I am attempting to follow the Hello World example for deploying an AWS Serverless Application, but I get a Security Constraints Not Satisfied Error when using sam deploy --guided. I'm pressing Enter at each prompt to accept the defaults per the tutorial.
The curious bit--to me--is if I use the AWS Toolkit extension for VS Code to deploy the app it works fine, so I don't think it has anything to do with my IAM permission config, but I'm new to this so I'm not ruling it out.
Recently the guided deploy was updated to include a prompt confirming if you were ok with not having any authorization defined. At the same time, a check was added that would fail the guided deploy if you answer 'No'. (See the relevant part of the commit here.)
This means that, as of this commit, you can't go through the AWS Hello World tutorial by responding with Enter to accept the default options.
To successfully deploy from the command line you'll need to confirm 'Yes' that you're ok with not having any authorization defined, and then it should work as expected.
During your sam deploy --guided, at the following question you need to answer YES.
OR
You can do sam deploy which skip that
Related
With Eclipse Che, I've recently been able to deploy the docker container without any issue as provided in the instructions.
I'm at the point where am trying to learn a bit more about extension development for Che, and I'm going through the small introduction on "developing your first plugin" located on the following page:
https://www.eclipse.org/che/docs/che-in-che-quickstart.html
I'm stuck at the point where I can successfully build and deploy the sample project by executing the Traefik Start, Tomcat8-IDE Start, Deploy IDE and Deploy Workspace Agent commands.
But when it comes time to navigate to the newly created 2nd workspace by clicking on the link provided in the IDE to go to the newly created 2nd workplace instance...:
... I end up getting redirected to the following error page:
I suspect that there may be some kind of configuration problem with the sample plugin project, or configuration problem with keycloak, but I'm at the point where I don't really know how to proceed in terms of troubleshooting.
(Update: 2018/07/31)
At request of #kalrsson for more information, below is a screenshot of the che-public client configuration in my Keycloak instance.
(SOLUTION Update: 2018/08/01)
Thanks to #kalrsson for pointing me in the right direction.
At first I tried only adding the needed URL to the "Valid Redirect URIs" list. Doing so allowed me to get past the issue were I was receiving the error "Invalid parameter: redirect_uri". However, this only presented me with a blank page. On this blank page, when I inspect the web browser console, I noticed the following error:
From there, I also tried to add the needed URL to WebOrigins in KeyCloak as seen below.
Doing this finally allowed me to fully load and render the secondary workspace
Can you go to keycloak_ip:5050/auth, login as admin/admin, clients, che-public, and the IP you use to redirect urls and webOrigins?
So, you need to previewURL:port both to redirectURIs and webOrigins
I am trying to clone a project from my bitbucket to my computer, using SourceTree.
I tried to do so from the web interface :
But it always failed.
Here is the details of the error.
Can you help me please ?
Update: As mentioned below an update (1.6.25) has been released which fixes this error.
Original: Authentication in Version 1.6.24 of SourceTree is currently not working well. Use version 1.6.23 instead. You can find it here: http://downloads.atlassian.com/software/sourcetree/windows/SourceTreeSetup_1.6.23.exe
Enjoy:)
Yes, the problem is with Askpass.exe
We recently changed the logging framework we used to slf4net/log4net and this, unexpectedly is being picked up by askpass.exe.
But unfortunately since askpass.exe has no configuration in place it logs some output to stdout by default, this is interfering with the expected stdout output from askpass.exe.
We will release a 1.6.25 tomorrow with a proper fix.
Work Around
As a temporary workaround copying the attached Askpass.exe.config file in to
C:\Program Files (x86)\Atlassian\SourceTree
will provide the necessary configuration and should fix the multiple authentication requests.
You may find that unfortunately SourceTree has deleted what it thought were 'failing' passwords. Apologies for this you will need to re-enter them.
You can see the issue on Atlassian's own Jira: SRCTREEWIN-3944
Edit: Said update appears to be available now.
Help > Check for Updates > Update
Worked for me
It is because of the update which is the Two-step verification. I suggest you read this first to read more about their update and then you proceed over here. I was able to change my default HTTPS protocol to SSH protocol by following the steps above.
I am trying to setup a CI server on my Macbook, I have followed the documentation on the apple website up to the point of creating a bot and integrating my build. When I attempt to integrate the build I repeatedly get the following error:
Bot Issue: error. Build Service Error.
Issue: '/Library/Developer/XcodeServer/Integrations/Caches/14a8ea2a72904f1abcecd38b1c02196b' exists and is not an empty directory (-4).
Integration Number: 13.
Integration URL: https://DavidMcQueens-MacBook-Pro-2.local/xcode/bots/BF817C9/integrations
Description: '/Library/Developer/XcodeServer/Integrations/Caches/14a8ea2a72904f1abcecd38b1c02196b' exists and is not an empty directory (-4).
I have manually deleted the folders in this location, as well as changing the permissions incase the server was having issues writing. Each time I run, I receive the same error. Even after I have deleted the folder so it is empty before the integration.
Does anyone have any ideas on how to solve this issue? I have built my iOS application in Swift (which I believe should still work with the CI server)
I am running OSX Server 4.0 and the latest version of XCode.
I followed Apple's documentation for creating bots
Thanks,
EDIT:
After some experimenting and trying different things to see what the issue is, I disabled 2-factor authentication on my GitHub hosting. This appeared to solve the issue, despite the fact that I was generating a specific application key to get around 2-factor. It solved the issue for a small amount of time, and I managed to successfully get the bot to integrate a few times. However it appears to have gone back to its old tricks.
If anyone has any other knowledge on this, or has managed to get it working on their own machines it will be good to know.
So I believe I have solved this issue, the GitHub 2-factor authentication issue looks to be a red herring.
When setting up the bot, there is a section that says "Checkout the repository", I did not do this step because I already had the repository on my local machine and presumed that it would simply create the repository in another location, and server no other purpose.
However, after some investigation this step is very necessary. From what I understand, checking out the repository does create it again in another location, however this is necessary as this new repository is where the Bot's will pull changes into and build in order to perform the tests. I was trying to use the same repo for development and for the Bots, which it did not like.
Creating a clean checkout of the project (on the server), and configuring the bots in that project then allowed me to progress and get everything setup correctly. It comes down to user error. In hindsight, it makes perfect sense to have a separate repo for the bots (this is my first CI server setup), however the error messages were not helpful and I can't remember seeing this emphasised in the setup guide.
I am currently going through a tutorial with Ruby On Rails through a third party code editor.
It's currently walking me through through the process of getting my stuff onto a git repository and I have set up an SSH key from within the terminal of the online code editor itself. (not my computers code editor)
Using the command cat ~/.ssh/id_rsa.pub I accidentally printed it onto the console and am worried about security. It was the only way I could carry on with the tutorial. I did manage to push my application to the repo successfully. Is it wise to generate SSH Keys through other online code editors? Does it matter?
Any help and advice is greatly appreciated.
Thanks
Dan
I'm new to openstack, I have just installed and configured Swift using vmware. Followed this instruction: http://docs.openstack.org/developer/swift/development_saio.html
Right now SAIO uses tempauth to authenticate, I am able to access the cloud using cURL and swift commands. But I'm trying to use jclouds to do the job instead: https://jclouds.apache.org/guides/openstack/#install
However, I can't make the tempauth work, some said its not supported.
I tried to find guides to install keystone auth instead, but to no avail; I already messed up the configuration of SAIO a few times.
Is there any good guide that follows the installation of SAIO?
Do yourself a favour and skip SAIO, use DevStack instead.
Follow the instructions in this blog post
http://blog.phymata.com/2014/04/18/devstack-icehouse-on-the-rackspace-cloud/
It works just as well in a VMWare VM as in a Rackspace Cloud Server. If you really only want Swift+Keystone, delete all of the ENABLED_SERVICES lines except for
ENABLED_SERVICES=rabbit,mysql,key
ENABLED_SERVICES+=,s-proxy,s-object,s-container,s-account
ENABLED_SERVICES+=,horizon
I left Horizon in there as it can be helpful to have the dashboard handy.
You'll also want to delete the IMAGE_URLS lines. They won't be used.