I would like to indent the whole paragraph "lipsum[2]" but I am getting an "overfull \hbox" error and the paragraph goes out of the page's boundaries. How can I fix that? Thank you in advance!
\documentclass[jou]{apa7}
\usepackage{lipsum}
\title{Title of the paper}
\author{Author}
\begin{document}
\maketitle
\lipsum[1]
\hfill\begin{minipage}{\dimexpr\textwidth-3cm}
\lipsum[2]
\end{minipage}
\end{document}
You want to use \linewidth and not \textwidth:
\documentclass[jou]{apa7}
\usepackage{lipsum}
\title{Title of the paper}
\author{Author}
\begin{document}
\maketitle
\lipsum[1]
\hfill\begin{minipage}{\dimexpr\linewidth-3cm}
\lipsum[2]
\end{minipage}
\end{document}
Related
Hello I trying to list the subsections in table of contents (beamer), but I can't get the result ? Anyone knows how to do it ?
My code (I am using the \usetheme{CambridgeUS}):
\documentclass[handout,10pt,aspectratio=169]{beamer}
\usepackage[spanish]{babel}
\usepackage{multirow,rotating}
\usepackage{color}
\usepackage{hyperref}
\usepackage{tikz-cd}
\usepackage{array}
\usepackage{siunitx}
\usepackage{mathtools,nccmath}%
\usepackage{etoolbox, xparse}
\usecolortheme{dolphin}
\usepackage{lipsum}
\usepackage{natbib}
\usepackage{hyperref}
\usepackage{calc}
\usepackage{environ}
\usepackage{courier}
\usepackage{tcolorbox}
\usetheme{CambridgeUS}
\title[]{\textcolor{black}{\vskip 1.5cm\textbf {Title}}}
\begin{document}
\begin{frame}
\maketitle
\end{frame}
\begin{frame}
\frametitle{Contenido}
\tableofcontents
\end{frame}
\section{Introducción}
\begin{frame}{Introducción}
\subsection{sismos lentos}
\end{frame}
\end{document}
Never use sectioning commands like \section or \subsection within a frame. They must be used outside the frame.
Apart from this problem, you can use https://stackoverflow.com/a/74094309/2777074 to get squares in the toc:
\documentclass[handout,10pt,aspectratio=169]{beamer}
\usepackage[spanish]{babel}
\usepackage{multirow,rotating}
%\usepackage{color}
%\usepackage{hyperref}
\usepackage{tikz-cd}
\usepackage{array}
\usepackage{siunitx}
\usepackage{mathtools,nccmath}%
\usepackage{
%etoolbox,
xparse}
\usecolortheme{dolphin}
\usepackage{lipsum}
\usepackage{natbib}
%\usepackage{hyperref}
\usepackage{calc}
\usepackage{environ}
\usepackage{courier}
\usepackage{tcolorbox}
\usetheme{CambridgeUS}
\title[]{\textcolor{black}{\vskip 1.5cm\textbf {Title}}}
\setbeamertemplate{sections/subsections in toc}[square]
\begin{document}
\begin{frame}
\maketitle
\end{frame}
\begin{frame}
\frametitle{Contenido}
\tableofcontents
\end{frame}
\section{Introduccion}
\subsection{sismos lentos}
\begin{frame}{Introduccion}
\end{frame}
\end{document}
I have this LaTeX code and I was wondering how can I make the document title bold and larger in size than the default size.
\documentclass{article}
\title{Document Title}
\begin{document}
\maketitle
The content of the document goes here.
\end{document}
I've noticed that \maketitle renders the content that is specified above in the preamble.
You could redefine \#maketitle:
\documentclass{article}
\title{Document Title}
\makeatletter
\def\#maketitle{%
\newpage
\null
\vskip 2em%
\begin{center}%
\let \footnote \thanks
{\Huge\bfseries\#title \par}%
\vskip 1.5em%
{\large
\lineskip .5em%
\begin{tabular}[t]{c}%
\#author
\end{tabular}\par}%
\vskip 1em%
{\large \#date}%
\end{center}%
\par
\vskip 1.5em}
\makeatother
\begin{document}
\maketitle
The content of the document goes here.
\end{document}
I am trying to create a custom title page in LaTeX according to my organization's template (in Word).
I managed to get close to it with the following code:
\documentclass{report}
\usepackage[a4paper,twoside,bindingoffset=0cm,nomarginpar,includeheadfoot,headheight=1.25cm,headsep=0cm,top=1cm,bottom=1.8cm,inner=1.75cm,outer=1.75cm,showframe]{geometry}
\usepackage{xcolor}
\usepackage{colortbl}
\usepackage{calc}
\usepackage{graphicx}
\usepackage{tabularx}
\definecolor{greenBE}{RGB}{141,182,60}
\definecolor{blueBE}{RGB}{0,111,144}
\title{La qualité de l'air en Région de Bruxelles-Capitale}
\newcommand{\subtitle}{Rapport annuel 2019}
\author{}
\usepackage{lipsum}
\begin{document}
\makeatletter
\begin{titlepage}
\thispagestyle{empty}
\newlength{\rulewidth}\setlength{\rulewidth}{3cm}%
\newlength{\logowidth}\setlength{\logowidth}{2.5cm}%
\newlength{\logoheight}\setlength{\logoheight}{\logowidth*\ratio{592pt}{1538pt}}% image size : 1538 x 592
\begingroup
\setlength{\tabcolsep}{0pt}
\renewcommand{\arraystretch}{0}
\noindent%
\begin{tabularx}{\textwidth}{p{\rulewidth}c>{\centering}X}
\cellcolor{blueBE}&\includegraphics[width=\logowidth]{ILLU_FR_LogoBE.jpg}&\cellcolor{greenBE}\color{white}{RAPPORT TECHNIQUE}
\end{tabularx}
\endgroup
\vspace*{3cm}
\color{blueBE}
\raggedleft\MakeUppercase{\Large\textbf{\#title}}\\
~\\
\raggedleft\large\textbf{\subtitle}
\vfill
\raggedleft\MakeUppercase{\Large\#date}\\
\vspace*{4cm}
\noindent%
\color{blueBE}{\rule{\textwidth}{\logoheight}}
\end{titlepage}
\makeatother
\restoregeometry
\tableofcontents
\chapter{Prerequisites}\label{prerequisites}
\lipsum
\end{document}
and the image logo ILLU_FR_LogoBE.jpg
However, as you can notice below, the text "RAPPORT TECHNIQUE" on top of the first page is enlarging the height of the row. Instead, I would like to center it vertically in the middle of the logo.
What am I doing wrong ?
Many thanks,
Alessandro
You could use \usepackage[export]{adjustbox} and then play around with different valign options for the graphic.
\documentclass{report}
\usepackage[a4paper,twoside,bindingoffset=0cm,nomarginpar,includeheadfoot,headheight=1.25cm,headsep=0cm,top=1cm,bottom=1.8cm,inner=1.75cm,outer=1.75cm,showframe]{geometry}
\usepackage{xcolor}
\usepackage{colortbl}
\usepackage{calc}
\usepackage{graphicx}
\usepackage{tabularx}
\definecolor{greenBE}{RGB}{141,182,60}
\definecolor{blueBE}{RGB}{0,111,144}
\title{La qualité de l'air en Région de Bruxelles-Capitale}
\newcommand{\subtitle}{Rapport annuel 2019}
\author{}
\usepackage{lipsum}
\usepackage[export]{adjustbox}
\begin{document}
\makeatletter
\begin{titlepage}
\thispagestyle{empty}
\newlength{\rulewidth}\setlength{\rulewidth}{3cm}%
\newlength{\logowidth}\setlength{\logowidth}{2.5cm}%
\newlength{\logoheight}\setlength{\logoheight}{\logowidth*\ratio{592pt}{1538pt}}% image size : 1538 x 592
\begingroup
\setlength{\tabcolsep}{0pt}
%\renewcommand{\arraystretch}{0}
\noindent%
\begin{tabularx}{\textwidth}{p{\rulewidth}c>{\centering}X}
\cellcolor{blueBE}&\includegraphics[width=\logowidth,valign=t]{ILLU_FR_LogoBE.jpg}&\cellcolor{greenBE}\color{white}RAPPORT TECHNIQUE
\end{tabularx}%
\endgroup
\vspace*{3cm}
\color{blueBE}
\raggedleft\MakeUppercase{\Large\textbf{\#title}}\\
~\\
\raggedleft\large\textbf{\subtitle}
\vfill
\raggedleft\MakeUppercase{\Large\#date}\\
\vspace*{4cm}
\noindent%
\color{blueBE}{\rule{\textwidth}{\logoheight}}
\end{titlepage}
\makeatother
\restoregeometry
\tableofcontents
\chapter{Prerequisites}\label{prerequisites}
\lipsum
\end{document}
I write an article, which is divided into two columns separated by a line. I use multicol package. I want to insert figures and align them to the top or to the down of the page in multicols environment. Figures can be inserted by the use of minipage environment by i don't know how to align them up or down. figure environment does not work in multicols environment.
\documentclass{article}
\usepackage{geometry}
\usepackage{multicol}
\usepackage{graphicx}
\usepackage{lipsum}
\usepackage{caption}
\geometry{margin=0.75in}
\begin{document}
\begin{multicols}{2}
\lipsum[1-3]
\vfill
\begin{minipage}{\linewidth}
\centering
\includegraphics[width=\linewidth]{beta_glucan.png}
\captionof{figure}{Figure caption}
\end{minipage}
\lipsum[1-3]
\end{multicols}
\end{document}
Any help will be appreciated cause I have been loosing time at it since friday.
Non-multicols solution:
\documentclass[twocolumn]{article}
\usepackage{geometry}
%\usepackage{multicol}
\usepackage{graphicx}
\usepackage{lipsum}
\usepackage{caption}
\usepackage{float}
\geometry{margin=0.75in}
\setlength{\columnseprule}{0.4pt}
\begin{document}
% \begin{multicols}{2}
\lipsum[1-3]
\begin{figure}[tb]
\centering
\includegraphics[width=\linewidth]{example-image}
\caption{Figure caption}
\end{figure}
\lipsum[1-3]
% \end{multicols}
\end{document}
I'm trying to vertically center a title on a custom-sized page with latex. I've written the following code, but for some reason it doesn't center. Could someone please point me to what's wrong with it?
Thanks!
\documentclass{article}
\setlength{\pdfpagewidth}{88.184mm}
\setlength{\pdfpageheight}{113.854mm}
\usepackage[margin=0.5cm, paperwidth=88.184mm, paperheight=113.854mm]{geometry}
\title{[[title]]}
\date{[[date]]}
\author{[[author]]}
\begin{document}
\vspace{\fill}
\maketitle
\vspace{\fill}
\newpage
[[text]]
\end{document}
There are two small bugs in your code.
First, if you want the \vspace to work at the beginning or end of a page, you should use the starred version (\vspace*).
This would work, but \maketitle is a pretty complicated macro, and if used like in your example, it just puts the title at the second page. You can use the titlepage environment, which gives you much more command over how the title page looks like -- including the spacing. For example, you could use the following code:
\documentclass{article}
\setlength{\pdfpagewidth}{88.184mm}
\setlength{\pdfpageheight}{113.854mm}
\usepackage[margin=0.5cm, paperwidth=88.184mm, paperheight=113.854mm]{geometry}
\begin{document}
\begin{titlepage}
\vspace*{\fill}
\begin{center}
{Huge [[title]]}\\[0.5cm]
{Large [[author}\\[0.4cm]
[[date]]
\end{center}
\vspace*{\fill}
\end{titlepage}
[[text]]
\end{document}
\null % Empty line
\nointerlineskip % No skip for prev line
\vfill
\let\snewpage \newpage
\let\newpage \relax
\maketitle
\let \newpage \snewpage
\vfill
\break % page break
If you want to make everything work even with \maketitle put your \vspace*{\fill} inside the first and the last attribute, exp:
\title{**\vspace*{\fill}**[[title]]}
\date{[[date]]}
\author{[[author]]**\vspace*{\fill}**[[}
\begin{document}
\maketitle
\newpage
[[text]]
\end{document}
As in the answer by finrod, \maketitle is a pretty complicated macro, this is why I didn't feel like overwriting it myself (\renewcommand\maketitle{...). Nevertheless, copying, pasting and editing lines 170-201 of article.cls documentclass, I could add a new one to customize (\newcommand\mymaketitle{...) as follows:
\documentclass{article}
\setlength{\pdfpagewidth}{88.184mm}
\setlength{\pdfpageheight}{113.854mm}
\usepackage[margin=0.5cm, paperwidth=88.184mm, paperheight=113.854mm]{geometry}
\title{Title}
\date{Date}
\author{Author}
\makeatletter
\newcommand\mymaketitle{%
\begin{titlepage}
\null\vfil\vskip 40\p#
\begin{center}
{\LARGE \#title \par}
\vskip 2.5em
{\large \lineskip .75em \#author \par}
\vskip 1.5em
{\large \#date \par}
\end{center}\par
\#thanks
\vfil\null
\end{titlepage}
}
\makeatother
\begin{document}
\mymaketitle
Text
\end{document}
The output: