Hello I trying to list the subsections in table of contents (beamer), but I can't get the result ? Anyone knows how to do it ?
My code (I am using the \usetheme{CambridgeUS}):
\documentclass[handout,10pt,aspectratio=169]{beamer}
\usepackage[spanish]{babel}
\usepackage{multirow,rotating}
\usepackage{color}
\usepackage{hyperref}
\usepackage{tikz-cd}
\usepackage{array}
\usepackage{siunitx}
\usepackage{mathtools,nccmath}%
\usepackage{etoolbox, xparse}
\usecolortheme{dolphin}
\usepackage{lipsum}
\usepackage{natbib}
\usepackage{hyperref}
\usepackage{calc}
\usepackage{environ}
\usepackage{courier}
\usepackage{tcolorbox}
\usetheme{CambridgeUS}
\title[]{\textcolor{black}{\vskip 1.5cm\textbf {Title}}}
\begin{document}
\begin{frame}
\maketitle
\end{frame}
\begin{frame}
\frametitle{Contenido}
\tableofcontents
\end{frame}
\section{Introducción}
\begin{frame}{Introducción}
\subsection{sismos lentos}
\end{frame}
\end{document}
Never use sectioning commands like \section or \subsection within a frame. They must be used outside the frame.
Apart from this problem, you can use https://stackoverflow.com/a/74094309/2777074 to get squares in the toc:
\documentclass[handout,10pt,aspectratio=169]{beamer}
\usepackage[spanish]{babel}
\usepackage{multirow,rotating}
%\usepackage{color}
%\usepackage{hyperref}
\usepackage{tikz-cd}
\usepackage{array}
\usepackage{siunitx}
\usepackage{mathtools,nccmath}%
\usepackage{
%etoolbox,
xparse}
\usecolortheme{dolphin}
\usepackage{lipsum}
\usepackage{natbib}
%\usepackage{hyperref}
\usepackage{calc}
\usepackage{environ}
\usepackage{courier}
\usepackage{tcolorbox}
\usetheme{CambridgeUS}
\title[]{\textcolor{black}{\vskip 1.5cm\textbf {Title}}}
\setbeamertemplate{sections/subsections in toc}[square]
\begin{document}
\begin{frame}
\maketitle
\end{frame}
\begin{frame}
\frametitle{Contenido}
\tableofcontents
\end{frame}
\section{Introduccion}
\subsection{sismos lentos}
\begin{frame}{Introduccion}
\end{frame}
\end{document}
Related
I'm using the beamer class to create slides and using the lstlisting package inside a colorbox. Below is a reproducible example showing my problem when using pdflatex. I'm trying to use quotes (") as in the line read.csv(c:'//path') and the compiler breaks. Things works when the quotes are removed.
Does anyone see a way to solve that problem?
\documentclass[]{beamer}
\usepackage{colortbl}
\usepackage{bm}
\usepackage{color}
\usepackage{amssymb,amsmath}
\usepackage{mathtools}
\usepackage{float}
\usepackage{algorithm}
\usepackage[noend]{algpseudocode}
\usepackage{listings}
\lstset{basicstyle=\ttfamily}
\usepackage{tcolorbox}
\usepackage{graphicx}
\usepackage{fancybox}
\usepackage{hyperref}
% For formatting R code
\lstset{language=R,
basicstyle=\small\ttfamily,
stringstyle=\color{DarkGreen},
otherkeywords={0,1,2,3,4,5,6,7,8,9},
morekeywords={TRUE,FALSE},
deletekeywords={data,frame,length,as,character},
keywordstyle=\color{blue},
commentstyle=\color{DarkGreen},
xleftmargin=.0in,
breaklines=true,
xrightmargin=.25in
}
\newcommand{\qq}{\symbol{34}}
%\documentclass[handout]{beamer}
\mode<handout>
{
\usetheme{default}
}
\mode<presentation>
{
\usetheme{Madrid}
%\usetheme{default}
}
\usepackage[english]{babel}
\usepackage[latin1]{inputenc}
%\usepackage{SweaveSlides}
\usepackage{bm}
\usepackage{graphicx}
\usefonttheme[onlymath]{serif}
%\logo{\includegraphics[width=3cm]{logo.jpeg}}
\title{Title}
\author {Name\\Place}
\institute[Place]{
}
\date[Test]{Test}
\subject{OP}
\AtBeginSubsection[]%
{
\begin{frame}<beamer>
\frametitle{Outline}
\tableofcontents[currentsection,currentsubsection]
\end{frame}
}
\begin{document}
\begin{frame}
\titlepage
\end{frame}
\begin{frame}[fragile]
\frametitle{Title}
\begin{itemize}
\item Item 1
\end{itemize}
\begin{tcolorbox}[colback=red!5,colframe=red!75!black,title=Reading in a .csv File]
\lstset{tabsize=2}
\begin{lstlisting}
read.csv('c://test')
\end{lstlisting}
\end{tcolorbox}
\end{frame}
\end{document}
I am preparing my thesis defense slides and I can't remove the numbering from the slide that displays the name of the sub-section (slide 5 and 7).
I have tried to modify the metropolis template I am using, but without success.
Is there anyone who knows how to do this?
Thank you very much for your help!
\documentclass{beamer}
\usetheme[progressbar=frametitle, sectionpage=progressbar, subsectionpage=progressbar, block=fill]{metropolis}
\setbeamertemplate{footline}{}
\setbeamertemplate{navigation symbols}{%
\ifnum\insertframenumber>0
\normalsize\insertframenumber%
\fi%
}
\title{Title}
\subtitle{Sub-title}
\date{\today}
\author{author}
\institute{institute}
\AtBeginSection[]
{
\setbeamertemplate{navigation symbols}{}
\frame[plain,c,noframenumbering]{
\sectionpage
\tableofcontents[currentsection,subsectionstyle=hide]}
\setbeamertemplate{navigation symbols}{\normalsize\insertframenumber}
}
\makeatletter
\setbeamertemplate{section in toc}[sections numbered]
\setbeamertemplate{subsection in toc}[subsections numbered]
\makeatother
\begin{document}
\maketitle
\section{First section}
\begin{frame}
Content
\end{frame}
\section{Second section}
\subsection{First sub section}
\begin{frame}
Content
\end{frame}
\subsection{Second sub section}
\begin{frame}
Content
\end{frame}
\section{Third section}
\end{document}
Funny coincidence, I just answered basically the same problem a couple of hours ago at https://topanswers.xyz/tex?q=2047#a2293
\documentclass{beamer}
\usetheme[progressbar=frametitle, sectionpage=progressbar, subsectionpage=progressbar, block=fill]{metropolis}
\setbeamertemplate{footline}{}
\setbeamertemplate{navigation symbols}{\normalsize\insertframenumber}
\title{Title}
\subtitle{Sub-title}
\date{\today}
\author{author}
\institute{institute}
\AtBeginSection[]
{
\setbeamertemplate{navigation symbols}{}
\frame[plain,c,noframenumbering]{
\sectionpage
\tableofcontents[currentsection,subsectionstyle=hide]}
\setbeamertemplate{navigation symbols}{\normalsize\insertframenumber}
}
\makeatletter
\setbeamertemplate{section in toc}[sections numbered]
\setbeamertemplate{subsection in toc}[subsections numbered]
\patchcmd{\ps#empty}{\usebeamertemplate***{navigation symbols}}{}{}{}
\makeatother
\begin{document}
\maketitle
\section{First section}
\begin{frame}
Content
\end{frame}
\section{Second section}
\subsection{First sub section}
\begin{frame}
Content
\end{frame}
\subsection{Second sub section}
\begin{frame}
Content
\end{frame}
\section{Third section}
\end{document}
I am trying to create a custom title page in LaTeX according to my organization's template (in Word).
I managed to get close to it with the following code:
\documentclass{report}
\usepackage[a4paper,twoside,bindingoffset=0cm,nomarginpar,includeheadfoot,headheight=1.25cm,headsep=0cm,top=1cm,bottom=1.8cm,inner=1.75cm,outer=1.75cm,showframe]{geometry}
\usepackage{xcolor}
\usepackage{colortbl}
\usepackage{calc}
\usepackage{graphicx}
\usepackage{tabularx}
\definecolor{greenBE}{RGB}{141,182,60}
\definecolor{blueBE}{RGB}{0,111,144}
\title{La qualité de l'air en Région de Bruxelles-Capitale}
\newcommand{\subtitle}{Rapport annuel 2019}
\author{}
\usepackage{lipsum}
\begin{document}
\makeatletter
\begin{titlepage}
\thispagestyle{empty}
\newlength{\rulewidth}\setlength{\rulewidth}{3cm}%
\newlength{\logowidth}\setlength{\logowidth}{2.5cm}%
\newlength{\logoheight}\setlength{\logoheight}{\logowidth*\ratio{592pt}{1538pt}}% image size : 1538 x 592
\begingroup
\setlength{\tabcolsep}{0pt}
\renewcommand{\arraystretch}{0}
\noindent%
\begin{tabularx}{\textwidth}{p{\rulewidth}c>{\centering}X}
\cellcolor{blueBE}&\includegraphics[width=\logowidth]{ILLU_FR_LogoBE.jpg}&\cellcolor{greenBE}\color{white}{RAPPORT TECHNIQUE}
\end{tabularx}
\endgroup
\vspace*{3cm}
\color{blueBE}
\raggedleft\MakeUppercase{\Large\textbf{\#title}}\\
~\\
\raggedleft\large\textbf{\subtitle}
\vfill
\raggedleft\MakeUppercase{\Large\#date}\\
\vspace*{4cm}
\noindent%
\color{blueBE}{\rule{\textwidth}{\logoheight}}
\end{titlepage}
\makeatother
\restoregeometry
\tableofcontents
\chapter{Prerequisites}\label{prerequisites}
\lipsum
\end{document}
and the image logo ILLU_FR_LogoBE.jpg
However, as you can notice below, the text "RAPPORT TECHNIQUE" on top of the first page is enlarging the height of the row. Instead, I would like to center it vertically in the middle of the logo.
What am I doing wrong ?
Many thanks,
Alessandro
You could use \usepackage[export]{adjustbox} and then play around with different valign options for the graphic.
\documentclass{report}
\usepackage[a4paper,twoside,bindingoffset=0cm,nomarginpar,includeheadfoot,headheight=1.25cm,headsep=0cm,top=1cm,bottom=1.8cm,inner=1.75cm,outer=1.75cm,showframe]{geometry}
\usepackage{xcolor}
\usepackage{colortbl}
\usepackage{calc}
\usepackage{graphicx}
\usepackage{tabularx}
\definecolor{greenBE}{RGB}{141,182,60}
\definecolor{blueBE}{RGB}{0,111,144}
\title{La qualité de l'air en Région de Bruxelles-Capitale}
\newcommand{\subtitle}{Rapport annuel 2019}
\author{}
\usepackage{lipsum}
\usepackage[export]{adjustbox}
\begin{document}
\makeatletter
\begin{titlepage}
\thispagestyle{empty}
\newlength{\rulewidth}\setlength{\rulewidth}{3cm}%
\newlength{\logowidth}\setlength{\logowidth}{2.5cm}%
\newlength{\logoheight}\setlength{\logoheight}{\logowidth*\ratio{592pt}{1538pt}}% image size : 1538 x 592
\begingroup
\setlength{\tabcolsep}{0pt}
%\renewcommand{\arraystretch}{0}
\noindent%
\begin{tabularx}{\textwidth}{p{\rulewidth}c>{\centering}X}
\cellcolor{blueBE}&\includegraphics[width=\logowidth,valign=t]{ILLU_FR_LogoBE.jpg}&\cellcolor{greenBE}\color{white}RAPPORT TECHNIQUE
\end{tabularx}%
\endgroup
\vspace*{3cm}
\color{blueBE}
\raggedleft\MakeUppercase{\Large\textbf{\#title}}\\
~\\
\raggedleft\large\textbf{\subtitle}
\vfill
\raggedleft\MakeUppercase{\Large\#date}\\
\vspace*{4cm}
\noindent%
\color{blueBE}{\rule{\textwidth}{\logoheight}}
\end{titlepage}
\makeatother
\restoregeometry
\tableofcontents
\chapter{Prerequisites}\label{prerequisites}
\lipsum
\end{document}
When using \cite in a caption for a figure, the citation shows up as the citation number in the caption (as it should) but as text in the list of figures. I never ran into this problem before so I'm not sure what's going on.
\documentclass[11pt]{article}
\usepackage[utf8]{inputenc}
\usepackage{hyperref}
\usepackage{graphicx}
\usepackage{fullpage}
\usepackage{subcaption}
\usepackage{natbib}
\usepackage{multirow}
\usepackage{amsmath}
\usepackage{float}
\usepackage{comment}
\usepackage[table,xcdraw]{xcolor}
\usepackage{pdfpages}
\usepackage{makecell}
\usepackage{textcomp}
\usepackage{siunitx}
\usepackage{graphicx,changepage}
\usepackage{setspace}
\usepackage{chngcntr}
\usepackage{verbatim}
\usepackage{listings}
\usepackage{booktabs}
\usepackage{pgfplots}
\usepackage[thinlines]{easytable}
\usepackage{tabularx}
\usepackage{tocloft}
\usepackage[normalem]{ulem}
\begin{document}
\makeatletter
\renewcommand{\l#table}{\#dottedtocline{1}{1.5em}{2.5em}}
\makeatother
\listoftables
\begin{figure}[H]
\centering
\includegraphics [width=0.7\textwidth] {Images/cnc-processing-center-centateq-p-110_01.jpg}
\caption{Homag Centateq P-110 \cite{HOMAG}}
\label{fig:cnc_mill}
\end{figure}
\end{document}
i tried compiling your code on overleaf, to do that, i added some lines on your code as is show following:
\documentclass[11pt]{article}
\usepackage[utf8]{inputenc}
\usepackage{hyperref}
\usepackage{graphicx}
\usepackage{fullpage}
\usepackage{subcaption}
\usepackage{natbib}
\usepackage{multirow}
\usepackage{amsmath}
\usepackage{float}
\usepackage{comment}
\usepackage[table,xcdraw]{xcolor}
\usepackage{pdfpages}
\usepackage{makecell}
\usepackage{textcomp}
\usepackage{siunitx}
\usepackage{graphicx,changepage}
\usepackage{setspace}
\usepackage{chngcntr}
\usepackage{verbatim}
\usepackage{listings}
\usepackage{booktabs}
\usepackage{pgfplots}
\usepackage[thinlines]{easytable}
\usepackage{tabularx}
\usepackage{tocloft}
\usepackage[normalem]{ulem}
\begin{document}
\makeatletter
\renewcommand{\l#table}{\#dottedtocline{1}{1.5em}{2.5em}}
\makeatother
\listoftables
\listoffigures %added to provide a list of figures
\begin{figure}[H]
\centering
\includegraphics [width=0.7\textwidth] {test.pdf}
\caption{Homag Centateq P-110 \cite{HOMAG}}
\label{fig:cnc_mill}
\end{figure}
\begin{thebibliography}{9} % Added the thebibliography enviromment to use Homag as exemple.
\bibitem{HOMAG}
Homag.
\end{thebibliography}
\end{document}
As is shown on the figure above, the list of figures is like you want. I suspect that you have troubles with your LaTex compiler, try do a upgrade on your compiler or use another, like overleaf.
I would like to indent the whole paragraph "lipsum[2]" but I am getting an "overfull \hbox" error and the paragraph goes out of the page's boundaries. How can I fix that? Thank you in advance!
\documentclass[jou]{apa7}
\usepackage{lipsum}
\title{Title of the paper}
\author{Author}
\begin{document}
\maketitle
\lipsum[1]
\hfill\begin{minipage}{\dimexpr\textwidth-3cm}
\lipsum[2]
\end{minipage}
\end{document}
You want to use \linewidth and not \textwidth:
\documentclass[jou]{apa7}
\usepackage{lipsum}
\title{Title of the paper}
\author{Author}
\begin{document}
\maketitle
\lipsum[1]
\hfill\begin{minipage}{\dimexpr\linewidth-3cm}
\lipsum[2]
\end{minipage}
\end{document}