The OpenVpn application needs an additional adapter to can work well. The Tap-Win32 virtual ethernet adapter will be installed during the application installation or can be added later.
Something went wrong, because I have tried everything, also running as administrator, troubleshooting, enable/disable, reinstall, but always will be going this to a failed status.
But without this adapter the connection will be failed too.
What can to do then?
It seems that the problem is solved by downloading the newest standalone Tap driver from OpenVpn repository.
Related
Yesterday was 13th, probably well known virus caused crash of internet connection and Windows 10 functions. I could not use keyboard and mouse either to restart or to repair Windows10 with advanced options. With installation USB program started but with bugs and no internet connections was available since no hardware devices found.
The freeware tool cFosICS manages Windows Internet Connection Sharing. It comes with additional commands to fix the Windows 10 bug which may stop Internet Connection Sharing from working after a reboot.
See details here: https://www.cfos.de/en/cfosspeed/cfosics.htm
Try Installation from a DVD .This is Most preferable.Or you can use latest version of RUFUS to boot your Flash Drive.Install the latest version of Windows 10 Pro.
Goto Here For Download
Make sure you have internet connectivity to Sign in to Windows Account.
Set the Update off if you have all problems are solved.
Hope it will help !!
I checked status on cmd with configip/all and got answer IP routing is disabled. So I went to device manager I looked in help how to connect to internet. In Microsoft Management Console/Contents/Get Connected/ there is Connecting to the Internet procedure.
I used Get-NetAdapter. t-NetAdapter: Cannot connect to CIM server error. The service can not be started, either because it is disabled or because another software installation is in progress. Same with Test-Configuration command. The error means: „Cannot connect the computer to the server because of restart pending.
The simple is to use Microsoft Virtual Agent which will with your problem question and it will guide it through steps needed to solve problem. It also recommednds cmd commands as referred above. In my case I had to update Windows10 with formed USB key.
Sometimes my ArangoDB is going down with next error:
Error message 'Could not connect to 'tcp://127.0.0.1:8529' 'connect() failed with #10061
I can't understand the reason. It's look like I am turning on my PC and nothing do not work.
Before I fixed this problem with reinstall, but is there any better solution?
OS Windows
ArangoDB 2.8.7
The V8 version used in the pre ArangoDB 3 had occasional troubles in the garbage collection which would make ArangoDB in term go down.
This is fixed with ArangoDB 3.
Please upgrade your installation, and report back whether the problem still persists.
You can use netstat to check whether ArangoDB is listening to its default port 8529:
netstat -a
Active Connections
Proto Lokale Adresse Remoteadresse Status
...
TCP 127.0.0.1:8529 meschenich:0 LISTEN
...
If thats not the case, your client has nothing to connect to.
This could be due to firewall of an antivirus.
In my case it was Avast antivirus that was blocking connecting to that port.
I disabled all the antivirus shields and checked loading arangodb web server
http://127.0.0.1:8529
It connects after few minutes.
Reference : No connection could be made because the target machine actively refused it
I fixed the problem by restarting Windows.
I am running the following:
Ubuntu 15.05 ("Wily")
Virtual Box 5.0.8
Vagrant 1.7.4
Otto 0.1.2
All seems to have installed fine after I followed How to install Hashicorp's Otto tutorial.
However, each time I run otto dev my internet connection seems to go down (meaning I get a little notify box in my right top corner that tells me that a connection has been established and I'm connected to vboxnet0 and then it tells me my ethernet connection is disconnected) and I get the following error:
pc#pc:~/development/my-rails-app$ otto dev
==> Creating local development environment with Vagrant if it doesn't exist...
Raw Vagrant output will begin streaming in below. Otto does
not create this output. It is mirrored directly from Vagrant
while the development environment is being created.
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'hashicorp/precise64' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 22 => 2222 (adapter 1)
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.
If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run vagrant up while the
VirtualBox GUI is open.
The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.
Error building dev environment: Error executing Vagrant: exit status 1
The error messages from Vagrant are usually very informative.
Please read it carefully and fix any issues it mentions. If
the message isn't clear, please report this to the Otto project.
pc#pc:~/development/my-rails-app$
Any ideas? Is this a problem with using otto on a virtual machine?
I am new to Otto, but I had a similar error. The cause of this error in my case: I first attempted to set up in Vagrant, i.e. created a vagrantfile, than attempted to run Otto.
My Vagrantfile was using an ubuntu image, but it was different from the image Otto was trying to use when guessing at my app structure. Since Otto is supposed to be the tool to abstract Vagrant (and others), I figured I would let it do the work. So deleting my Vagrantfile solved the issue for me - basically, the two vagrantfiles were conflicting.
You can go in and customize your vagrantfile and otto appfile etc., but this got me up and running.
there was a change in wily64 to rename the ethernet devices from eth0 to a more standardized one, which could lead to disconnecting on bootup.
Eventually this can help you:
https://gist.github.com/brbsix/b70413dec907906ef659
This is probably not a networking issue but VMware misconfiguration.
Vagrant (VirtualBox) will complain if the vmx flag is not visible to the guest OS. You need to make sure cat /proc/cpuinfo |grep vmx is not be empty.
If you are using VMware Player then turn the vm off, go to Virtual Machine Settings, Processors and enable Virtualize Intel VT-x/EPT or AMD-V/RVI.
I'm new to Wildfly and I hope you guys can help me with this problem:
I'm following this tutorial on how to Install Wildfly 8 and when I'm trying to execute step 4 I get the following errors:
I've been googling for a while now and I can't find an answer. I've tryed with JDK 7 and 8, no changes, I'm using admin permissions, I've even tried to download Wildfly again and still no changes.
More experienced co-workers have seen this and don't have a clue about what's going on.
Can you help me? Thanks
The tutorial you linked to, has Wildfly configured to use the default port 8080. Most likely, you have another process or service running which is already using port 8080. Try to find out what process it is and stop it, or try configuring Wildfly to use a different port.
try restart the machine or enable IPV6 in the machine, this error will be resolved
Those having the same problem should check who else uses the port 9990 in your Windows system. TCPView is a good tool to find out the guilty of charge. One of possible common causes in this case is NVIDIA Network Service (NvNetworkService.exe).
If that's the case just find it in your Windows services list and stop/disable it. The service itself is responsible for checking for Nvidia drivers updates, so any time you want it back just turn it on manually.
In my case, I inadvertedly added an AJP socket binding while using standalone jboss_cli utility:
[standalone#localhost:9990 /] /subsystem=undertow/server=default-server/ajp-listener=ajp:add(socket-binding=ajp)
This led to an 'already in use' error that doesn't let any app to start and signaled 503 error through an Apache web server.
I deleted the binding:
/subsystem=undertow/server=default-server/ajp-listener=ajp:remove
And then everything worked normally.
I too had the same issue.After analysis it was found that the SSL port(443 in my case) was creating this issue. I just terminated the processes that were running on 443 and restarted the wildfly and everything worked fine after that.
I had faced same issue with wildfly_8.2.1
Port 8080 was also free, so that solution doesn't worked for me.
Try below procedure as it helped to resolve my issue.
add below lines to your server's /etc/sysctl.conf file
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
No restart is required for this solution.
My setup:
Opertaing System: Windows 8.1
Memory: 16GB
HD: 500GB
etc. non relevant.
Issue:
I noticed the issue when my printer stopped working after a normal restart. At that point I tried to uninstall and reinstall the printer driver. The install failed.
At that point I also realized all my remote desktop connections were also failing, with not being able to find the remote host.
Here is the error I was seeing when install for the printer was failing:
can't start printer spooler service not enough resources are available to start the service
Manually trying to start the spooler service and checking in the event Viewer of windows showed that it was failing on:
Failed to schedule Software Protection service for re-start at 2014-09-13T08:09:30Z. Error Code: 0x80040154.
Further trying to restart the protection service revealed that it was failing on:
Task Scheduler service has encountered RPC initialization error in "RpcServerUseProtseq:ncacn_ip_tcp". Additional Data: Error Value: 1721.
In either case my computer had become somewhat useless as I couldn't install anything and my printer and remote desktop was broken too.
Reporting the problem just in case if someone has a similar issues.
The resolution for my problem is actually posted here, but way back so bringing it to more light:
http://social.technet.microsoft.com/Forums/windows/en-US/0c438376-1486-4ae4-9847-2de7a8767f27/task-scheduler-service-has-encountered-rpc-initialization-error-in?forum=itprovistasp
For me what worked was just to starting the prompt in adminstrator mode, running:
netsh winsock reset
and restarting my machine.
Not exactly certain of what actually fixed the issue.