With Eclipse Che, I've recently been able to deploy the docker container without any issue as provided in the instructions.
I'm at the point where am trying to learn a bit more about extension development for Che, and I'm going through the small introduction on "developing your first plugin" located on the following page:
https://www.eclipse.org/che/docs/che-in-che-quickstart.html
I'm stuck at the point where I can successfully build and deploy the sample project by executing the Traefik Start, Tomcat8-IDE Start, Deploy IDE and Deploy Workspace Agent commands.
But when it comes time to navigate to the newly created 2nd workspace by clicking on the link provided in the IDE to go to the newly created 2nd workplace instance...:
... I end up getting redirected to the following error page:
I suspect that there may be some kind of configuration problem with the sample plugin project, or configuration problem with keycloak, but I'm at the point where I don't really know how to proceed in terms of troubleshooting.
(Update: 2018/07/31)
At request of #kalrsson for more information, below is a screenshot of the che-public client configuration in my Keycloak instance.
(SOLUTION Update: 2018/08/01)
Thanks to #kalrsson for pointing me in the right direction.
At first I tried only adding the needed URL to the "Valid Redirect URIs" list. Doing so allowed me to get past the issue were I was receiving the error "Invalid parameter: redirect_uri". However, this only presented me with a blank page. On this blank page, when I inspect the web browser console, I noticed the following error:
From there, I also tried to add the needed URL to WebOrigins in KeyCloak as seen below.
Doing this finally allowed me to fully load and render the secondary workspace
Can you go to keycloak_ip:5050/auth, login as admin/admin, clients, che-public, and the IP you use to redirect urls and webOrigins?
So, you need to previewURL:port both to redirectURIs and webOrigins
Related
We tried to load scripts but something went wrong.
Please make sure that your network settings allow you to download scripts from the following domain:
https://aid-frontend.prod.atl-paas.net/atlassian-id/front-end/4.5.0
Tried Google Chrome, Firefox, Internet explorer also tried with different PC.
Not able to login into bitbucket
I'm using Chrome Version 77.0.3865.120 (Official Build) (64-bit). I got the same error trying to log in to my group's Atlassian site, and I was able to fix it by specifically allowing JavaScript from Atlassian:
Open Chrome settings
Click on Advanced
Click on Privacy and Security
Click on Site Settings
Click on JavaScript
Make sure JavaScript is set to allowed
Next to Allow, click Add
Paste the URL from the error message in and click Add
I've faced a similar problem recently while traveling and trying to work from a new location.
First I've tried the steps from the previous answer which unfortunately didn't help me (but they definitely may be useful in a different case scenario).
I'm renting a house with an existing pre-configured WIFI router which I could get an access to manage it over the web UI.
I'm not sure which of the following helped me. I did the following changes to the router configuration:
Added the 8.8.8.8 as a primary DNS Server
Enabled IPV6
Disabled the built-in firewall (this one is the more likely one which fixed the issue)
In a test, I click a link (SSL Cert) link that does not actually load the expected URL page. It hangs and as far as I can tell no issues when I look at network or console. Is there a known issue with TestCafe and clicking certain kinds of links. Clicking the same link with Selenium and Robot Framework successfully takes you to the expected URL.
This information is not sufficient to reproduce the problem. Please create a separate issue in the TestCafe Github repository using the following form
I would appreciate it if you provide us with your project or url to your site and your test code. It will help us determine the cause of the issue efficiently.
I am trying to create a bot using OSX Server 4.0 and Xcode 6.4.
My project encompasses multiple repositories and uses additional libraries as submodules. When I go to "Product > Create Bot," A dialog appears, saying "Provide repository credentials for this bot."
The dialog shows all of the repositories which I use as submodules. If I attempt to authenticate them by either SSH or https, xcode rejects my credentials.
When I click "Ignore" and finish the setup process, it says "Bot creation failed with error: Internal Error Creating Bot" and gives me no other information.
As a test, I have successfully created a sample project in github which I can create a bot for without a problem. I have tried to add submodules to the sample project and it still can create bots fine.
Can anyone help fix this?
I figured out the answer.
The problem ended up being GitSlave (http://gitslave.sourceforge.net/) which my team was using to keep our repositories updated. Something about the way GitSlave set up the repositories causes Xcode bots to fail with an internal error.
My issues accessing the repositories were unrelated to the internal error and were fixed by creating a new set of SSH keys for the bot instead of using my personal SSH keys, which had different permissions.
Hope this helps anyone else having this problem!
I managed to get past the "provide credentials" dialog, but Xcode Bots would fail with the same "Internal Error Creating Bot" error once I had stepped all the way through the wizard and clicked "Create".
The solution in my case was to change the remote.origin.url setting for my repository from a git#github.com SSH URL to a https://github.com HTTPS URL, and suddenly it just worked.
(This is kind of maddening because I checked every log file and every place where there might be an error report and found nothing. Figured it out through trial and error)
I had created a web application and committed the code in CVS. The web application is working good in my machine. When i tried to import the same code in another machine i am getting 404 error. I tried importing the code via ftp from my machine to another machine and also checking out the code from CVS. But still i get 404 error.
I also noticed that there is no error that had been captured in the console or in the application's log. Could someone help me in how to proceed further in identifying the issue. Please let me know if i need to post any further details regarding the issue.
I notice this issue to be in the Websphere server. I tried hosting the application in different machine and found that in few machine the same code is working good and some it is not. Is there any way to compare the server configuration?
In the WAS server 6.1 i added the below value in the web container and the application worked fine.
Steps:
In the server admin console, click on Application Server--> --> Web container--> custom properties.
Add the name as com.ibm.ws.webcontainer.invokefilterscompatibility and value as true.
Thank you all for the response.
I am trying to setup a CI server on my Macbook, I have followed the documentation on the apple website up to the point of creating a bot and integrating my build. When I attempt to integrate the build I repeatedly get the following error:
Bot Issue: error. Build Service Error.
Issue: '/Library/Developer/XcodeServer/Integrations/Caches/14a8ea2a72904f1abcecd38b1c02196b' exists and is not an empty directory (-4).
Integration Number: 13.
Integration URL: https://DavidMcQueens-MacBook-Pro-2.local/xcode/bots/BF817C9/integrations
Description: '/Library/Developer/XcodeServer/Integrations/Caches/14a8ea2a72904f1abcecd38b1c02196b' exists and is not an empty directory (-4).
I have manually deleted the folders in this location, as well as changing the permissions incase the server was having issues writing. Each time I run, I receive the same error. Even after I have deleted the folder so it is empty before the integration.
Does anyone have any ideas on how to solve this issue? I have built my iOS application in Swift (which I believe should still work with the CI server)
I am running OSX Server 4.0 and the latest version of XCode.
I followed Apple's documentation for creating bots
Thanks,
EDIT:
After some experimenting and trying different things to see what the issue is, I disabled 2-factor authentication on my GitHub hosting. This appeared to solve the issue, despite the fact that I was generating a specific application key to get around 2-factor. It solved the issue for a small amount of time, and I managed to successfully get the bot to integrate a few times. However it appears to have gone back to its old tricks.
If anyone has any other knowledge on this, or has managed to get it working on their own machines it will be good to know.
So I believe I have solved this issue, the GitHub 2-factor authentication issue looks to be a red herring.
When setting up the bot, there is a section that says "Checkout the repository", I did not do this step because I already had the repository on my local machine and presumed that it would simply create the repository in another location, and server no other purpose.
However, after some investigation this step is very necessary. From what I understand, checking out the repository does create it again in another location, however this is necessary as this new repository is where the Bot's will pull changes into and build in order to perform the tests. I was trying to use the same repo for development and for the Bots, which it did not like.
Creating a clean checkout of the project (on the server), and configuring the bots in that project then allowed me to progress and get everything setup correctly. It comes down to user error. In hindsight, it makes perfect sense to have a separate repo for the bots (this is my first CI server setup), however the error messages were not helpful and I can't remember seeing this emphasised in the setup guide.