Why does "".leftPad ( 0 ) produce the same result as "".leftPad ( 1 )? - dart

Given the following code:
String indentation = "";
List < int > indents = [ 0, 1, 2, 4, 6, 8 ];
int length = 0;
for ( int i = 0; ( i <= 8 ); i++ )
{
if ( indents.contains ( i ) )
{
indentation = " ".padLeft(i);
length = indentation.length;
print ( "indent: $i length: $length indentation: '$indentation'");
}
}
I obtain the following results:
indent: 0 length: 1 indentation: ' '
indent: 1 length: 1 indentation: ' '
indent: 2 length: 2 indentation: ' '
indent: 4 length: 4 indentation: ' '
indent: 6 length: 6 indentation: ' '
indent: 8 length: 8 indentation: ' '
I don't think that the result of "".leftPad ( 0 ) should be the same as the result of "".leftPad ( 1 ). I can use the work-around of testing for an indent of zero. However, I believe that this is a compiler error.


Here is your problem:
indentation = " ".padLeft(i);
padLeft ensures that there is at least a certain number of spaces at the start of a string and will only add more if necessary. Because you are calling it on a string that is a single space (" "), padLeft(1) will see that there is indeed one space at the start of the string and will consider its job done. Hence, padLeft(0) and padLeft(1) will do the same amount of work - none at all.
Changing " " to "" produces the expected result:
indent: 0 length: 0 indentation: ''
indent: 1 length: 1 indentation: ' '
indent: 2 length: 2 indentation: ' '
indent: 4 length: 4 indentation: ' '
indent: 6 length: 6 indentation: ' '
indent: 8 length: 8 indentation: ' '

Related

field separator in awk

I have the following "input.file":
10 61694 rs546443136 T G . PASS RefPanelAF=0.0288539;AC=0;AN=1186;INFO=1.24991e-09 GT:DS:GP 0/0:0.1:0.9025,0.095,0.0025 0/0:0.1:0.9025,0.095,0.0025 0/0:0.1:0.9025,0.095,0.0025
My desired output.file is:
0.1, 0.1, 0.1
Using an awk script called "parse.awk":
BEGIN {FS = ":"}
{for (i = 4; i <= NF; i += 2) printf ("%s%c", $i, i +2 <= NF ? "," : "\n ");}
which is invocated with:
awk -f parse.awk <input.file >output.file
my current output.file is as follows:
0.1,0.1,0.1
i.e. no spaces.
Changing pasre.awk to:
BEGIN {FS = ":"}
{for (i = 4; i <= NF; i += 2) printf ("%s%c", $i, i +2 <= NF ? ", " : "\n ");}
did not change the output.file. What change(s) to parse.awk will yield the desired output.file?

You may use this awk:
awk -F: -v OFS=', ' '{
for (i = 4; i <= NF; i += 2) printf "%s%s", $i, (i < NF-1 ? OFS : ORS)}' file
0.1, 0.1, 0.1

Could you please try following. Written and tested it in
https://ideone.com/e26q7u
awk '
BEGIN {FS = ":"}
val!=""{ print val; val=""}
{for (i = 4; i <= NF; i += 2){
val=(val==""?"":val", ")$i
}
}
END{
if(val!=""){
print val
}
}
' Input_file

The problem is when you changed the output separator from a single comma (",") to comma with space (", "); you did not change the format string from %c to %s. So that is how to fix your script:
BEGIN {FS = ":"}
{for (i = 4; i <= NF; i += 2) printf ("%s%s", $i, i +2 <= NF ? ", " : "\n ");}
# ^ Change this

Zend 2 escaping single-quote

I am using Zend Framework 2 to generate the following escaped single-quote SQL query,
SELECT
`document`.*
FROM
`document`
WHERE
(
`document`.`document_taxon` LIKE '%Men\'s Health %' --escaped quote
AND `document`.`document_source_id` = ' 5 '
AND `document`.`document_published` = ' 1 '
AND `document`.`document_deleted` = ' 0 '
)
ORDER BY
`document_id` DESC
LIMIT 25 OFFSET 0
But I am getting this instead,
SELECT
`document`.*
FROM
`document`
WHERE
(
`document`.`document_taxon` LIKE '%Men's Health%'
AND `document`.`document_source_id` = ' 5 '
AND `document`.`document_published` = ' 1 '
AND `document`.`document_deleted` = ' 0 '
)
ORDER BY
`document_id` DESC
LIMIT 25 OFFSET 0
And here is my code
class DocumentTable extends TableGateway
{
....
$select=$this->getSql()->select();
$select->columns(array('*'));
$select->where
->NEST
->like('document_taxon', '%' . $label . '%')
->and
->equalTo('document_source_id', $sourceId)
->and
->equalTo('document_published', true)
->and
->equalTo('document_deleted', 0)
->UNNEST;
$select->order('document_id DESC');
$select->limit($limit);
$select->offset($offset);
...
}
I tried,
$this->getAdapter()->getPlatform()->quoteValue($string)
\Zend\Db\Sql\Expression("%". $label . "%")
str_replace("'", "\'", $label)
But I didn’t have much luck. I welcome any suggestion to solve this issue.

I worked it out. I was passing a normalized “label” value instead of the raw value. The above code snippet works fine.

Way to make an actual copy of the values of list to another in DART

After researching, I understand that when a list is set with values from another list, only the references are copied - not the actual values.
Initially, I want to create a list with the exact copy of the values of the original list. Then, after performing some operations to the original list, I wan to be able to copy the values from the copy list back to the original one.
I couldn't find a solution so far which doesn't set the values in the copy list to be the same as the new values in the original list.
The code below shows the logic of what I want to execute but couldn't find the right "function" to be able to create a "clone" a list.
class NumPairs {
NumPairs({this.first, this.second});
int first;
int second;
}
main() {
List<NumPairs> from = [
NumPairs(
first: 1,
second: 2,
),
NumPairs(
first: 2,
second: 1,
),
];
List<NumPairs> to = [];
to = from;
print('${to[0].first} ' + '${to[0].second} ' + ' inital TO');
print('${from[0].first} ' + '${from[0].second} ' + ' inital FROM');
to[0].first = 0;
to[0].second = 0;
print('${to[0].first} ' + '${to[0].second} ' + ' after zeroed TO = 0');
print(
'${from[0].first} ' + '${from[0].second} ' + ' FROM after TO is zeroed');
to = from;
print('${to[0].first} ' +
'${to[0].second} ' +
' after trying to copy to from FROM');
}
Output:
1 2 inital TO
1 2 inital FROM
0 0 after zeroed TO = 0
0 0 FROM after TO is zeroed
0 0 after trying to copy to from FROM

Sounds like you want to be able to clone objects in the original list. This can be done as follows.
class NumPairs {
NumPairs({this.first, this.second});
int first;
int second;
NumPairs.clone(NumPairs numpairs): this(first: numpairs.first, second: numpairs.second);
}
Where the named constructor 'clone' was added.
Now you can clone the original list using:
List<NumPairs> to = from.map((elem)=>NumPairs.clone(elem)).toList();
The original code becomes the following.
class NumPairs {
NumPairs({this.first, this.second});
int first;
int second;
NumPairs.clone(NumPairs numpairs): this(first: numpairs.first, second: numpairs.second);
}
main() {
List<NumPairs> from = [
NumPairs(
first: 1,
second: 2,
),
NumPairs(
first: 2,
second: 1,
),
];
//to = from;
// Gets replaced with the following which clones the 'from' list
List<NumPairs> to = from.map((elem)=>NumPairs.clone(elem)).toList();
print('${to[0].first} ' + '${to[0].second} ' + ' inital TO');
print('${from[0].first} ' + '${from[0].second} ' + ' inital FROM');
to[0].first = 0;
to[0].second = 0;
print('${to[0].first} ' + '${to[0].second} ' + ' after zeroed TO = 0');
print(
'${from[0].first} ' + '${from[0].second} ' + ' FROM after TO is zeroed');
to = from;
print('${to[0].first} ' +
'${to[0].second} ' +
' after trying to copy to from FROM');
}
Result
1 2 inital TO
1 2 inital FROM
0 0 after zeroed TO = 0
1 2 FROM after TO is zeroed
1 2 after trying to copy to from FROM

Rails lazy_high_charts: how to format tooltip label

I would to print into my charts the hours and minutes, for example "development: 27 h 30 m".
Now I have this:
In my script "data" represents "hours"
{
name: value.blank? ? "other" : value,
data: all_weeks.merge(data_weeks.to_h).values.map do |data_value|
data_value.nil? ? 0 : ( data_value.to_f / 60 ).round(2)
end
}
....
f.tooltip(
pointFormat: "<span style='color:{series.color}'>{series.name}</span>: <b>{point.y} h</b><br/>",
split: true
)
I have tried to set point.y into pointFormat but no have effects. ( Edit: pointFormat would a generic string! )
How can I solve? Thanks in advance.
Edit:
I solved adding:
LazyHighCharts::HighChart.new("container") do |f|
f.tooltip(
formatter: "\
function() { \
var s = []; \
s.push(this.x); \
this.points.forEach(function(point) { \
s.push('<b>' + point.series.name + '</b>: ' + Math.floor(point.y) + ' h ' + Math.floor((point.y % 1) * 60) + ' m'); \
}); \
return s; \
}".js_code,
split: true
)
....
end

Maybe you could introduce two variables, data_hours and data_minutes, and write a string interpolation with theses variables.
data_hours = data_value.to_i
data_minutes = ((data_value - data_hours) * 60).to_i
data_to_display = "#{data_hours} h #{data_minutes} m"
Hope it will help !
Written in 0.12 hours ;)

["dev: 27.5 h", "dev: 22 h", "dev: 0.3h"].map do |s|
s.gsub(/\d+(\.\d+)?\s*h/i) do |h|
h, m = h.to_f.divmod(1)
[
("#{h} h" unless h.zero?),
("#{(60 * m).round} m" unless m.zero?)
].compact.join(" ")
end
end
#⇒ ["dev: 27 h 30 m", "dev: 22 h", "dev: 18 m"]

Dynamic Relational operator in a where clause is Invalid (PL/SQL Oracle)

I am using Oracle 10g and I have the following stored procedure:
CREATE OR REPLACE PACKAGE BODY RF_PKG_STFCA_PositivePay
AS
PROCEDURE RF_SP_STFCA_PositivePay(IN_DATE IN NUMBER, IN_DATE_OPERATOR IN NVARCHAR2, OUT_DATA OUT CUR_DATA)
IS
/* this procedure returns a Ref Cursor with all the requested parameters
calling the stored procedure from an asp page (and anywhere else)
does not require posting a predefined number of records */
PaymentBatchNumber NVARCHAR2(4);
CurrencyCode NVARCHAR2(3);
TransactionCode NVARCHAR2(3);
Transit_BranchNumber NVARCHAR2(5);
BankAccountNumber NVARCHAR2(7);
ChequeNumber NVARCHAR2(8);
ChequeAmount NVARCHAR2(10);
ClientReference NVARCHAR2(19);
IssueDate NVARCHAR2(8);
PayeeName1 NVARCHAR2(60);
AddressLine1 NVARCHAR2(60);
AddressLine2 NVARCHAR2(60);
AddressLine4 NVARCHAR2(60);
AddressLine5 NVARCHAR2(60);
DateCreated NVARCHAR2(25);
DateVoided NVARCHAR2(25);
BEGIN
OPEN OUT_DATA FOR
SELECT LPAD(NVL(CD.PAYMENT_BATCH_NO, '0'), 4, '0') AS PaymentBatchNumber,
SUBSTR(NVL(CD.CURRENCY_ID, ' '), 1, 1) AS CurrencyCode,
NVL(CD.STATUS, ' ') AS TransactionCode,
LPAD(NVL(BA.BRANCH_ID, '0'), 5, '0') AS Transit_BranchNumber,
LPAD(NVL(BA.ACCOUNT_NO, '0'), 7, '0') AS BankAccountNumber,
LPAD(NVL(CD.CHECK_NO, '0') , 8, '0') AS ChequeNumber,
LPAD(TO_CHAR(NVL(CD.AMOUNT, 0)), 10, '0') AS ChequeAmount,
LPAD(NVL(CD.CONTROL_NO, '0'), 19, '0') AS ClientReference,
TO_CHAR(NVL(CD.CHECK_DATE, LPAD(' ', 8, ' ')), 'YYYYMMDD') AS IssueDate,
RPAD(NVL(CD.NAME, ' '), 60, ' ') AS PayeeName1,
RPAD(NVL(CD.ADDR_1, ' '), 60, ' ') AS AddressLine1,
RPAD(NVL(CD.ADDR_2, ' '), 60, ' ') AS AddressLine2,
RPAD(NVL(CD.CITY, '') || CASE WHEN CD.CITY IS NULL OR CD.STATE IS NULL THEN ' ' ELSE ', ' END || NVL(CD.STATE, ''), 60, ' ') AS AddressLine4,
RPAD(NVL(CD.ZIPCODE, ' '), 60, ' ') AS AddressLine5,
TO_CHAR(CD.CREATE_DATE, 'YYYYMMDDHH24MISS') AS DateCreated,
CASE WHEN CD.VOID_DATE IS NULL THEN ' ' ELSE TO_CHAR(CD.VOID_DATE, 'YYYYMMDDHH24MISS') END AS DateVoided
INTO PaymentBatchNumber, CurrencyCode, TransactionCode, Transit_BranchNumber, BankAccountNumber, ChequeNumber,
ChequeAmount, ClientReference, IssueDate, PayeeName1, AddressLine1, AddressLine2, AddressLine4, AddressLine5,
DateCreated, DateVoided
FROM BANK_ACCOUNT BA
INNER JOIN CASH_DISBURSEMENT CD ON BA.ID = CD.BANK_ACCOUNT_ID
WHERE BA.ACCOUNT_NO IS NOT NULL AND CD.CHECK_NO > 0 AND CD.STATUS != 'X' AND CD.AMOUNT != 0 AND ((TO_NUMBER(TO_CHAR(CD.CREATE_DATE, 'YYYYMMDDHH24MISS')) || IN_DATE_OPERATOR || IN_DATE) OR
(CASE WHEN CD.VOID_DATE IS NULL THEN 0 ELSE TO_NUMBER(TO_CHAR(CD.VOID_DATE, 'YYYYMMDDHH24MISS')) END || IN_DATE_OPERATOR || IN_DATE))
ORDER BY BA.BRANCH_ID, BA.ACCOUNT_NO;
END RF_SP_STFCA_PositivePay;
END RF_PKG_STFCA_PositivePay;
And I get the following error when entering this into SQL plus:
invalid relational operator
What I'm trying to do: I have this stored procedure that returns a secordset to my asp.net application using the REF CURSOR. I give it 2 input parameters. 1 is a date (IN_DATE) and 1 is an operator (IN_DATE_OPERATOR). The program works if "|| IN_DATE_OPERATOR ||" is replaces with either = or >= just the way I want it to work. The problem is based on what happens in the .Net application I want the operater it uses in the where clause to be either ">=" or "=" and I wont know which until runtime.
I know I'm doing this wrong but I don't know how to get oracle to reconize that IN_DATE_OPERATOR is a relational operator. I am open to other methods to have a dynamic operator (i tried CASE WHEN IN_DATE_OPERATOR = '=' THEN '=' ELSE '>=' END to no avail too) but I don't want to create a whole seperate stored procedure I will have to maintin in addition to this or a completely dynamic where clause. My ideal solution would make the least amount of changes to this query as possible. Any suggestions?
Edit: ok I've edited my query do be the following:
CREATE OR REPLACE PACKAGE BODY RF_PKG_STFCA_PositivePay
AS
PROCEDURE RF_SP_STFCA_PositivePay(IN_DATE IN NUMBER, IN_DATE_OPERATOR IN VARCHAR2, OUT_DATA OUT CUR_DATA)
IS
/* this procedure returns a Ref Cursor with all the requested parameters
calling the stored procedure from an asp page (and anywhere else)
does not require posting a predefined number of records */
SQL_Statement VARCHAR2(8000);
BEGIN
SQL_Statement := 'SELECT LPAD(NVL(CD.PAYMENT_BATCH_NO, ''0''), 4, ''0'') AS PaymentBatchNumber, ' ||
' SUBSTR(NVL(CD.CURRENCY_ID, '' ''), 1, 1) AS CurrencyCode, ' ||
' NVL(CD.STATUS, '' '') AS TransactionCode, ' ||
' LPAD(NVL(BA.BRANCH_ID, ''0''), 5, ''0'') AS Transit_BranchNumber, ' ||
' LPAD(NVL(BA.ACCOUNT_NO, ''0''), 7, ''0'') AS BankAccountNumber, ' ||
' LPAD(NVL(CD.CHECK_NO, ''0'') , 8, ''0'') AS ChequeNumber, ' ||
' LPAD(TO_CHAR(NVL(CD.AMOUNT, 0)), 10, ''0'') AS ChequeAmount, ' ||
' LPAD(NVL(CD.CONTROL_NO, ''0''), 19, ''0'') AS ClientReference, ' ||
' TO_CHAR(NVL(CD.CHECK_DATE, LPAD('' '', 8, '' '')), ''YYYYMMDD'') AS IssueDate, ' ||
' RPAD(NVL(CD.NAME, '' ''), 60, '' '') AS PayeeName1, ' ||
' RPAD(NVL(CD.ADDR_1, '' ''), 60, '' '') AS AddressLine1, ' ||
' RPAD(NVL(CD.ADDR_2, '' ''), 60, '' '') AS AddressLine2, ' ||
' RPAD(NVL(CD.CITY, '''') || CASE WHEN CD.CITY IS NULL OR CD.STATE IS NULL THEN '' '' ELSE '', '' END || NVL(CD.STATE, ''''), 60, '' '') AS AddressLine4, ' ||
' RPAD(NVL(CD.ZIPCODE, '' ''), 60, '' '') AS AddressLine5, ' ||
' TO_CHAR(CD.CREATE_DATE, ''YYYYMMDDHH24MISS'') AS DateCreated, ' ||
' CASE WHEN CD.VOID_DATE IS NULL THEN '' '' ELSE TO_CHAR(CD.VOID_DATE, ''YYYYMMDDHH24MISS'') END AS DateVoided ' ||
' FROM BANK_ACCOUNT BA ' ||
' INNER JOIN CASH_DISBURSEMENT CD ON BA.ID = CD.BANK_ACCOUNT_ID ' ||
' WHERE BA.ACCOUNT_NO IS NOT NULL AND CD.CHECK_NO > 0 AND CD.STATUS != ''X'' AND CD.AMOUNT != 0 ' ||
' AND ((TO_NUMBER(TO_CHAR(CD.CREATE_DATE, ''YYYYMMDDHH24MISS'')) ' || IN_DATE_OPERATOR || ' :1) ' ||
' OR (CASE WHEN CD.VOID_DATE IS NULL THEN 0 ELSE TO_NUMBER(TO_CHAR(CD.VOID_DATE, ''YYYYMMDDHH24MISS'')) END ' || IN_DATE_OPERATOR || ' :2)) ' ||
' ORDER BY BA.BRANCH_ID, BA.ACCOUNT_NO ';
OPEN OUT_DATA FOR SQL_Statement USING IN_DATE, IN_DATE;
END RF_SP_STFCA_PositivePay;
END RF_PKG_STFCA_PositivePay;/
but I get the following error:
LINE/COL ERROR
32/3 PL/SQL: Statement ignored
32/21 PLS-00382: expression is of wrong type

You would need to dynamically assemble the SQL statement in a string and then use that string to open the cursor. You'll need something along the lines of the get_cur procedure below where you assemble the SQL statement in a local VARCHAR2 variable including the placeholders for the bind variables and then open the cursor using the SQL statement you assembled and the bind variable you passed in.
SQL> create or replace procedure get_cur( p_date in date, p_operator in varchar2, p_cur out sys_refcursor )
2 as
3 l_sql_stmt varchar2(1000);
4 begin
5 l_sql_stmt := 'select * from emp where hiredate ' || p_operator || ' :1';
6 open p_cur for l_sql_stmt using p_date;
7 end;
8 /
Procedure created.
SQL> var rc refcursor;
SQL> exec get_cur( date '2001-01-01', '>=', :rc );
PL/SQL procedure successfully completed.
SQL> print rc;
no rows selected
SQL> exec get_cur( date '2001-01-01', '<=', :rc );
PL/SQL procedure successfully completed.
SQL> print rc;
EMPNO ENAME JOB MGR HIREDATE SAL COMM
---------- ---------- --------- ---------- --------- ---------- ----------
DEPTNO
----------
7369 SMITH CLERK 7902 17-DEC-80 801
20
7499 ALLEN SALESMAN 7698 20-FEB-81 1601 300
30
7521 WARD SALESMAN 7698 22-FEB-81 1251 500
30
EMPNO ENAME JOB MGR HIREDATE SAL COMM
---------- ---------- --------- ---------- --------- ---------- ----------
DEPTNO
----------
7566 JONES MANAGER 7839 02-APR-81 2976
20
7654 MARTIN SALESMAN 7698 28-SEP-81 1251 1400
30
7698 BLAKE MANAGER 7839 01-MAY-81 2851
30
EMPNO ENAME JOB MGR HIREDATE SAL COMM
---------- ---------- --------- ---------- --------- ---------- ----------
DEPTNO
----------
7782 CLARK MANAGER 7839 09-JUN-81 2451
10
7788 SCOTT ANALYST 7566 19-APR-87 3001
20
7839 KING PRESIDENT 17-NOV-81 5001
10
EMPNO ENAME JOB MGR HIREDATE SAL COMM
---------- ---------- --------- ---------- --------- ---------- ----------
DEPTNO
----------
7844 TURNER SALESMAN 7698 08-SEP-81 1501 0
30
7876 ADAMS CLERK 7788 23-MAY-87 1101
20
7900 JAMES CLERK 7698 03-DEC-81 951
30
EMPNO ENAME JOB MGR HIREDATE SAL COMM
---------- ---------- --------- ---------- --------- ---------- ----------
DEPTNO
----------
7902 FORD ANALYST 7566 03-DEC-81 3001
20
7934 MILLER CLERK 7782 23-JAN-82 1301
10
14 rows selected.
My guess is that you want something like this (obviously, since I don't have your tables or types, I can't test that this actually compiles so you'll likely need to correct typos)
CREATE OR REPLACE PACKAGE BODY RF_PKG_STFCA_PositivePay
AS
PROCEDURE RF_SP_STFCA_PositivePay(IN_DATE IN NUMBER, IN_DATE_OPERATOR IN NVARCHAR2, OUT_DATA OUT CUR_DATA)
IS
/* this procedure returns a Ref Cursor with all the requested parameters
calling the stored procedure from an asp page (and anywhere else)
does not require posting a predefined number of records */
l_sql_stmt VARCHAR2(4000);
BEGIN
l_sql_stmt := q'[SELECT LPAD(NVL(CD.PAYMENT_BATCH_NO, '0'), 4, '0') AS PaymentBatchNumber, ]' ||
q'[SUBSTR(NVL(CD.CURRENCY_ID, ' '), 1, 1) AS CurrencyCode, ]' ||
q'[NVL(CD.STATUS, ' ') AS TransactionCode, ]' ||
q'[LPAD(NVL(BA.BRANCH_ID, '0'), 5, '0') AS Transit_BranchNumber, ]' ||
q'[LPAD(NVL(BA.ACCOUNT_NO, '0'), 7, '0') AS BankAccountNumber, ]' ||
q'[LPAD(NVL(CD.CHECK_NO, '0') , 8, '0') AS ChequeNumber, ]' ||
q'[LPAD(TO_CHAR(NVL(CD.AMOUNT, 0)), 10, '0') AS ChequeAmount, ]' ||
q'[LPAD(NVL(CD.CONTROL_NO, '0'), 19, '0') AS ClientReference, ]' ||
q'[TO_CHAR(NVL(CD.CHECK_DATE, LPAD(' ', 8, ' ')), 'YYYYMMDD') AS IssueDate, ]' ||
q'[RPAD(NVL(CD.NAME, ' '), 60, ' ') AS PayeeName1, ]' ||
q'[RPAD(NVL(CD.ADDR_1, ' '), 60, ' ') AS AddressLine1, ]' ||
q'[RPAD(NVL(CD.ADDR_2, ' '), 60, ' ') AS AddressLine2, ]' ||
q'[RPAD(NVL(CD.CITY, '') || CASE WHEN CD.CITY IS NULL OR CD.STATE IS NULL THEN ' ' ELSE ', ' END || NVL(CD.STATE, ''), 60, ' ') AS AddressLine4, ]' ||
q'[RPAD(NVL(CD.ZIPCODE, ' '), 60, ' ') AS AddressLine5, ]' ||
q'[TO_CHAR(CD.CREATE_DATE, 'YYYYMMDDHH24MISS') AS DateCreated, ]' ||
q'[CASE WHEN CD.VOID_DATE IS NULL THEN ' ' ELSE TO_CHAR(CD.VOID_DATE, 'YYYYMMDDHH24MISS') END AS DateVoided ]' ||
q'[FROM BANK_ACCOUNT BA ]' ||
q'[INNER JOIN CASH_DISBURSEMENT CD ON BA.ID = CD.BANK_ACCOUNT_ID ]' ||
q'[WHERE BA.ACCOUNT_NO IS NOT NULL AND CD.CHECK_NO > 0 ]' ||
q'[AND CD.STATUS != 'X' ]' ||
q'[AND CD.AMOUNT != 0 ]' ||
q'[AND ((TO_NUMBER(TO_CHAR(CD.CREATE_DATE, 'YYYYMMDDHH24MISS'))]' || IN_DATE_OPERATOR || ':1') OR ' ||
q'[(CASE WHEN CD.VOID_DATE IS NULL THEN 0 ELSE TO_NUMBER(TO_CHAR(CD.VOID_DATE, 'YYYYMMDDHH24MISS')) END]' || IN_DATE_OPERATOR || ':2')) ' ||
q'[ORDER BY BA.BRANCH_ID, BA.ACCOUNT_NO ]';
OPEN out_data
FOR l_sql_stmt
USING in_date, in_date;
END RF_SP_STFCA_PositivePay;
END RF_PKG_STFCA_PositivePay;

Resources