please copy and paste the above script to the script editor of Spreadsheet and save it. And please put the custom function like =SAMPLE("https://api.pro.coinbase.com/products/ETH-USD/stats","open") and =SAMPLE("https://api.gdax.com/products/ETH-USD/ticker","price") to a cell. By this, the value can be retrieved.
References:
REGEXREPLACE
Custom Functions in Google Sheets
I'm reading currency values from a website and I'd like to do some calculations with these numbers. They come in this format:
$7,821.24
Here's an example file:
https://docs.google.com/spreadsheets/d/1vHEH_m16KXcDh7hY_BVG9lur1huFjWOnx5bWtgrdGdA/edit?usp=sharing
Now for some reason neither VALUE() and TO_PURE_NUMBER work for me (Can't parse to numberic value, telling me it's a text value).
My guess is that the comma and the $-sign confuse the formula, is there anything I can do to format this correctly? The dollar sign always appears in the values but the comma only appears separating thousands of values.
I just started using Sheets for this so I absolutely have no clue. Would really appreciate if someone could help me out.
Thanks for your time!
Issue:
It's a locale problem. The value coming from IMPORTXML is formatted as in United States locale, so your spreadsheet (which uses a different format) cannot convert it.
Solution #1. Changing locale:
If the spreadsheet locale is changed to United States or others with the same format (via selecting File > Spreadsheet settings and setting the mentioned locale), the retrieved value will be a number, and you can work with it without using any other formula.
Solution #2. Formula:
If changing the locale is not an option, one possible way to convert the value to a valid number in your locale is the following formula:
=SUBSTITUTE(SUBSTITUTE(RIGHT(A2;LEN(A2)-1);",";"");".";",")
Changing locale didn't work in my case. But I was able to split the number which google sheet isn't detecting as a real number. So split it with "," and "." and any currency sign you may have, and then combine individual values for desired output
I’ve looked through the forum, but haven’t found a solution. I’ve got some survey responses in a table like so:
It’s okay
I don't like school
It’s okay
Good, I like it
I’m using a countif function to count the number of times each response was received in the survey. The thing is my function works well with these values:
I don’t like school
Good, I like it
but my function does not pick up the phrase
It’s okay
As I’m using named ranges, the formula I am using is:
=COUNTIF(Question,"It's okay")
Please see this shared link for the example file and check out sheet 2 for the actual formula.
https://drive.google.com/open?id=1e1ccJh3TDeOsIrcn0f5ewQ3M6xOuBrfKBqqJ3mzXfV0
Initially, I thought the issue was that the countif function wasn’t working because of the apostrophe in the word “it’s okay”. As you can see from my example, there are other words with apostrophes in them that get counted so I’m baffled as to why this function is not working for the phrase “it’s okay”.
Has anyone seen this problem before, or any ideas as to how I could accomplish the same thing using another process?
I’ve also tried to escape the apostrophe like so :
=COUNTIF(Question,"It''s okay")
=COUNTIF(Question,"It\'s okay")
But neither case made any difference.
Many thanks in advance
That's because you have different apostrophes in data and in formula:
’ ("Right single quotation mark", ASCII code 146) in data
' ("Single quote", ASCII code 39) in formula