I want to do this in Latex
http://prntscr.com/nejl0x
But I cant make it work.
My code is the following
\documentclass{report}
\usepackage{graphicx}
\usepackage{ragged2e}
\usepackage{sectsty}
\usepackage{minitoc} % for contents
\chapterfont{\raggedleft}
\begin{document}
\dominitoc[n]
\chapter{Introduction}
\minitoc
\section{About}
\label{sec:About}
\section{Motivation}
\label{sec:Motivation}
\end{document}
But It doesn't work.
Also I cannot understand how to use the \undotted and \nomtcpagenumbers for minitoc.
The fasted way to remove the dotted lines is the undotted package option. To remove the page numbers, you can use \mtcsetpagenumbers{minitoc}{off}
\documentclass{report}
\usepackage{graphicx}
\usepackage{ragged2e}
\usepackage{sectsty}
\usepackage[undotted]{minitoc}
\mtcsetpagenumbers{minitoc}{off}
\mtcsetoffset{minitoc}{-4em}
\chapterfont{\raggedleft}
\begin{document}
\dominitoc
\tableofcontents
\chapter{Introduction}
\minitoc
\section{About}
\label{sec:About}
\section{Motivation}
\label{sec:Motivation}
\end{document}
Related
I'm trying to remove the space in LoF between different chapters. i have tried different solutions(patching it as well) but it is not working. I have attached the codes below for your reference. Any help or pointers to resolve it would be highly appreciated.
Edit: Link to a minimal working project file depicting the error.
Working Example
\documentclass[twoside, 12pt]{report}
\usepackage[utf8]{inputenc}
\usepackage{pdfpages}
%package for higlighting text
\usepackage{color,soul}
%packages for multicol glossary, bibliography and list
\usepackage[section,numberedsection=autolabel, acronym]{glossaries}
\usepackage{setspace}
\usepackage{enumitem}
\usepackage[style=ieee]{biblatex}
\usepackage{glossary-mcols}
\usepackage{multicol}
%package for comments
\usepackage{verbatim}
%%Random text
\usepackage{lipsum}
%packages for fancy headers
\usepackage{blindtext}
\usepackage{fancyhdr}
\usepackage{tikz}
%package for subfigures
\usepackage{subfigure}
\makeglossaries
% Use package below to change margins and graphics
\usepackage{graphicx}
\usepackage[a4paper,top=25mm,bottom=25mm,left=25mm,right=25mm]{geometry}
% text color package
\usepackage{xcolor}
% use to customize chapter headings of toc lof lot
\usepackage{tocloft}
\renewcommand{\cfttoctitlefont}{\hspace*{\fill}\Large\bfseries}
\renewcommand{\cftaftertoctitle}{\hspace*{\fill}}
\renewcommand{\cftlottitlefont}{\hspace*{\fill}\Large\bfseries}
\renewcommand{\cftafterlottitle}{\hspace*{\fill}}
\renewcommand{\cftloftitlefont}{\hspace*{\fill}\Large\bfseries}
\renewcommand{\cftafterloftitle}{\hspace*{\fill}}
\usepackage{sectsty}
\chapternumberfont{\Large}
\chaptertitlefont{\Large}
\usepackage{hyperref}
%for table
\usepackage{booktabs}
%maths Package
\usepackage{amsmath}
%minted package
\usepackage[]{minted}
\usepackage{fancyvrb}
%for greek words
\usepackage[utf8]{inputenc}
\usepackage[greek,english]{babel}
\usepackage{lmodern}
\usemintedstyle{vs}
\setminted{bgcolor=myGray,
breaklines,
mathescape,
linenos,
numbersep=5pt,
frame=single,
numbersep=5pt,
xleftmargin=0pt,
breaksymbolleft=\raisebox{0.8ex}{
\small\reflectbox{\carriagereturn}},
breaksymbolindentleft=0pt,
breaksymbolsepleft=0pt,
breaksymbolindentright=0pt,
breaksymbolsepright=0pt
}
%for code listing
\usepackage{xcolor}
\usepackage{listings}
\definecolor{myGray}{RGB}{245, 239, 239}
\definecolor{maroon}{RGB}{128,0,0}
\definecolor{forestGreen}{RGB}{1,68,33}
\lstdefinestyle{mystyle}{
backgroundcolor=\color{myGray},
commentstyle=\color{forestGreen},
keywordstyle=\color{blue},
numberstyle=\tiny\color{gray},
stringstyle=\color{maroon},
basicstyle=\ttfamily\small,
breakatwhitespace=false,
breaklines=true,
captionpos=b,
keepspaces=true,
numbers=left,
numbersep=5pt,
showspaces=false,
showstringspaces=false,
showtabs=false,
tabsize=2,
frame=single
}
\lstset{style=mystyle}
%Patch to remove the space in LoF, LoT, LoC per chapter basis
\usepackage{etoolbox}% http://ctan.org/pkg/etoolbox
\makeatletter
\patchcmd{\#chapter}{\addtocontents{lof}{\protect\addvspace{10\p#}}}{}{}{}% LoF
\patchcmd{\#chapter}{\addtocontents{lot}{\protect\addvspace{10\p#}}}{}{}{}% LoT
\makeatother
%for custom caption
\usepackage{caption}
% document begins here
\begin{document}
%Footer and header fancy - chapter x. ChapterName format
\fancyhead{}
\fancyhead[RO,LE]{\leftmark}
\fancyfoot{}
\fancyfoot[CE,CO]{\thepage}
\newpage
\phantomsection
\tableofcontents
\addcontentsline{toc}{chapter}{Table of Contents}
\newpage
\listoftables
\phantomsection
\addcontentsline{toc}{chapter}{\listtablename}
\newpage
\listoffigures
\phantomsection
\addcontentsline{toc}{chapter}{\listfigurename}
\newpage
\renewcommand{\lstlistingname}{Code}
\renewcommand{\lstlistlistingname}{List of \lstlistingname s}
\lstlistoflistings
\phantomsection
\addcontentsline{toc}{chapter}{\lstlistlistingname}
%CHAPTERS BEGIN
\pagenumbering{arabic}
\newpage
\input{Chapters/Intro}
\input{Chapters/Results}
\newpage
%%APPENDIX BEGINS
\fancyhead{}
\fancyfoot{}
\end{document}
Please find below the code for respective
The below figures are part of sample Intro file.
\begin{figure}[h]
\centering
\includegraphics[scale=0.5]{<someImage>}
\caption{Software Development Lifecycle}
\label{fig:swCycle}
\end{figure}
\begin{figure}[h]
\centering
\includegraphics[scale=0.5]{<someImage>}
\caption{Software Development Lifecycle2}
\label{fig:swCycle2}
\end{figure}
Results File
\begin{figure}[h]
\centering
\includegraphics[scale=0.5]{<someImage>}
\caption{Software Development Lifecycle3}
\label{fig:swCycle3}
\end{figure}
You could remove the spaces between the list entries of different chapters if you make the patches before you load hyperref:
\documentclass[twoside, 12pt]{report}
% use to customize chapter headings of toc lof lot
\usepackage{tocloft}
\renewcommand{\cfttoctitlefont}{\hspace*{\fill}\Large\bfseries}
\renewcommand{\cftaftertoctitle}{\hspace*{\fill}}
\renewcommand{\cftlottitlefont}{\hspace*{\fill}\Large\bfseries}
\renewcommand{\cftafterlottitle}{\hspace*{\fill}}
\renewcommand{\cftloftitlefont}{\hspace*{\fill}\Large\bfseries}
\renewcommand{\cftafterloftitle}{\hspace*{\fill}}
\usepackage{etoolbox}
\makeatletter
\patchcmd{\#chapter}{\addtocontents{lof}{\protect\addvspace{10\p#}}}{}{}{}
\patchcmd{\#chapter}{\addtocontents{lot}{\protect\addvspace{10\p#}}}{}{}{}
\makeatother
% load hyperref after these patches
\usepackage{hyperref}
\begin{document}
\listoffigures
\chapter{test}
\begin{figure}[htbp]
\caption{heading}
\end{figure}
\chapter{test}
\begin{figure}[htbp]
\caption{heading}
\end{figure}
\end{document}
Although i have tried many code of a footnote in a caption of a figure , it doesn't work , really , where is the problem here
\documentclass[a4paper,12pt]{report}
\usepackage[utf8]{inputenc}
\usepackage{graphicx}
\usepackage{fancyhdr}
\makenomenclature
\usepackage[nottoc]{tocbibind}
\pagenumbering{Roman}
\usepackage{lipsum}
\setcounter{tocdepth}{5}
\setcounter{secnumdepth}{4}
\begin{document}
\begin{figure}
\centering
\includegraphics[width=0.8\textwidth{images/frog.jpg}
\caption[frog]{frog \footnotemark }
\label{fig:pic1}
\end{figure}
\footnotetext{frog}
\end{document}
Two problems:
you can't have the \makenomenclature macro in your code with a package which defines it, e.g. nomencl
the ] after the optional argument of your graphic is missing
With the split between \footnotetext and \footnotemark there is always the risk that the floating figure and the footnote will end up on different pages. You can lessen the risk by using [htbp] as floating specifier for your figure, this way you at least allowed the figure to be placed where the footnote is.
\documentclass[a4paper,12pt]{report}
\usepackage[utf8]{inputenc}
\usepackage{graphicx}
\usepackage{fancyhdr}
%\makenomenclature
\usepackage[nottoc]{tocbibind}
\pagenumbering{Roman}
\usepackage{lipsum}
\setcounter{tocdepth}{5}
\setcounter{secnumdepth}{4}
\begin{document}
\begin{figure}[htpb]
\centering
\includegraphics[width=0.8\textwidth]{example-image-duck}
\caption[frog]{frog \footnotemark }
\label{fig:pic1}
\end{figure}
\footnotetext{frog}
\end{document}
I am very new to LaTex and am trying to center a figure.
I have tried to use the package float using both [h] and [H], I have tried to add \centering and I have tried to wrap the image in \begin{center} \end{centering} but nothing seems to work.
My full code is as such
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage{graphicx}
\usepackage{float}
\graphicspath{ {images/} }
\title{Dissertation}
\author{GC}
\date{\today}
\begin{document}
\maketitle
\section{Introduction}
\begin{figure}[H]
\centering
\includegraphics{my_grades}
\caption{grades plot}
\label{fig:grade}
\end{figure}
This figure does not seem to want to centre
\end{document}
This figure on the compiled document looks as such. If someone could help me understand why this doesn't want to move that would be great:
Your code seems fine, I just added a [width=50mm] in your include graphics and it centered the Figure.
I would check two issues:
Is your figure to larger than the textwidth?
Does your Figure has a white part on its lefthand side?
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage{graphicx}
\usepackage{float}
\graphicspath{ {images/} }
\title{Dissertation}
\author{GC}
\date{\today}
\begin{document}
\maketitle
\section{Introduction}
\begin{figure}[H]
\centering
\includegraphics[width=50mm]{darth-vader_5yvm.jpeg}
\caption{grades plot}
\label{fig:grade}
\end{figure}
This figure does not seem to want to centre
\end{document}
I would like to have a table of content with numbering identical to the ones in text. So, in text each section/subsection/subsubsection is numerated as '1.' or '1.1.' or '1.1.1.'. However my table of content is not updating it, so it shows '1' or '1.1'.
I was following answer to this topic: https://superuser.com/questions/811779/how-to-add-a-dot-for-section-subsection-numbering-in-tex
So I am using 'secdot' package. I have tried using
\renewcommand{\thechapter}{\arabic{chapter}.}
\renewcommand{\thesection}{\thechapter\arabic{section}.}
but I keep getting '\the chapter undefined', 'No counter chapter defined' or 'Missing number, treated as zero' errors.
I would appreciate any tips on what's wrong.
EDIT:
\documentclass[11pt, a4paper, twoside]{article}
\usepackage{listings, lstautogobble}
\usepackage{ragged2e}
\usepackage{times}
\usepackage{secdot}
\sectiondot{subsection}
\usepackage{listings}
\usepackage[toc,page]{appendix}
\usepackage[utf8]{inputenc}
\usepackage[english]{babel}
\geometry{a4paper,
left=30mm,
top=25mm,
bottom=25mm,
right=20mm
}
\sectiondot{subsection}
\makenomenclature
\setlength{\parindent}{0.5 cm}
\renewcommand{\baselinestretch}{1.15}
\pagenumbering{roman}
\begin{document}
\setboolean{#twoside}{false}
\begin{figure}[H]
\begin{center}
\includegraphics[width=14cm,height=15cm,keepaspectratio]{./thesis- frontpagedesign}
\end{center}
\end{figure}
\begin{center}
\tableofcontents
\end{center}
\begin{center}
\listoffigures
\end{center}
\section{Introduction}
%sometext
\makeatletter
\def\#seccntformat#1{%
\expandafter\ifx\csname c##1\endcsname\c#section\else
\csname the#1\endcsname\quad
\fi}
\makeatother
\end{document}
Your current setup is confusing. For example,
\makeatletter
\def\#seccntformat#1{%
\expandafter\ifx\csname c##1\endcsname\c#section\else
\csname the#1\endcsname\quad
\fi}
\makeatother
removes the setting of any \section number. And mixing this with the use of secdot seems problematic.
The easiest way to achieve dots after sectional unit numbers within your text as well as the ToC is to adjust the representation of the respective counters:
\documentclass{article}
\renewcommand{\thesection}{\arabic{section}.}
\renewcommand{\thesubsection}{\thesection\arabic{subsection}.}
\renewcommand{\thesubsubsection}{\thesubsection\arabic{subsubsection}.}
\begin{document}
\tableofcontents
\section{Introduction}
\end{document}
This solution is sufficient, but will also affect \references. For example \ref{sec:introduction} would return 1. which may look odd in the middle of a sentence: ... from section~\ref{sec:introduction} we can see ....
If you don't want periods ending your \references, you can use
\usepackage{secdot}% Adds . after sectional unit numbers
\usepackage{etoolbox}
% \patchcmd{<cmd>}{<search>}{<replace>}{<success>}{<failure>}
\patchcmd{\numberline}{\hfil}{.\hfil}{}{}
You're already familiar with what secdot does. The patch to \numberline is thanks to etoolbox which changes the default definition
\def\numberline#1{\hb#xt#\#tempdima{#1\hfil}}
into
\def\numberline#1{\hb#xt#\#tempdima{#1.\hfil}}
effectively inserting an ending-period as part of the number that is printed within the ToC. Note that this will also affect how figures/tables are displayed within the LoF/LoT. However, one can change that using scoping:
\begingroup
% The following patch will only affect entries in the ToC
\patchcmd{\numberline}{\hfil}{.\hfil}{}{}
\tableofcontents
\endgroup
\listoffigures
\listoftables
I'm trying to vertically center a title on a custom-sized page with latex. I've written the following code, but for some reason it doesn't center. Could someone please point me to what's wrong with it?
Thanks!
\documentclass{article}
\setlength{\pdfpagewidth}{88.184mm}
\setlength{\pdfpageheight}{113.854mm}
\usepackage[margin=0.5cm, paperwidth=88.184mm, paperheight=113.854mm]{geometry}
\title{[[title]]}
\date{[[date]]}
\author{[[author]]}
\begin{document}
\vspace{\fill}
\maketitle
\vspace{\fill}
\newpage
[[text]]
\end{document}
There are two small bugs in your code.
First, if you want the \vspace to work at the beginning or end of a page, you should use the starred version (\vspace*).
This would work, but \maketitle is a pretty complicated macro, and if used like in your example, it just puts the title at the second page. You can use the titlepage environment, which gives you much more command over how the title page looks like -- including the spacing. For example, you could use the following code:
\documentclass{article}
\setlength{\pdfpagewidth}{88.184mm}
\setlength{\pdfpageheight}{113.854mm}
\usepackage[margin=0.5cm, paperwidth=88.184mm, paperheight=113.854mm]{geometry}
\begin{document}
\begin{titlepage}
\vspace*{\fill}
\begin{center}
{Huge [[title]]}\\[0.5cm]
{Large [[author}\\[0.4cm]
[[date]]
\end{center}
\vspace*{\fill}
\end{titlepage}
[[text]]
\end{document}
\null % Empty line
\nointerlineskip % No skip for prev line
\vfill
\let\snewpage \newpage
\let\newpage \relax
\maketitle
\let \newpage \snewpage
\vfill
\break % page break
If you want to make everything work even with \maketitle put your \vspace*{\fill} inside the first and the last attribute, exp:
\title{**\vspace*{\fill}**[[title]]}
\date{[[date]]}
\author{[[author]]**\vspace*{\fill}**[[}
\begin{document}
\maketitle
\newpage
[[text]]
\end{document}
As in the answer by finrod, \maketitle is a pretty complicated macro, this is why I didn't feel like overwriting it myself (\renewcommand\maketitle{...). Nevertheless, copying, pasting and editing lines 170-201 of article.cls documentclass, I could add a new one to customize (\newcommand\mymaketitle{...) as follows:
\documentclass{article}
\setlength{\pdfpagewidth}{88.184mm}
\setlength{\pdfpageheight}{113.854mm}
\usepackage[margin=0.5cm, paperwidth=88.184mm, paperheight=113.854mm]{geometry}
\title{Title}
\date{Date}
\author{Author}
\makeatletter
\newcommand\mymaketitle{%
\begin{titlepage}
\null\vfil\vskip 40\p#
\begin{center}
{\LARGE \#title \par}
\vskip 2.5em
{\large \lineskip .75em \#author \par}
\vskip 1.5em
{\large \#date \par}
\end{center}\par
\#thanks
\vfil\null
\end{titlepage}
}
\makeatother
\begin{document}
\mymaketitle
Text
\end{document}
The output: