before i have to say that i don't know very well machine learning.
I want to ask if with Machine Learning can help to fill a specified area with some irregular geometries to use more area that it can, it's call "nesting"
Machile learning works by comparing the current configuration to other ones previously shown for training, with solutions, and tries to "interpolate" between them.
In your case, it means that you should have sufficiently many solved cases so that you can reasonably cover the configuration space. This can be a serious obstacle, because it requires that you have a packing algorithm anyway.
Also, due to the discontinous nature of the solution function, I doubt that an ML approach be efficient and able to construct collision-free solutions in all cases.
I'm looking to analyze and compare the following `signals':
(Edit: better renderings here: oscillations good and here: oscillations bad)
What you see are plots of neuron activations from a type of artificial neural network plotted against time. Each line in the plot is a neuron's activation over time which can have a value between -1 and 1.
In the first plot, the activities are stable and consistent while the second exemplifies more chaotic activity (for want of a better term)-- some kind of destructive interference seems to occur ever so often..
Anyhow, I would like to do some kind of 'clever' analysis but since signal analysis is really not my strong point, thought I'd ask for some advice here...
EDIT: Let me clarify a bit. Ultimately, I would like to characterize the data. This could for example involve the pinpointing of correlations between the individual signals contained in each plot. I would like to measure 'regularity' or data invariance: in the above examples, the upper plot is more regular than the lower plot. I guess therefore I could compute the variance of each signal and take that as a measure; but I was wondering if some more comprehensive signal-processing technique could be better suited (I'm not sure). In fact I'm not even sure if signal-processing is what I really want now that I think about it. Perhaps some kind of wavelet or ft analysis...
For those interested, I am working on the computational modelling of worm locomotion.
You should consult some good books on nonlinear time series analysis. For instane, a measure for the regularity of your signal could be the Lyapunov spectrum. Another possibility would entropy. If you are interested in the correlation between signal, you could use transfer-entropy or granger causality, or for neurons it would be good to have a look at some measure for phase synchronization. The bayesian stuff could also be worth trying.
But – most important – firstly you need a proper question about what you really want to know. Once you've got that it is far more easy to pick the right tool.
And one final hint. Look for tools outside the engineering community. Their tools are mostly linear, but you are dealing with a highly nonlinear system. Wavelets, FFT and stuff are useful if you don't know anything about your signal and you want to have another perspective on it, but they are not suited for your kind of problem.
Consider an optimization problem of some dimension n, Given some linear set of equations(inequalities) or constraints on the inputs which form a convex region, finding the maximum\minimum value of some expression which is some linear combination of inputs(or dimensions).
For larger dimension, these optimization problems take much time to give the exact answer.
So, can we use machine learning techniques, to get some approximate solution in lesser time.
if we can use machine learning techniques in this context, How the Training set should be??
Do you mean "How big should the training set be?" If so, then that is very much a "how long is a piece of string" question. It needs to be large enough for the algorithm being used, and to represent the data that is being modeled.
This doesn't strike me as being especially focused on machine learning, as is typically meant by the term anyway. It's just a straightforward constrained optimization problem. You say that it takes too long to find solutions now, but you don't mention how you're trying to solve the problem.
The simplex algorithm is designed for this sort of problem, but it's exponential in the worst case. Is that what you're trying that's taking too long? If so, there are tons of metaheuristics that might perform well. Tabu search, simulated annealing, evolutionary algorithms, variable depth search, even simple multistart hill climbers. I would probably try something along those lines before I tried anything exotic.
A developer I am working with is developing a program that analyzes images of pavement to find cracks in the pavement. For every crack his program finds, it produces an entry in a file that tells me which pixels make up that particular crack. There are two problems with his software though:
1) It produces several false positives
2) If he finds a crack, he only finds small sections of it and denotes those sections as being separate cracks.
My job is to write software that will read this data, analyze it, and tell the difference between false-positives and actual cracks. I also need to determine how to group together all the small sections of a crack as one.
I have tried various ways of filtering the data to eliminate false-positives, and have been using neural networks to a limited degree of success to group cracks together. I understand there will be error, but as of now, there is just too much error. Does anyone have any insight for a non-AI expert as to the best way to accomplish my task or learn more about it? What kinds of books should I read, or what kind of classes should I take?
EDIT My question is more about how to notice patterns in my coworker's data and identify those patterns as actual cracks. It's the higher-level logic that I'm concerned with, not so much the low-level logic.
EDIT In all actuality, it would take AT LEAST 20 sample images to give an accurate representation of the data I'm working with. It varies a lot. But I do have a sample here, here, and here. These images have already been processed by my coworker's process. The red, blue, and green data is what I have to classify (red stands for dark crack, blue stands for light crack, and green stands for a wide/sealed crack).
In addition to the useful comments about image processing, it also sounds like you're dealing with a clustering problem.
Clustering algorithms come from the machine learning literature, specifically unsupervised learning. As the name implies, the basic idea is to try to identify natural clusters of data points within some large set of data.
For example, the picture below shows how a clustering algorithm might group a bunch of points into 7 clusters (indicated by circles and color):
(source: natekohl.net)
In your case, a clustering algorithm would attempt to repeatedly merge small cracks to form larger cracks, until some stopping criteria is met. The end result would be a smaller set of joined cracks. Of course, cracks are a little different than two-dimensional points -- part of the trick in getting a clustering algorithm to work here will be defining a useful distance metric between two cracks.
Popular clustering algorithms include k-means clustering (demo) and hierarchical clustering. That second link also has a nice step-by-step explanation of how k-means works.
EDIT: This paper by some engineers at Phillips looks relevant to what you're trying to do:
Chenn-Jung Huang, Chua-Chin Wang, Chi-Feng Wu, "Image Processing Techniques for Wafer Defect Cluster Identification," IEEE Design and Test of Computers, vol. 19, no. 2, pp. 44-48, March/April, 2002.
They're doing a visual inspection for defects on silicon wafers, and use a median filter to remove noise before using a nearest-neighbor clustering algorithm to detect the defects.
Here are some related papers/books that they cite that might be useful:
M. Taubenlatt and J. Batchelder, “Patterned Wafer Inspection Using Spatial Filtering for Cluster Environment,” Applied Optics, vol. 31, no. 17, June 1992, pp. 3354-3362.
F.-L. Chen and S.-F. Liu, “A Neural-Network Approach to Recognize Defect Spatial Pattern in Semiconductor Fabrication.” IEEE Trans. Semiconductor Manufacturing, vol. 13, no. 3, Aug. 2000, pp. 366-373.
G. Earl, R. Johnsonbaugh, and S. Jost, Pattern Recognition and Image Analysis, Prentice Hall, Upper Saddle River, N.J., 1996.
Your problem falls in the very broad field of image classification. These types of problems can be notoriously difficult, and at the end of the day, solving them is an art. You must exploit every piece of knowledge you have about the problem domain to make it tractable.
One fundamental issue is normalization. You want to have similarly classified objects to be as similar as possible in their data representation. For example, if you have an image of the cracks, do all images have the same orientation? If not, then rotating the image may help in your classification. Similarly, scaling and translation (refer to this)
You also want to remove as much irrelevant data as possible from your training sets. Rather than directly working on the image, perhaps you could use edge extraction (for example Canny edge detection). This will remove all the 'noise' from the image, leaving only the edges. The exercise is then reduced to identifying which edges are the cracks and which are the natural pavement.
If you want to fast track to a solution then I suggest you first try the your luck with a Convolutional Neural Net, which can perform pretty good image classification with a minimum of preprocessing and noramlization. Its pretty well known in handwriting recognition, and might be just right for what you're doing.
I'm a bit confused by the way you've chosen to break down the problem. If your coworker isn't identifying complete cracks, and that's the spec, then that makes it your problem. But if you manage to stitch all the cracks together, and avoid his false positives, then haven't you just done his job?
That aside, I think this is an edge detection problem rather than a classification problem. If the edge detector is good, then your issues go away.
If you are still set on classification, then you are going to need a training set with known answers, since you need a way to quantify what differentiates a false positive from a real crack. However I still think it is unlikely that your classifier will be able to connect the cracks, since these are specific to each individual paving slab.
I have to agree with ire_and_curses, once you dive into the realm of edge detection to patch your co-developers crack detection, and remove his false positives, it seems as if you would be doing his job. If you can patch what his software did not detect, and remove his false positives around what he has given you. It seems like you would be able to do this for the full image.
If the spec is for him to detect the cracks, and you classify them, then it's his job to do the edge detection and remove false positives. And your job to take what he has given you and classify what type of crack it is. If you have to do edge detection to do that, then it sounds like you are not far from putting your co-developer out of work.
There are some very good answers here. But if you are unable to solve the problem, you may consider Mechanical Turk. In some cases it can be very cost-effective for stubborn problems. I know people who use it for all kinds of things like this (verification that a human can do easily but proves hard to code).
https://www.mturk.com/mturk/welcome
I am no expert by any means, but try looking at Haar Cascades. You may also wish to experiment with the OpenCV toolkit. These two things together do face detection and other object-detection tasks.
You may have to do "training" to develop a Haar Cascade for cracks in pavement.
What’s the best approach to recognize patterns in data, and what’s the best way to learn more on the topic?
The best approach is to study pattern recognition and machine learning. I would start with Duda's Pattern Classification and use Bishop's Pattern Recognition and Machine Learning as reference. It would take a good while for the material to sink in, but getting basic sense of pattern recognition and major approaches of classification problem should give you the direction. I can sit here and make some assumptions about your data, but honestly you probably have the best idea about the data set since you've been dealing with it more than anyone. Some of the useful technique for instance could be support vector machine and boosting.
Edit: An interesting application of boosting is real-time face detection. See Viola/Jones's Rapid Object Detection using a Boosted Cascade of Simple
Features (pdf). Also, looking at the sample images, I'd say you should try improving the edge detection a bit. Maybe smoothing the image with Gaussian and running more aggressive edge detection can increase detection of smaller cracks.
I suggest you pick up any image processing textbook and read on the subject.
Particularly, you might be interested in Morphological Operations like Dilation and Erosion, which complements the job of an edge detector. Plenty of materials on the net...
This is an image processing problem. There are lots of books written on the subject, and much of the material in these books will go beyond a line-detection problem like this. Here is the outline of one technique that would work for the problem.
When you find a crack, you find some pixels that make up the crack. Edge detection filters or other edge detection methods can be used for this.
Start with one (any) pixel in a crack, then "follow" it to make a multipoint line out of the crack -- save the points that make up the line. You can remove some intermediate points if they lie close to a straight line. Do this with all the crack pixels. If you have a star-shaped crack, don't worry about it. Just follow the pixels in one (or two) directions to make up a line, then remove these pixels from the set of crack pixels. The other legs of the star will recognized as separate lines (for now).
You might perform some thinning on the crack pixels before step 1. In other words, check the neighbors of the pixels, and if there are too many then ignore that pixel. (This is a simplification -- you can find several algorithms for this.) Another preprocessing step might be to remove all the lines that are too thin or two faint. This might help with the false positives.
Now you have a lot of short, multipoint lines. For the endpoints of each line, find the nearest line. If the lines are within a tolerance, then "connect" the lines -- link them or add them to the same structure or array. This way, you can connect the close cracks, which would likely be the same crack in the concrete.
It seems like no matter the algorithm, some parameter adjustment will be necessary for good performance. Write it so it's easy to make minor changes in things like intensity thresholds, minimum and maximum thickness, etc.
Depending on the usage environment, you might want to allow user judgement do determine the questionable cases, and/or allow a user to review the all the cracks and click to combine, split or remove detected cracks.
You got some very good answer, esp. #Nate's, and all the links and books suggested are worthwhile. However, I'm surprised nobody suggested the one book that would have been my top pick -- O'Reilly's Programming Collective Intelligence. The title may not seem germane to your question, but, believe me, the contents are: one of the most practical, programmer-oriented coverage of data mining and "machine learning" I've ever seen. Give it a spin!-)
It sounds a little like a problem there is in Rock Mechanics, where there are joints in a rock mass and these joints have to be grouped into 'sets' by orientation, length and other properties. In this instance one method that works well is clustering, although classical K-means does seem to have a few problems which I have addressed in the past using a genetic algorithm to run the interative solution.
In this instance I suspect it might not work quite the same way. In this case I suspect that you need to create your groups to start with i.e. longitudinal, transverse etc. and define exactly what the behviour of each group is i.e. can a single longitudinal crack branch part way along it's length, and if it does what does that do to it's classification.
Once you have that then for each crack, I would generate a random crack or pattern of cracks based on the classification you have created. You can then use something like a least squares approach to see how closely the crack you are checking fits against the random crack / cracks you have generated. You can repeat this analysis many times in the manner of a Monte-Carlo analysis to identify which of the randomly generated crack / cracks best fits the one you are checking.
To then deal with the false positives you will need to create a pattern for each of the different types of false positives i.e. the edge of a kerb is a straight line. You will then be able to run the analysis picking out which is the most likely group for each crack you analyse.
Finally, you will need to 'tweak' the definition of different crack types to try and get a better result. I guess this could either use an automated approach or a manual approach depending on how you define your different crack types.
One other modification that sometimes helps when I'm doing problems like this is to have a random group. By tweaking the sensitivity of a random group i.e. how more or less likely a crack is to be included in the random group, you can sometimes adjust the sensitivty of the model to complex patterns that don't really fit anywhere.
Good luck, looks to me like you have a real challenge.
You should read about data mining, specially pattern mining.
Data mining is the process of extracting patterns from data. As more data are gathered, with the amount of data doubling every three years, data mining is becoming an increasingly important tool to transform these data into information. It is commonly used in a wide range of profiling practices, such as marketing, surveillance, fraud detection and scientific discovery.
A good book on the subject is Data Mining: Practical Machine Learning Tools and Techniques
(source: waikato.ac.nz) ](http://www.amazon.com/Data-Mining-Ian-H-Witten/dp/3446215336 "ISBN 0-12-088407-0")
Basically what you have to do is apply statistical tools and methodologies to your datasets. The most used comparison methodologies are Student's t-test and the Chi squared test, to see if two unrelated variables are related with some confidence.