I'm working with a poor internet connection and trying to pull and run a image.
I wanted to download one layer at a time and per documentation tried adding a flat --max-concurrent-downloads like so:
docker run --rm -p 8787:8787 -e PASSWORD=blah --max-concurrent-downloads=1 rocker/verse
But this gives an error:
unknown flag: --max-concurrent-downloads See 'docker run --help'.
I tried typing docker run --help and interestingly did not see the option --max-concurrent-downloads.
I'm using Docker Toolbox since I'm on a old Mac.
Over here under l there's an option for --max-concurrent-downloads however this doesn't appear on my terminal when typing docker run --help
How can I change the default of downloading 3 layers at a time to just one?
From the official documentation: (https://docs.docker.com/engine/reference/commandline/pull/#concurrent-downloads)
You can pass --max-concurrent-downloads during a pull operation.
You can set --max-concurrent-downloads with the dockerd command.
If you're using the docker Desktop GUI for Mac or Windows:
You can edit the .json file directly in docker engine settings:
This setting needs to be passed to dockerd when starting the daemon, not to the docker client CLI. The dockerd process is running inside of a VM with docker-machine (and other docker desktop environments).
With docker-machine that is used in toolbox, you typically pass the engine flags on the docker-machine create command line, e.g.
docker-machine create --engine-opt max-concurrent-downloads=1
Once you have a created machine, you can follow the steps from these answers to modify the config of an already running machine, mainly:
SSH into your local docker VM.
note: if 'default' is not the name of your docker machine then substitute 'default' with your docker machine name $
docker-machine ssh default
Open Docker profile $ sudo vi /var/lib/boot2docker/profile
Then in that profile, you would add your --engine-opt max-concurrent-downloads=1.
Newer versions of docker desktop (along with any Linux install) make this much easier with a configuration menu daemon -> advanced where you can specify your daemon.json entries like:
{
"max-concurrent-downloads": 1
}
Related
I'm working with a poor internet connection and trying to pull and run a image.
I wanted to download one layer at a time and per documentation tried adding a flat --max-concurrent-downloads like so:
docker run --rm -p 8787:8787 -e PASSWORD=blah --max-concurrent-downloads=1 rocker/verse
But this gives an error:
unknown flag: --max-concurrent-downloads See 'docker run --help'.
I tried typing docker run --help and interestingly did not see the option --max-concurrent-downloads.
I'm using Docker Toolbox since I'm on a old Mac.
Over here under l there's an option for --max-concurrent-downloads however this doesn't appear on my terminal when typing docker run --help
How can I change the default of downloading 3 layers at a time to just one?
From the official documentation: (https://docs.docker.com/engine/reference/commandline/pull/#concurrent-downloads)
You can pass --max-concurrent-downloads during a pull operation.
You can set --max-concurrent-downloads with the dockerd command.
If you're using the docker Desktop GUI for Mac or Windows:
You can edit the .json file directly in docker engine settings:
This setting needs to be passed to dockerd when starting the daemon, not to the docker client CLI. The dockerd process is running inside of a VM with docker-machine (and other docker desktop environments).
With docker-machine that is used in toolbox, you typically pass the engine flags on the docker-machine create command line, e.g.
docker-machine create --engine-opt max-concurrent-downloads=1
Once you have a created machine, you can follow the steps from these answers to modify the config of an already running machine, mainly:
SSH into your local docker VM.
note: if 'default' is not the name of your docker machine then substitute 'default' with your docker machine name $
docker-machine ssh default
Open Docker profile $ sudo vi /var/lib/boot2docker/profile
Then in that profile, you would add your --engine-opt max-concurrent-downloads=1.
Newer versions of docker desktop (along with any Linux install) make this much easier with a configuration menu daemon -> advanced where you can specify your daemon.json entries like:
{
"max-concurrent-downloads": 1
}
I created a sample microservice application with war file. After that I installed Docker tool box. Then I created sample Dockerfile and trying to build image using Docker toolbox quick start terminal.
I changed directory to project root directory, and ran the following command:
docker build -t "dockerDemo" .
And getting error like Docker daemon is not running.
And also I run the following commands:
docker run hello-world
docker-machine ls
I am getting following results screens.
I am now just started with containers and Docker concept. How can I solve this?
According to your screenshots, it's a pretty common issue. Unfortunately the only solution is to remove the vm and recreate it. You can find more details in this issue.
$ docker-machine rm default
$ docker-machine create --driver virtualbox default
Delete de Docker toolbox virtualbox vm. It is usually named "default". Close and open again the docker console, it will create again the vm automatically. Then try again.
I just installed docker on a Mac (docker toolbox from here; at least I hope to have it installed correctly), but when following the tutorial and type the following command
docker run hello-world
I get the following error:
docker: Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?.
Did I do something wrong? Do I miss some installation steps? Do I miss something that is 'obvious' to the experts, but not to docker beginners like me?
I don't see anything in the instructions that says anything about a 'docker daemon'...
On the shell it says:
docker is configured to use the default machine with IP aa.bb.cc.d
The version command seems to work:
Docker version 17.07.0-ce, build 8784753
Update:
I tried to start the daemon by using the command
sudo dockerd
but all I got was
sudo: dockerd: command not found
Correction: The command works, but only in the sell that opened magically during the installation. The command does not work in any other shell. But when I have to close the shell/restart the computer - what to do then? How to 'start docker???
Maybe there is a tutorial that is complete and working and explains why I need a docker-deacon, how to start it, how to start a docker image or whatever, including the complete terminology for beginners?
Docker Toolbox runs a virtual linux machine on which the docker-daemon runs. To control the virtual machine, you use the docker-machine command. For example docker-machine start to start the machine after you reboot your computer, or docker-machine stop to shut it down.
There is also the docker-machine env command which will set the environment variables needed for docker to work. Check the bottom line of it's output, it shows you how to run the command correctly to set the environment variables. Should be exec $(docker-machine env) on Mac if I'm correct. You need to set the environment variables in each shell in which you want to use docker commands.
Docker for mac starts a linux virtual machine in the background which contains the actual docker stuff. When you start a normal terminal, the terminal is not connected to the vm to execute the docker commands.
The docker quick start terminal is the one that you need to use. This terminal will execute the commands on the VM that is running in the background.
With docker toolbox, if you don't launch your terminal from the docker menu, you'll need to configure your environment separately:
eval "$(docker-machine env default)"
After (successfully, I believe) installing the Docker Toolbox, I get the following error:
$ docker ps
error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.26/containers/json: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
Also, when I try to run the docker quickstart terminal, it just prints the following error:
Docker Machine is not installed. Please re-run the Toolbox Installer and try aga
in.
Looks like something went wrong in step 'Looking for vboxmanage.exe'... Press an
y key to continue...
I searched through the docker troubleshooting but didn't find any hint.
I tried installing the toolbox both with and without checking the "Install VirtualBox with NDIS5 driver [default NDIS6]" checkbox.
Try this,
Check if the docker machine exists. Command to check this below.
docker-machine ls
If you still get error then execute step 2 below. If you see any machine listed and it has STATE stopped then execute docker-machine start machine_name eg. docker-machine start default
This step helps you to create a docker-machine.
docker-machine create --driver virtualbox default
I also face some problems like you and I troubleshoot the problem with the following steps in window 8.1.
Install Docker Toolbox
REGENERATE CERTIFICATES
$ docker-machine regenerate-certs default
Regenerate TLS machine certs? Warning: this is irreversible. (y/n): y
Regenerating TLS certificates
Create new machine default
$ docker-machine create default
Note: It may take a few minutes for downloading boot2docker.iso file.
UPGRADE docker-machine (Optional)
$ docker-machine upgrade
START Docker Quickstart Terminal (or) Run start.sh file under the location => C:\Program Files\Docker Toolbox
RUN HELLOWORLD
$ docker run hello-world
I hope it will help you :-)
How can I share a folder between my Windows files and a docker container, by mounting a volume with simple --volume command using Docker Toolbox on?
I'm using "Docker Quickstart Terminal" and when I try this:
winpty docker run -it --rm --volume /C/Users/myuser:/myuser ubuntu
I have this error:
Invalid value "C:\\Users\\myuser\\:\\myuser" for flag --volume: bad mount mode specified : \myuser
See 'docker run --help'.
Following this, I also tried
winpty docker run -it --rm --volume "//C/Users/myuser:/myuser" ubuntu
and got
Invalid value "\\\\C:\\Users\\myuser\\:\\myuser" for flag --volume: \myuser is not an absolute path
See 'docker run --help'.
This is an improvement of the selected answer because that answer is limited to c:\Users folder. If you want to create a volume using a directory outside of c:\Users this is an extension.
In windows 7, I used docker toolbox. It used Virtual Box.
Open virtual box
Select the machine (in my case default).
Right clicked and select settings option
Go to Shared Folders
Include a new machine folder.
For example, in my case I have included:
**Name**: c:\dev
**Path**: c/dev
Click and close
Open "Docker Quickstart Terminal" and restart the docker machine.
Use this command:
$ docker-machine restart
To verify that it worked, following these steps:
SSH to the docker machine.
Using this command:
$ docker-machine ssh
Go to the folder that you have shared/mounted.
In my case, I use this command
$ cd /c/dev
Check the user owner of the folder. You could use "ls -all" and verify that the owner will be "docker"
You will see something like this:
docker#default:/c/dev$ ls -all
total 92
drwxrwxrwx 1 docker staff 4096 Feb 23 14:16 ./
drwxr-xr-x 4 root root 80 Feb 24 09:01 ../
drwxrwxrwx 1 docker staff 4096 Jan 16 09:28 my_folder/
In that case, you will be able to create a volume for that folder.
You can use these commands:
docker create -v /c/dev/:/app/dev --name dev image
docker run -d -it --volumes-from dev image
or
docker run -d -it -v /c/dev/:/app/dev image
Both commands work for me. I hope this will be useful.
This is actually an issue of the project and there are 2 working workarounds:
Creating a data volume:
docker create -v //c/Users/myuser:/myuser --name data hello-world
winpty docker run -it --rm --volumes-from data ubuntu
SSHing directly in the docker host:
docker-machine ssh default
And from there doing a classic:
docker run -it --rm --volume /c/Users/myuser:/myuser ubuntu
If you are looking for the solution that will resolve all the Windows issues and make it work on the Windows OS in the same way as on Linux, then see below. I tested this and it works in all cases. I’m showing also how I get it (the steps and thinking process). I've also wrote an article about using Docker and dealing with with docker issues here.
Solution 1: Use VirtualBox (if you think it's not good idea see Solution 2 below)
Open VirtualBox (you have it already installed along with the docker tools)
Create virtual machine
(This is optional, you can skip it and forward ports from the VM) Create second ethernet card - bridged, this way it will receive IP address from your network (it will have IP like docker machine)
Install Ubuntu LTS which is older than 1 year
Install docker
Add shared directories to the virtual machine and automount your project directories (this way you have access to the project directory from Ubuntu) but still can work in Windows
Done
Bonus:
Everything is working the same way as on Linux
Pause/Unpause the dockerized environment whenever you want
Solution 2: Use VirtualBox (this is very similar to the solution 1 but it shows also the thinking process, which might be usefull when solving similar issues)
Read that somebody move the folders to /C/Users/Public and that works https://forums.docker.com/t/sharing-a-volume-on-windows-with-docker-toolbox/4953/2
Try it, realize that it doesn’t have much sense in your case.
Read entire page here https://github.com/docker/toolbox/issues/607 and try all solutions listed on page
Find this page (the one you are reading now) and try all the solutions from other comments
Find somewhere information that setting COMPOSE_CONVERT_WINDOWS_PATHS=1 environment variable might solve the issue.
Stop looking for the solution for few months
Go back and check the same links again
Cry deeply
Feel the enlightenment moment
Open VirtualBox (you have it already installed along with the docker tools)
Create virtual machine with second ethernet card - bridged, this way it will receive IP address from your network (it will have IP like docker machine)
Install Ubuntu LTS which is very recent (not older than few months)
Notice that the automounting is not really working and the integration is broken (like clipboard sharing etc.)
Delete virtual machine
Go out and have a drink
Rent expensive car and go with high speed on highway
Destroy the car and die
Respawn in front of your PC
Install Ubuntu LTS which is older than 1 year
Try to run docker
Notice it’s not installed
Install docker by apt-get install docker
Install suggested docker.io
Try to run docker-compose
Notice it’s not installed
apt get install docker-compose
Try to run your project with docker-compose
Notice that it’s old version
Check your power level (it should be over 9000)
Search how to install latest version of docker and find the official guide https://docs.docker.com/install/linux/docker-ce/ubuntu/
Uninstall the current docker-compose and docker.io
Install docker using the official guide https://docs.docker.com/install/linux/docker-ce/ubuntu/
Add shared directories to the virtual machine and automount your project directories (this way you have access to the project directory from Ubuntu, so you can run any docker command)
Done
As of August 2016 Docker for windows now uses hyper-v directly instead of virtualbox, so I think it is a little different. First share the drive in settings then use the C: drive letter format, but use forward slashes. For instance I created an H:\t\REDIS directory and was able to see it mounted on /data in the container with this command:
docker run -it --rm -v h:/t/REDIS:/data redis sh
The same format, using drive letter and a colon then forward slashes for the path separator worked both from windows command prompt and from git bash.
I found this question googling to find an answer, but I couldn't find anything that worked. Things would seem to work with no errors being thrown, but I just couldn't see the data on the host (or vice-versa). Finally I checked out the settings closely and tried the format they show:
So first, you have to share the whole drive to the docker vm in settings here, I think that gives the 'docker-machine' vm running in hyper-v access to that drive. Then you have to use the format shown there, which seems to only exist in this one image and in no documentation or questions I could find on the web:
docker run --rm -v c:/Users:/data alpine ls /data
Simply using double leading slashes worked for me on Windows 7:
docker run --rm -v //c/Users:/data alpine ls /data/
Taken from here: https://github.com/moby/moby/issues/12590
Try this:
Open Docker Quickstart Terminal. If it is already open, run $ cd ~ to make sure you are in Windows user directory.
$ docker run -it -v /$(pwd)/ubuntu:/windows ubuntu
It will work if the error is due to typo. You will get an empty folder named ubuntu in your user directory. You will see this folder with the name windows in your ubuntu container.
For those using Virtual Box who prefer command-line approach
1) Make sure the docker-machine is not running
Docker Quickstart Terminal:
docker-machine stop
2) Create the sharing Windows <-> docker-machine
Windows command prompt:
(Modify following to fit your scenario. I feed my Apache httpd container from directory synced via Dropbox.)
set VBOX=D:\Program Files\Oracle\VirtualBox\VBoxManage.exe
set VM_NAME=default
set NAME=c/htdocs
set HOSTPATH=%DROPBOX%\htdocs
"%VBOX%" sharedfolder add "%VM_NAME%" --name "%NAME%" --hostpath "%HOSTPATH%" --automount
3) Start the docker-machine and mount the volume in a new container
Docker Quickstart Terminal:
(Again, I am starting an Apache httpd container, hence that port exposing.)
docker-machine start
docker run -d --name my-apache-container-0 -p 80:80 -v /c/htdocs:/usr/local/apache2/htdocs my-apache-image:1.0
share folders virtualBox toolbox and windows 7 and nodejs image container
using...
Docker Quickstart Terminal [QST]
Windows Explorer [WE]
lets start...
[QST] open Docker Quickstart Terminal
[QST] stop virtual-machine
$ docker-machine stop
[WE] open a windows explorer
[WE] go to the virtualBox installation dir
[WE] open a cmd and execute...
C:\Program Files\Oracle\VirtualBox>VBoxManage sharedfolder add "default" --name
"/d/SVN_FOLDERS/X2R2_WP6/nodejs" --hostpath "\?\d:\SVN_FOLDERS\X2R2_WP6\nodejs" --automount
check in the oracle virtual machine, that the new shared folder has appeared
[QST] start virtual-machine
$ docker-machine start
[QST] run container nodejs
docker stop nodejs
docker rm nodejs
docker run -d -it --rm --name nodejs -v /d/SVN_FOLDERS/X2R2_WP6/nodejs:/usr/src/app -w /usr/src/app node2
[QST] open bash to the container
docker exec -i -t nodejs /bin/bash
[QST] execute dir and you will see the shared files
I solved it!
Add a volume:
docker run -d -v my-named-volume:C:\MyNamedVolume testimage:latest
Mount a host directory:
docker run -d -v C:\Temp\123:C:\My\Shared\Dir testimage:latest