Need to post a byte message to solace queue using Jmeter. I have tried in following manner might be am incorrect but tried with following:
Use JMSPublisher sampler
create jndi.properties file and put in jmeter/lib
jndi.properties
java.naming.factory.initial = com.solacesystems.jndi.SolJNDIInitialContextFactory
java.naming.provider.url = smf://<remote IP and port>
java.naming.security.principal=<username>
java.naming.security.credentials=<password>
Solace_JMS_VPN=<VPN Name>
in JMSPublisher sampler (in GUI)
Connection Factory = connectionFactory
Destination = (Queue Name )
Message Type (radio button---Byte message)
Content encoding -- RAW
in text area ---> (Byte message)
Note : I have used actual values of IP/port/username/port/queuename/bytemessage, cannot share those. Soljms jar is available in lib folder too.
getting error :
Response message: javax.naming.NamingException: JNDI lookup failed - 503: Service Unavailable [Root exception is (null) com.solacesystems.jcsmp.JCSMPErrorResponseException: 503: Service Unavailable]
Though it is working perfectly fine when did with java spring boot. There used properties files in place of JNDI.
It would be great if anyone can guide me , please do not give activeMQ JNDI am actively looking for posting on solace queue or create connection to solace appliances through Jmeter.
I don't think you should be putting your Byte message into the textarea as it accepts either plain text or an XStream object, consider providing your payload via binary file(s) instead
If you're capable of sending the message using Java code you should be able to replicate the same using:
JMeter's JSR223 Sampler with Groovy language (Java syntax will work)
Or JUnit Request sampler if you need "strict" java
Related
I’m using jersey-client v1.18.1
I need to make 2 sequential requests where the 1st request has an InputStream and then must pass that same InputStream along to the 2nd request (eg. sort of like a proxy). The 2nd request will then write the InputStream to disk and send back to the 1st request the fully qualified path to the location on disk where the 2nd request wrote the file.
The following code-snippet outlines what I have tried, but cannot get to work properly. I’m currently receiving the error:
"com.sun.jersey.api.client.ClientHandlerException: A message body writer for Java type, class org.seleniumhq.jetty9.server.HttpInputOverHTTP, and MIME media type, application/octet-stream, was not found”
I believe I have all the proper Maven dependencies in my project for the MIME and message body writers.
1st Request originating on Host 1 going to Host 2
Client client = Client.create();
client.resource(uri_for_request_1)
client.path(“request_1_servlet");
client.queryParam(“uri_for_request_2", uri_for_request_2);
client.queryParam("targetFilename", targetFilename);
ClientResponse response = client.accept(MediaType.APPLICATION_JSON).entity(inputStream).post(ClientResponse.class);
2nd Request originating on Host 2 going to Host 3
Client client = Client.create();
client.resource(request.getParamater(“uri_for_request_2"))
client.path(“request_2_servlet");
client.queryParam("targetFilename", request.getParamater(“targetFilename");
ClientResponse response = client.accept(MediaType.APPLICATION_JSON).entity(request.getInputStream()).post(ClientResponse.class);
Host 3
Writes InputStream to file and sends back to Host 2 fully qualified path.
Host 2
Sends back to Host 1 fully qualified path.
Variations I’ve tried on post calls:
client.accept(MediaType.APPLICATION_JSON).type(MediaType.APPLICATION_OCTET_STREAM).entity(inputStream).post(ClientResponse.class);
client.accept(MediaType.APPLICATION_JSON).type(MediaType.APPLICATION_OCTET_STREAM).post(ClientResponse.class, inputStream);
I can confirm the 1st request is being made on Host 1 and reaches Host 2. It is the 2nd request on Host 2 that fails during the post() call.
I'm using BizTalk 2013 R1 to download a binary blob from a website via http. When I receive the blob, I'm just storing the message in an XmlDocument. However, sometimes that site returns the files I want, and sometimes it returns errors in the form of http pages containing error information.
I've attempted to screen for this by trying to run xpath on my return message. In particular, I'm looking for occurrences of "Error" in /html/head/title. My thinking is that if it find that text, or if it parses as Xml at all, I've gotten an error and I should throw an exception.
In practice though, I get this when I attempt to run that xpath:
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 128.30.52.100:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials, IWebProxy proxy, RequestCachePolicy cachePolicy)
at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)
at System.Xml.XmlTextReaderImpl.OpenAndPush(Uri uri)
at System.Xml.XmlTextReaderImpl.PushExternalEntityOrSubset(String publicId, String systemId, Uri baseUri, String entityName)
at System.Xml.XmlTextReaderImpl.DtdParserProxy_PushExternalSubset(String systemId, String publicId)
at System.Xml.DtdParser.ParseExternalSubset()
at System.Xml.DtdParser.Parse(Boolean saveInternalSubset)
at System.Xml.DtdParser.System.Xml.IDtdParser.ParseInternalDtd(IDtdParserAdapter adapter, Boolean saveInternalSubset)
at System.Xml.XmlTextReaderImpl.ParseDtd()
at System.Xml.XmlTextReaderImpl.ParseDoctypeDecl()
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc)
at System.Xml.XmlDocument.Load(XmlReader reader)
at System.Xml.XmlDocument.Load(TextReader txtReader)
at Microsoft.XLANGs.Core.Value.GetXmlDocument()
at Microsoft.XLANGs.Core.Value.RetrieveAs(Type t)
at Microsoft.XLANGs.Core.Part.get_XmlDocument()
at Microsoft.XLANGs.Core.Part.XPathLoad(Part sourcePart, String xpath, Type dstType)
at QTC.BizTalk.LSPDispatchIMNL.SendCommercialInvoice.segment3(StopConditions stopOn)
at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
Upon seeing this, it makes sense since I believe that BizTalk handles messages as streams in the background. Suddenly, the technique of hiding binary in XmlDocuments makes sense. So perhaps my test itself is causing a different problem.
I would like to be able to validate my response in some way, however. Is there anything I can do to analyze the response I get from the site, without causing the message to load? There's nothing all that useful in the context properties so I'm curious what I can do.
I'm not really sure how to make sense of your error (especially without seeing the code you're actually using to check the message), but either way I think you should do this in a custom pipeline component, for a few reasons.
Loading the XmlDocument into the orchestration is going to be prohibitive if you're dealing with large binary objects.
Trying to use XPath on binary data won't work
Trying to use XPath on HTML won't always work
You could very easily check the message size in a pipeline component (pInMsg.BodyPart.GetOriginalDataStream().Length for example). You could also try to read the first few bytes of the stream and check those for certain conditions more efficiently.
I have succesfully used neo4jphp library with graphenedb with this simple steps as per documentation (considering that graphenedb does not require https)
require('vendor/autoload.php'); // or your custom autoloader
// Connecting to a different port or host
$client = new Everyman\Neo4j\Client(url, port);
// Connecting using HTTP and Basic Auth
$client->getTransport()
->setAuth('username', 'password');
// Test connection to server
print_r($client->getServerInfo());
However, when trying to connect to a graphstory instance (of course they both work fine if I call the rest api from browser, the neo4j console works fine etc.) which requires https as follows
require('vendor/autoload.php'); // or your custom autoloader
// Connecting to a different port or host
$client = new Everyman\Neo4j\Client(url, port);
// Connecting using HTTPS and Basic Auth
$client->getTransport()
->useHttps()
->setAuth('username', 'password');
// Test connection to server
print_r($client->getServerInfo());
I get the following error. They should be identical, I can't get why.
Fatal error: Uncaught exception 'Everyman\Neo4j\Exception' with message 'Can't open connection to https://neo-54f500bf2cc7e-364459c455.do-stories.graphstory.com:7473/db/data/' in /Applications/XAMPP/xamppfiles/htdocs/graphene/vendor/everyman/neo4jphp/lib/Everyman/Neo4j/Transport/Curl.php:91
Stack trace:
#0 /Applications/XAMPP/xamppfiles/htdocs/graphene/vendor/everyman/neo4jphp/lib/Everyman/Neo4j/Transport.php(95): Everyman\Neo4j\Transport\Curl->makeRequest('GET', '/', NULL)
#1 /Applications/XAMPP/xamppfiles/htdocs/graphene/vendor/everyman/neo4jphp/lib/Everyman/Neo4j/Command.php(64): Everyman\Neo4j\Transport->get('/', NULL)
#2 /Applications/XAMPP/xamppfiles/htdocs/graphene/vendor/everyman/neo4jphp/lib/Everyman/Neo4j/Client.php(828): Everyman\Neo4j\Command->execute()
#3 /Applications/XAMPP/xamppfiles/htdocs/graphene/vendor/everyman/neo4jphp/lib/Everyman/Neo4j/Client.php(464): Everyman\Neo4j\Client->runCommand(Object(Everyman\Neo4j\Command\GetServerInfo))
#4 /Applications/XAMPP/xamppfiles/htdocs/graphene/story.php(20): Every in /Applications/XAMPP/xamppfiles/htdocs/graphene/vendor/everyman/neo4jphp/lib/Everyman/Neo4j/Transport/Curl.php on line 91
It seems to me that neo4jphp is not configuring the TLS part in the cURL request.
I fixed it by downloading the certificate bundle from http://curl.haxx.se/docs/caextract.html (ca_bundle.crt) and adding the following line to Everyman\Neo4j\Transport\Curl.php, function makeRequest:
$options[CURLOPT_CAINFO] = "your/path/to/ca-bundle.crt";
I've created an issue on GitHub for this: https://github.com/jadell/neo4jphp/issues/171
I'm the CTO/Lead Dev at Graph Story. Sorry to hear you're having troubles. I've actually just taken a look at your instance and things seem OK from the server side.
Without additional info it's hard to say if there's an issue with your sample connection code. Considering that you've used that same library to connect to GrapheneDB in the past, I think the chances an error in the sample code is low.
Based on the current state of your instance and on the exception thrown by Neo4jPHP, my guess is that port 7473 may be blocked on your network. You can confirm that with local tech support or by switching to a network where you know port 7473 is open and trying to connect again.
Problem
I have added support for http compression in our self-hosted OWIN/Katana Web API OData 4 service but I do not see how to support compression in the .NET client. I'm using OData libraries v6.5.0 and I need to support compression/decompression in the client (OData v4 Client Code Generator). I am using Deflate encoding for the compression via an ActionFilter. Everything compresses correctly on the server as confirmed via Fiddler but I do not know how to configure the client to support this now that the OData client uses the Request and Response Pipelines instead of the now defunct WritingRequest and RecievingResponse events that once supported this very scenario.
Attempts
By experimentation I found that I can hook into the ReceivingResponse event on my DataServiceContext and then call ReceivingResponseEventArgs.ResponseMessage.GetStream() but I don't know what to do to overwrite the message content correctly. If I CopyTo() on the stream, I get a null reference exception at Microsoft.OData.Core.ODataMessageReader.DetectPayloadKind(). I presume this is because the stream was read to the end and the position needs to be set back to zero but I cannot do that because the stream also throws an exception when setting the position back because it says it does not support seeking. I presume this is simply due to the stream being read-only. Even if I could copy the stream to decompress it successfully, how do I modify the response message content with the decompressed content? I don't see any hooks for this at all in the RequestPipeline or ResponsePipeline. To clarify, I want to decompress the response message content and then set it for the materialization that occurs soon after, how might I do that? Extra credit for how to also send compressed requests to the OData service. Thanks!
OData client use the HTTPWebRequest and HTTPWebReponse, which supports the compression well. Try setting the AutomaticDecompression of HTTPWebRequest to Deflate or GZip, in SendingRequest2 pipeline event, like this:
private void OnSendingRequest_(object sender, SendingRequest2EventArgs args)
{
if (!args.IsBatchPart) // The request message is not HttpWebRequestMessage in batch part.
{
HTTPWebRequest request = ((HttpWebRequestMessage)args.RequestMessage).HttpWebRequest;
request.AutomaticDecompression = DecompressionMethods.GZip | DecompressionMethods.Deflate;
}
}
Then in response, HTTPWebResponse will decompress the stream automatically, before the materialization work.
I am trying to do some POC on Rightfax integration with JAVA API. Installed all required components in Rightfax Server (JAVA/XML API) and configured the IIS (took care while installing the rightfax server) while running the sample java program getting following message
here are the details of the output in debug mode
<XML_FAX_SUBMIT java="1" stylesheet="XML_FAX_SUBMIT.xslt" xmlns="x-schema:XML_FAX_SUBMIT.xdr">
<INCLUDE_BEG>xml.beg</INCLUDE_BEG>
<SENDER>
<RF_USER>ADMINISTRATOR</RF_USER>
</SENDER>
<DESTINATIONS>
<FAX>
<TO_FAXNUM>555-7777</TO_FAXNUM>
</FAX>
</DESTINATIONS>
<BODY>
How about some body text.
Line 2
Line 3
</BODY>
<INCLUDE_END>xml.end</INCLUDE_END>
</XML_FAX_SUBMIT>
Initiating Connection to: http://<name>/rfxml/rfwebcon.dll
RETURN XML:
<?xml version="1.0"?>
<XML_FAX_SUBMIT_REPLY>
<FAX unique_id="unknown">
<STATUS_CODE>-1</STATUS_CODE>
<STATUS_MSG>Failed to load XML into DOM tree.</STATUS_MSG>
</FAX>
</XML_FAX_SUBMIT_REPLY>
Message Successfully Transported
ID: unknown
`Code`: -1
**Msg: Failed to load XML into DOM tree.**
Ended
could anyone help me if you come across this type of issue or any configuration is missing at Fax Server or IIS side.
//Create a outbound fax object
RFaxSubmit faxSubmit= new RFaxSubmit();
//set XMLNS and make sure you have XML_FAX_SUBMIT_schema.xml in your classpath.
faxSubmit.m_FaxDocument.setXMLNS("classpath:XML_FAX_SUBMIT_schema.xml");
This file must be available on your RightFax server, # this location \RightFax\Production\xml\schemas\XML_FAX_SUBMIT_schema.xml download this file or ask server support and add it in your classpath.