I am using mongooseim and suddenly I started getting the below error:
[warning] Corrupted serialized SCRAM: <<>> and no longer able to connect with the users. I am unable to find if somehow I enabled authentication other than PLAIN TEXT authentication.
Also, If I register a new user from the terminal command like :mongooseimctl register user10 localhost pass, it always works. But from the database all the other users look same like user10 but all those don't work.
Ohh I find it myself, uppercase characters are not allowed in the username due to which it was throwing error the above error and make sure that pass_details vale should be null.
Related
Am using Kentico MVC v12 Service Pack.
Have enabled Preview feature and PageBuilder in Application_Start.
When running from localhost, can successfully edit relevant pages using PageBuilder as required.
However, when ran from a staging site, which is a clone of the localhost version, I am getting an error in the Site settings when I try to add a Presentation Url (I am definitely adding in a valid format with the starting "https://" included), which is required for the PageBuilder to be used in the Pages application, where I see this error:
An unexpected error occurred, see event log for more details. Event source: PageEdit, Event code PreviewLinkGeneration
Any assistance would be much appreciated.
Thanks.
Sites error
That error is basically only looking at the string of the URL (almost like a simple validation). Are you sure there is no whitespace before the value you entered in? I can re-create your issue if I type in a space character before the URL.
You can also try clearing the field and saving the form. Then re-enter a value.
If it is still not working, try re-signing all your macros in the system as I have seen the regular expression validation rules have issues if macros aren't working. Which is really what this check is:
I have a Windows 2012 R2 server and I managed to install the SonarQube 5.4 server as a Windows Service. I also set up a user so the service can actually start without the infamous "It started then stopped" error a lot of people seem to get. Before installing the server as a windows service, I checked that it worked using StartSonar.bat and it did work just fine, so I was confident when I made it into a service.
But when I try to access http://localhost:9000 there is nothing there, and it appears that shortly after starting the service it stops without any message at all. I can't tell if this is because I try to access the site (which gives me ERR_EMPTY_RESPONSEin Google Chrome) or if it just closes down after a short while.
Anyone got any insight?
I'm a beginner. I came across the same issue and fixed it.
Ensure that the database is running.
My log file (located at sonarqube_home_dir/logs/sonar.log) included the following statement.
Caused by: org.h2.jdbc.JdbcSQLException: Wrong user name or password [28000-176]
Since I'm using the default database, I commented below lines
#sonar.jdbc.username=***
#sonar.jdbc.password=***
at sonarqube_home_dir/conf/sonar.properties.
This must happen due to many reasons like connection problems, permission problems so First, you have to see the logs. /sonarqube-7.6/logs$ tailf sonar.log. then you can find the reason. Once I had the same problem so I did like that. my error is something Directory does not exist: lib/jdbc/mysql
org.sonar.process.MessageException: Directory does not exist: lib/jdbc/mysql reason is I uninstall MySQL and remove all folders name contains "MySQL".
just check whether port 9001 already in used, stop it if already in used.
I have what I perceive to be an unusual "syntax" error (at least to my very rookie junior dev self it is unusual)
I have a WP website that was originally built and designed by a friend, who wanted me to help. After logging on and attempting to upload a new theme to the website, legendsofthestands.com, I received the following error message:
Parse error: syntax error, unexpected end of file in
/home/kcsuperf/public_html/legendsofthestands.com/wp-content/themes/zerif-lite/functions.php
on line 1028
The problem isn't so much the error message, it is now that I'm not able to access the admin login page without seeing the same error. My understanding is that this is due to plugins that need to be deactivated so that I can access the /wp-admin page. However, when I try to access the admin console via FTP, I keep getting the 530 login failed error message.
I'm not sure which route to go at this point, whether I should try and contact the hosting company to resolve the logon issue, or if there is a way to fix the parse/syntax issue without having seen the code (since it is a WP-installed site).
Any assistance is appreciated.
I'm trying to install Umbraco on an ASP.NET environment. After I downloaded the umbraco nuget package I tried to run the installation wizard, by building and running the project. All is fine and good, if i take the default database configuration, but if I want to customize my configuration, it fails and says :
"Could not connect to database"
I'm trying to configure it to use my local SQLExpress database, but I just cannot get it working. I have both tried putting in the server information and connecting via. a connection string, via. the wizard. It produces the same error every time.
I have made a database called umbracoblog and created an admin user, with credentials. He has dbowner etc. for the database. Besides that, I have also given full permissions to IIS_IUSRS and Network Service accounts for the project and all subdirectories, and it still doesn't work.
These are some of the connection strings I have tried:
datalayer=SqlServer;Data Source=.\SQLExpress;Initial Catalog=umbracoblog;User Id=admin;Password=********;
datalayer=SqlServer;Data Source=127.0.0.1\SQLExpress;Initial Catalog=umbracoblog;User Id=admin;Password=*******;
I have also tried putting in the connectionstring into the web.config, manually, but that just makes the project load infinitely in the browser, when I run it.
It's starting to get frustrating, that I cannot even get past the configuration of Umbraco, because it look very cool. I have tried everything I was able to found online. Have anyone gone through this and know what I need to do ?
Start again - clear out and remove the umbracoDbDSN connection string entirely from your web.config and reset the umbracoConfigurationStatus AppSetting back to empty if it has been populated.
Use the Wizard to configure the database - if it's still having problems connecting then here's a few things to check:
Check the Log file here: ~/App_Settings/Logs/UmbracoTraceLog.txt - does that show up any errors?
Make sure you can connect to the database using other clients - if Umbraco can't connect to it, chances are something else won't be able to as well.
What happens if you use Integrated Authentication? If that works, then it's most likely an issue with the username and password you specified.
The password I had for the SQL Server user had a character that the installation UI didn't accept. I changed the password to remove special characters and it was able to connect to the server again. I could successfully log in through SSMS with the previous password.
I've been trying to debug a SQL Server database error in one of our rails apps. The problem is that the database name, as added in database.yaml, has a '.' in it ('testdb.v1'). It results in the error:
TinyTds::Error: Database 'testdb' does not exist. Make sure that the name is entered correctly.
Thinking that this was a YAML vs. Rails issue with quoting of the '.' character, I opened the app in rails console and tried every kind of Ruby quoting I could think of, but I get the same error each time.
Somewhere down the line from the assignment of the database name in my model.connection_config, the '.' is being interpreted as a format specifier and the suffix is dropped from the name. model.connection_config['database'] has 'testdb.v1', as it should, but clearly that's not what's being handed to SQL Server.
I wasn't sure if this is a rails issue or a SQL Server issue, though a C# app I tossed together manages to open the database without problems. Thus, I assume it's a rails/ActiveRecord issue. Unfortunately, I don't have the option of changing the database name.
Is there a way to quote the '.' character so that it will maintain the '.' and the suffix in the database name?
Further investigation took me to the github page for the activerecord-sqlserver-adapter
There, I found issues 230 and 226, with similar problems to mine. Apparently using '.' in database, table or column names will present similar problems. As these were created in 2012 and are still open, it doesn't look like a fix is coming anytime soon. In the comments there are a few ideas to monkey-patch it into working. Guess that's the approach I'll have to take to get this working.
UPDATE: For anyone stuck with a similar problem, and the database name is the only issue (not tables or columns), the solution we went with was an end-run around the sqlserver-adapter. We created a SQL user for each database, and assigned a default database to that user. Then, we connected with the user login but left the database name null. SQL Server will connect to the default database in that case.