I have searched but nothing useless, only "use \newline" or "use \".
I'm creating a simple latex document to store any texts instead of using .txt, and the problem is that the pdf document contains the lines going towards right until they go out of the paper.
I'm using this simple code
\documentclass[a4paper]{article}
\usepackage{geometry}
\geometry{
a4paper,
total={170mm,257mm},
left=5mm,
top=20mm,
}
\begin{document}
\section{Text 1}
Loremipsumdolorsitamet,consecteturadipiscingelit,seddoeiusmodtemporincididuntutlabore etdoloremagnaaliqua.Utenimadminimveniam,quisnostrudexercitationullamcolaborisnisiutaliquipexeacommodoconsequat.Duisauteiruredolorinreprehenderitinvoluptatevelitessecillum doloreeufugiatnullapariatur.Excepteursintoccaecatcupidatatnonproident,suntinculpaquiofficiadeseruntmollitanimidestlaborum.
\end{document}
Since latex sees it as a one word, it refuses to break it since it doenst know its hyphenation. But I would like to allow latex to break it regardless. Any thoughts ?
Remarks: I already have used:
\hspace{0pt}
\leavevmode\nobreak\hspace{0pt}
\mbox{Loremip...larorum.}
Nothing worked.
I think I got why nothing worked. See my code below, that I managed to compile successfully after editing your MWE.
You basically have two ways to force hyphenation here.
As in the comment by SamCarter, you manually split words within text, just using \- where necessary. I did it below in line 18 (6 from bottom).
You add to your preamble the command \hyphenation{word-to-split}: I did this below to hyphenate the word in line 20 (4 from bottom). Notice that, in this case, you use - instead of \- within the braces {} enclosing the argument.
\documentclass[a4paper]{article}
\usepackage{geometry}
\geometry{
a4paper,
total={170mm,257mm},
left=5mm,
top=20mm,
}
\hyphenation{Duisauteiruredolorinre-prehenderitinvoluptatevelitesse-cillum doloreeufugiatnullapariatur}
\begin{document}
\section{Text 1}
Loremipsumdolorsitamet, consecteturadipiscingelit,
seddoeiusmodtemporincididuntutlaboreetdoloremagna.
Uten\-imadminimveniam,
quisnostrudexercitationullamcolaborisnisiutaliquipexeacommodoconsequat.
Duisauteiruredolorinreprehenderitinvoluptatevelitessecillumdoloreeufugiatnullapariatur.
Excepteursintoccaecatcupidatatnonproident,
suntinculpaquiofficiadeseruntmollitanimidestlaborum.
\end{document}
Finally, if the full stop character . is not followed by a space, two separate words may be interpreted as one and the command \hyphenation may not work as expected. Not sure that this was the detail making you write that nothing worked, but be careful to this too.
Related
csquotes doesn't work in this case, maybe because I'm using a custom command:
\documentclass[12pt, letter, american]{article}
\usepackage[american]{babel}
\usepackage[autopunct,style=american]{csquotes}
\newcommand{\qq}[1]{\textquote{#1}}
\begin{document}
This is an \qq{example}.
\end{document}
\qq will not move the trailing period into the quotation, e.g. This is an \qq{example}. will still yield This is an “example”. I have written a book using \qq and would like to change the quotation styles to one which moves periods and colons into the quotes. Is there a safe way to achieve this automatically? Maybe a package different from csquotes? The only solution I've found on the net so far didn't work with spacing correctly.
See the csquotes documentation, section 9.2:
\documentclass[12pt]{article}
\usepackage[american]{babel}
\usepackage[autopunct,style=american]{csquotes}
\renewcommand{\mktextquote}[6]{#1#2#4#5#3#6}
\newcommand{\qq}[1]{\textquote{#1}}
\begin{document}
This is an \qq{example}.
\end{document}
I need one more numbered level for my report. I used \paragraph{title} but it only appears without numbering.
In the config file, the paragraph is described as:
\titleformat{\paragraph}[runin]
{\normalfont\normalsize}{\theparagraph}{0pt}{\spacedlowsmallcaps}
I believe that the command \theparagraph is responsible for the numbering. Why doesn't it appear?
I searched the net for answers and tried the following commands (at once) before the beginning of the document:
\setcounter{secnumdepth}{\paragraphnumdepth}
Replace the previous command to get rid of run-in with:
\titleformat{\paragraph}
{\relax}{\textsc{\MakeTextLowercase{\theparagraph}}}{1em}{\normalsize\itshape}
\renewcommand{\theparagraph}{\thesubsection.\arabic{paragraph}}
I put the last two commands in \makeatletter and \makeatother.
The paragraph name appears like the section names now, but still no numbers. Any ideas? Here is a small example that works because I didn't include the classicthesis config files.
\documentclass{scrreprt}
\usepackage[utf8]{inputenc}
\setcounter{secnumdepth}{\paragraphnumdepth}
\begin{document}
\chapter{Chapitre}
\section{Introduction}
\subsection{Première sous-partie}
\subsubsection{Un cran en dessous}
\paragraph{Paragraphe with number: what I would like in my report}
Functional here because the problem clearly comes from the two classicthesis config files...
\end{document}
Thank you
How do I combine \afterpage and \endfloat to easily switch between having figures and tables at the end of the document or having them in the text?
I want to easily choose between my figures at the end of the document and my figures in the text. Because of that, sometimes I will use \afterpage package and other times I will use \endfloat would be nice to combine both.
Right now, all the times I try to run \endfloat when I have a clear page, I get the following message:
Argument of \efloat#xfloat has an extra }.
I already tried to include after page in the DeclareDelayedFloatFlavor, something like:
\DeclareDelayedFloatFlavor{afterpage}{figure}
It did not work.
\documentclass[12pt,a4paper]{article}
\usepackage[utf8]{inputenc}
\usepackage{float}
\usepackage{afterpage}
% ---------------------
%figures at the end
% ---------------------
\usepackage[nolists]{endfloat}
% force landscape at the end
\begin{document}
{\afterpage{
\begin{figure}
\end{figure}
}
\end{document}
If you want to switch between having figures within the text and at the end, I suggest to only use the endfloat package. Commenting or commenting it's optional argument disable will allow you to quickly alternate between figures at the end or in the text.
I'm not entirely certain what the purpose of afterpage was in your example, but if you used it to move the figure to a separate page, this can conveniently be done with the p floating specifier.
\documentclass{article}
\usepackage[
disable
]{endfloat}
\begin{document}
test
\begin{figure}[p]
xxx
\caption{caption}
\end{figure}
test
\end{document}
I'm using a LaTeX template (provided by ASME) to write a conference paper.
The asme2e.cls class defines a "nomenclature" environment as follows:
% Nomenclature environment
\newbox\tempbox
\newenvironment{nomenclature}{%
\newcommand\entry[2]{%
\setbox\tempbox\hbox{##1.\quad}
\hangindent\wd\tempbox\noindent{##1}\quad\ignorespaces##2\par}
\section*{NOMENCLATURE}}{\par\addvspace{12pt}}
which is used, in the .tex source file, as follows:
\begin{nomenclature}
% [...]
\entry{$C_{visc}$}{Viscous friction coefficient.}
\entry{$M$}{Spool mass.}
% [...]
\end{nomenclature}
resulting in the description texts not being left justified (since a fixed horizontal space is inserted between the symbol (e.g.: M) and the description (e.g.: Spool mass.), but the symbols have different lengths (e.g.: Cvisc is longer than M).
Is there a way to fix the class to have left-justified descriptions?
(I did a few experiments with \dimexpr and the calc package, but just got a bunch of errors).
(I also asked ASME if they could provide an updated template, but I'm still waiting for their feedback...)
I couldn't solve the problem, but I found a "quick and dirty" workaround, using the Tabbing and setspace packages.
Here is the new .tex source:
%[...]
\usepackage{Tabbing}
\usepackage{setspace}
%[...]
\begin{nomenclature}
{\setstretch{1.1}
\begin{tabbing}
\noindent
% [...]
\entry{$C_{visc}$}\quad\quad\={Viscous friction coefficient.}\\
\entry{$M$}\>{Spool mass.}\\
\entry{$v$}\>{Spool velocity.}\\
% [...]
\end{tabbing}
} % end \setstretch
\end{nomenclature}
%[...]
(Clearly, I'm completely bypassing the \entry command defined by the asme2e.cls class for the nomenclature environment).
I also tried to edit the asme2ej.cls file but nothing working for me. Then I ended up using the tabbing and set space packages. However, I did not use the \setstretch, and my document compiled just fine.
%[...]
\usepackage{Tabbing}
\usepackage{setspace}
%[...]
\begin{nomenclature}
\begin{tabbing}
\noindent
\entry{XYZ}\quad\quad\={This is an example}\\
\entry{PQR}\>{This is an example}\\
\entry{ZXC}\>{This is an example}\\
\entry{CVN}\>{This is an example}\\
\end{tabbing}
\end{nomenclature}
%[...]
I ran into a similar issue when submitting a paper to an ASME journal. My solution was to edit the asme2e.cls file:
\newenvironment{nomenclature}{%
\newcommand\entry[2]{\noindent\hbox to 0.05\textwidth{##1}\ignorespaces##2\par}
\section*{Nomenclature}}{\par\addvspace{12pt}}
You can change the amount of indentation by changing "0.05\textwidth".
I'm not sure if this is what you're asking, but see the following MWE:
\documentclass[12pt]{article}
\newlength{\nomenlabelindent}
\setlength{\nomenlabelindent}{4em}
\newenvironment{nomenclature}{%
\newcommand\entry[2]{%
\hangindent\nomenlabelindent\noindent\makebox[\nomenlabelindent][l]{##1\quad}\ignorespaces##2\par}%
\section*{NOMENCLATURE}}{\par\addvspace{12pt}}
\begin{document}
\begin{nomenclature}
\entry{$A$} {Parameter}
\entry{$B$} {Parameter}
\entry{$C$}{Parameter}
\entry{$D$}{Parameter}
\entry{$E$}{Parameter}
\end{nomenclature}
\end{document}
Output:
Nomenclature
I'm trying to create a new environment in my LaTeX document where indentation in the next paragraph following the environment is suppressed.
I have been told (TeXbook and LaTeX source) that by setting \everypar to {\setbox0\lastbox}, the TeX typesetter will execute this at the beginning of the next paragraph and thus remove the indentation:
\everypar{\setbox0\lastbox}
So this is what I do, but to no effect (following paragraph is still indented):
\newenvironment{example}
{\begin{list}
{}
{\setlength\leftmargin{2em}}}
{\end{list}\everypar{\setbox0\lastbox}}
I have studied LaTeX's internals as well as I could manage. It seems that the \end routine says \endgroup and \par at some point, which may be the reason LaTeX ignores my \everypar setting. \global doesn't help either. I know about \noindent but want to do this automatically.
Example document fragment:
This is paragraph text. This is paragraph text, too.
\begin{example}
\item This is the first item in the list.
\item This is the second item in the list.
\end{example}
This is more paragraph text. I don't want this indented, please.
Internal routines and switches of interest seem to be \#endpetrue, \#endparenv and others. Thanks for your help.
I couldn't get anything to work without redefining \end, but I'm certainly no expert.
The following is quite hacky, but worked in my limited testing. Of course this will interfere with nested environments (you should be able to redefine \begin to restore the old \end if you have problems).
\newenvironment{example}{%
\bgroup
\let\oldend=\end
\def\end##1{\oldend{##1}\csname #afterindentfalse\endcsname
\csname #afterheading\endcsname}
\begin{list}{}
{\setlength\leftmargin{2em}}
}{%
\end{list}
\egroup
}
Can't you avoid this by not having a blank line between your environment and the next line?
This is paragraph text. This is paragraph text, too.
\begin{example}
\item This is the first item in the list.
\item This is the second item in the list.
\end{example}
% (No blank line)
This is more paragraph text. I don't want this indented, please.
Something as simple as this works for me:
\makeatletter
\newenvironment{example}{%
\bgroup
\list{}{}
}{%
\endlist
\#afterindentfalse
\#afterheading
\egroup
}
\makeatother
But, it doesn't work before the first \section (or \chapter, in the case of classes "book" and "report") is called. I don't know why.
I tried the Ivan's answer, but it wasn't working for me. But I did get it working! Here's what I did:
\makeatletter
\renewenvironment{quotation}{%
\bgroup%
\let\oldend=\end%
\def\end##1{\oldend{##1}\csname #afterindentfalse\endcsname%
\csname #afterheading\endcsname}%
\list{}{\listparindent 1.5em%
\itemindent \listparindent%
\leftmargin 1.5em% This controls the size of the indentation
\rightmargin \leftmargin
\parsep \z# \#plus\p#}% This line reduces inter-paragraph space to normal values.
\item\relax%
}{%
\endlist%%
\egroup%
}
\makeatother
The advantage to this is that it typesets your blockquotes very nicely, and removes the indentation from paragraph after the blockquote.
You can do this without redefining \end
\makeatletter
\newenvironment{example}
{\begin{list}
{}
{\setlength\leftmargin{2em}}}
{\end{list}%
\def\if#endpe{%
\#doendpe
\let\par\##par
\iffalse}}
\makeatother
Explanation
\end changes \everypar after expanding \endexample. To make things even more complicated it sets \par to restore \everypar{}. Appearently \#doendpe is ment to make sure that there is no indentation if the paragraph continues after the environment, but to restore normal behavior if there is a \par (or empty line) after the environment.
You may want to avoid changing \end because it would have to be changed at the begining of the environment and may therefore disturb nested environments. Luckily the definition of \end contains \expandafter\endgroup\if#endpe. We can use \if#endpe as a hook to inject our code to the outer scope. After the \endgroup \if#endpe is automatically restored.
Include \#afterindentfalse\#afterheading at the end of your definition.
I had the same problem. I just used this:
\noindent \newenvironment
You should not mess with the \everypar token list, unless you know exactly what you are doing. Use
\setlength{\parindent}{0pt}
to get rid of indenting in the whole document.
ending your environment with \noindent could help you