I'm building a box where the user will put their foot and then have measurements of their feet taken.
My 1st tier goal is to take basic measurements and my reach goal is to build a 3d model of the person's foot.
Here are what some images from my first attempts and prototyping.
back of the foot | inside of the foot | outside of the foot | top of the foot
So, my big advantage is that I have a lot of control over the scene.
I want to use this fact to set things up so I can get reliable measurements using pictures.
So my questions are as follows:
1) What is the best way to set the scene up? Right now I'm going to have a blue background, lights, and a contrasting sock to create a consistent internal image. Is there a more 'optimal' contrast to use? As you can see below, it's working decently.
2) What's an easy way for me to get reliable pixel to mm measurements? I can use a patterned sock (to increase feature density) and then two cameras from each viewpoint, but it would be great to minimize the number of cameras I need.
I'm going to leave the questions there as not to overload this post - but if people have any other tips it would be very helpful. Thank you!
My approach to 1) would essentially be a "green screen" or "blue screen".
The idea is to carefully illuminate the background so that there are no shadows. Then, you can apply a color threshold, and everything that is not that specific color is the foreground. So far in your images, there is a quite a bit of shadow, which may be able to be eliminated by careful lighting. You'll have to experiment with how much of that is an issue for you.
2) This a little tougher, but possible. You will need to know the position and direction of your cameras, the lens parameters (such as F/#), the sensor parameters (pixel pitch/spacing). With this information, you should be able to locate the extrema of the foot and get some measurements. Here's a general diagram of how this might work. You could use the top view to locate the mid-line of the foot so you know how far it is from the side cameras. Then, you have all the information you need to solve of pixel to real-space measurements. The top camera is easy; since everything is in a plane (assuming the camera is properly aligned and rectified) all you have to do is put a ruler on the floor and take some pictures of it. Then, you can measure the pixels to real-space conversion directly from the image.
For your 3-d modeling issue, I'd like to point out that you don't actually have to get a full point cloud. You could just get a model of a foot and scale it for display based on the measurements you make. In any case, good luck on your project!
Related
We have this camera array arranged in an arc around a person (red dot). Think The Matrix - each camera fires at the same time and then we create an animated gif from the output. The problem is that it is near impossible to align the cameras exactly and so I am looking for a way in OpenCV to align the images better and make it smoother.
Looking for general steps. I'm unsure of the order I would do it. If I start with image 1 and match 2 to it, then 2 is further from three than it was at the start. And so matching 3 to 2 would be more change... and the error would propagate. I have seen similar alignments done though. Any help much appreciated.
Here's a thought. How about performing a quick and very simple "calibration" of the imaging system by using a single reference point?
The best thing about this is you can try it out pretty quickly and even if results are too bad for you, they can give you some more insight into the problem. But the bad thing is it may just not be good enough because it's hard to think of anything "less advanced" than this. Here's the description:
Remove the object from the scene
Place a small object (let's call it a "dot") to position that rougly corresponds to center of mass of object you are about to record (the center of area denoted by red circle).
Record a single image with each camera
Use some simple algorithm to find the position of the dot on every image
Compute distances from dot positions to image centers on every image
Shift images by (-x, -y), where (x, y) is the above mentioned distance; after that, the dot should be located in the center of every image.
When recording an actual object, use these precomputed distances to shift all images. After you translate the images, they will be roughly aligned. But since you are shooting an object that is three-dimensional and has considerable size, I am not sure whether the alignment will be very convincing ... I wonder what results you'd get, actually.
If I understand the application correctly, you should be able to obtain the relative pose of each camera in your array using homographies:
https://docs.opencv.org/3.4.0/d9/dab/tutorial_homography.html
From here, the next step would be to correct for alignment issues by estimating the transform between each camera's actual position and their 'ideal' position in the array. These ideal positions could be computed relative to a single camera, or relative to the focus point of the array (which may help simplify calculation). For each image, applying this corrective transform will result in an image that 'looks like' it was taken from the 'ideal' position.
Note that you may need to estimate relative camera pose in 3-4 array 'sections', as it looks like you have a full 180deg array (e.g. estimate homographies for 4-5 cameras at a time). As long as you have some overlap between sections it should work out.
Most of my experience with this sort of thing comes from using MATLAB's stereo camera calibrator app and related functions. Their help page gives a good overview of how to get started estimating camera pose. OpenCV has similar functionality.
https://www.mathworks.com/help/vision/ug/stereo-camera-calibrator-app.html
The cited paper by Zhang gives a great description of the mathematics of pose estimation from correspondence, if you're interested.
I am trying to build a solution where I could differentiate between a 3D textured surface with the height of around 200 micron and a regular text print.
The following image is a textured surface. The black color here is the base surface.
Regular text print will be the 2D print of the same 3D textured surface.
[EDIT]
Initial thought about solving this problem, could look like this:
General idea here would be, images shot at different angles of a 3D object would be less related to each other than the images shot for a 2D object in the similar condition.
One of the possible way to verify could be: 1. Take 2 images, with enough light around (flash of the camera). These images should be shot at as far angle from the object plane as possible. Say, one taken at camera making 45 degree at left side and other with the same angle on the right side.
Extract the ROI, perspective correct them.
Find GLCM of the composite of these 2 images. If the contrast of the GLCM is low, then it would be a 3D image, else a 2D.
Please pardon the language, open for edit suggestion.
General idea here would be, images shot at different angles of a 3D object would be less related to each other than the images shot for a 2D object in the similar condition.
One of the possible way to verify could be:
1. Take 2 images, with enough light around (flash of the camera). These images should be shot at as far angle from the object plane as possible. Say, one taken at camera making 45 degree at left side and other with the same angle on the right side.
Extract the ROI, perspective correct them.
Find GLCM of composite of these 2 images. If contrast of the GLCM is low, then it would be a 3D image, else a 2D.
Please pardon the language, open for edit suggestion.
If you can get another image which
different angle or
sharper angle or
different lighting condition
you may get result. However, using two image with different angle with calibrate camera can get stereo vision image which solve your problem easily.
This is a pretty complex problem and there is no plug-in-and-go solution for this. Using light (structured or laser) or shadow to detect a height of 0.2 mm will almost surely not work with an acceptable degree of confidence, no matter of how much "photos" you take. (This is just my personal intuition, in computer vision we verify if something works by actually testing).
GLCM is a nice feature to describe texture, but it is, as far as I know, used to verify if there is a pattern in the texture, so, I believe it would output a positive value for 2D print text if there is some kind of repeating pattern.
I would let the computer learn what is text, what is texture. Just extract a large amount of 3D and 2D data, and use a machine learning engine to learn which is what. If the feature space is rich enough, it may be able to find a way to differentiate one from another, in a way our human mind wouldn't be able to. The feature space should consist of edge and colour features.
If the system environment is stable and controlled, this approach will work specially well, since the training data will be so similar to the testing data.
For this problem, I'd start by computing colour and edge features (local image pixel sums over different edge and colour channels) and try a boosted classifier. Boosted classifiers aren't the state of the art when it comes to machine learning, but they are good at not overfitting (meaning you can just insert as much data as you want), and will most likely work in a stable environment.
Hope this helps,
Good luck.
I have a very specific application in which I would like to try structure from motion to get a 3D representation. For now, all the software/code samples I have found for structure from motion are like this: "A fixed object that is photographed from all angle to create the 3D". This is not my case.
In my case, the camera is moving in the middle of a corridor and looking forward. Sometimes, the camera can look on other direction (Left, right, top, down). The camera will never go back or look back, it always move forward. Since the corridor is small, almost everything is visible (no hidden spot). The corridor can be very long sometimes.
I have tried this software and it doesn't work in my particular case (but it's fantastic with normal use). Does anybody can suggest me a library/software/tools/paper that could target my specific needs? Or did you ever needed to implement something like that? Any help is welcome!
Thanks!
What kind of corridors are you talking about and what kind of precision are you aiming for?
A priori, I don't see why your corridor would not be a fixed object photographed from different angles. The quality of your reconstruction might suffer if you only look forward and you can't get many different views of the scene, but standard methods should still work. Are you sure that the programs you used aren't failing because of your picture quality, arrangement or other reasons?
If you have to do the reconstruction yourself, I would start by
1) Calibrating your camera
2) Undistorting your images
3) Matching feature points in subsequent image pairs
4) Extracting a 3D point cloud for each image pair
You can then orient the point clouds with respect to one another, for example via ICP between two subsequent clouds. More sophisticated methods might not yield much difference if you don't have any closed loops in your dataset (as your camera is only moving forward).
OpenCV and the Point Cloud Library should be everything you need for these steps. Visualization might be more of a hassle, but the pretty pictures are what you pay for in commercial software after all.
Edit (2017/8): I haven't worked on this in the meantime, but I feel like this answer is missing some pieces. If I had to answer it today, I would definitely suggest looking into the keyword monocular SLAM, which has recently seen a lot of activity, not least because of drones with cameras. Notably, LSD-SLAM is open source and may not be as vulnerable to feature-deprived views, as it operates directly on the intensity. There even seem to be approaches combining inertial/odometry sensors with the image matching algorithms.
Good luck!
FvD is right in the sense that your corridor is a static object. Your scenario is the same and moving around and object and taking images from multiple views. Your views are just not arranged to provide a 360 degree view of the object.
I see you mentioned in your previous comment that the data is coming from a video? In that case, the problem could very well be the camera calibration. A camera calibration tells the SfM algorithm about the internal parameters of the camera (focal length, principal point, lens distortion etc.) In the absence of knowledge about these, the bundler in VSfM uses information from the EXIF data of the image. However, I don't think video stores any EXIF information (not a 100% sure). As a result, I think the entire algorithm is running with bad focal length information and cannot solve for the orientation.
Can you extract a few frames from the video and see if there is any EXIF information?
So what I need to do is measuring a foot length from an image taken by an ordinary user. That image will contain a foot with a black sock wearing, a coin (or other known size object), and a white paper (eg A4) where the other two objects will be upon.
What I already have?
-I already worked with opencv but just simple projects;
-I already started to read some articles about Camera Calibration ("Learn OpenCv") but still don't know if I have to go so far.
What I am needing now is some orientation because I still don't understand if I'm following right way to solve this problem. I have some questions: Will I realy need to calibrate camera to get two or three measures of the foot? How can I find the points of interest to get the line to measure, each picture is a different picture or there are techniques to follow?
Ps: sorry about my english, I really have to improve it :-/
First, some image acquisition things:
Can you count on the black sock and white background? The colors don't matter as much as the high contrast between the sock and background.
Can you standardize the viewing angle? Looking directly down at the foot will reduce perspective distortion.
Can you standardize the lighting of the scene? That will ease a lot of the processing discussed below.
Lastly, you'll get a better estimate if you zoom (or position the camera closer) so that the foot fills more of the image frame.
Analysis. (Note this discussion will directed to your question of identifying the axes of the foot. Identifying and analyzing the coin would use a similar process, but some differences would arise.)
The next task is to isolate the region of interest (ROI). If your camera is looking down at the foot, then the ROI can be limited to the white rectangle. My answer to this Stack Overflow post is a good start to square/rectangle identification: What is the simplest *correct* method to detect rectangles in an image?
If the foot lies completely in the white rectangle, you can clip the image to the rect found in step #1. This will limit the image analysis to region inside the white paper.
"Binarize" the image using a threshold function: http://opencv.willowgarage.com/documentation/cpp/miscellaneous_image_transformations.html#cv-threshold. If you choose the threshold parameters well, you should be able to reduce the image to a black region (sock pixels) and white regions (non-sock pixel).
Now the fun begins: you might try matching contours, but if this were my problem, I would use bounding boxes for a quick solution or moments for a more interesting (and possibly robust) solution.
Use cvFindContours to find the contours of the black (sock) region: http://opencv.willowgarage.com/documentation/structural_analysis_and_shape_descriptors.html#findcontours
Use cvApproxPoly to convert the contour to a polygonal shape http://opencv.willowgarage.com/documentation/structural_analysis_and_shape_descriptors.html#approxpoly
For the simple solution, use cvMinRect2 to find an arbitrarily oriented bounding box for the sock shape. The short axis of the box should correspond to the line in largura.jpg and the long axis of the box should correspond to the line in comprimento.jpg.
http://opencv.willowgarage.com/documentation/structural_analysis_and_shape_descriptors.html#minarearect2
If you want more (possible) accuracy, you might try cvMoments to compute the moments of the shape. http://opencv.willowgarage.com/documentation/structural_analysis_and_shape_descriptors.html#moments
Use cvGetSpatialMoment to determine the axes of the foot. More information on the spatial moment may be found here: http://en.wikipedia.org/wiki/Image_moments#Examples_2 and here http://opencv.willowgarage.com/documentation/structural_analysis_and_shape_descriptors.html#getspatialmoment
With the axes known, you can then rotate the image so that the long axis is axis-aligned (i.e. vertical). Then, you can simply count pixels horizontally and vertically to obtains the lengths of the lines. Note that there are several assumptions in this moment-oriented process. It's a fun solution, but it may not provide any more accuracy - especially since the accuracy of your size measurements is largely dependent on the camera positioning issues discussed above.
Lastly, I've provided links to the older C interface. You might take a look at the new C++ interface (I simply have not gotten around to migrating my code to 2.4)
Antonio Criminisi likely wrote the last word on this subject years ago. See his "Single View Metrology" paper , and his PhD thesis if you have time.
You don't have to calibrate the camera if you have a known-size object in your image. Well... at least if your camera doesn't distort too much and if you're not expecting high quality measurements.
A simple approach would be to detect a white (perspective-distorted) rectangle, mapping the corners to an undistorted rectangle (using e.g. cv::warpPerspective()) and use the known size of that rectangle to determine the size of other objects in the picture. But this only works for objects in the same plane as the paper, preferably not too far away from it.
I am not sure if you need to build this yourself, but if you just need to do it, and not code it. You can use KLONK Image Measurement for this. There is a free and payable versions.
I'm trying to do an application which, among other things, is able to recognize chess positions on a computer screen from screenshots. I have very limited experience with image processing techniques and don't wish to invest a great amount of time in studying this, as this is just a pet project of mine.
Can anyone recommend me one or more image processing techniques that would yield me a good result?
The conditions are:
The image is always crispy clean, no noise, poor light conditions etc (since it's a screenshot)
I'm expecting a very low impact on computer performance while doing 1 image / second
I've thought of two modes to start the process:
Feed the piece shapes to the program (so that it knows what a queen, king etc. looks like)
just feed the program an initial image which contains the startup position, from which the program can (after it recognizes the position of the board) pick each chess piece
The process should be relatively easy to understand, as I don't have a very good grasp of image processing techniques (yet)
I'm not interested in using any specific technology, so technology-agnostic documentation would be ideal (C/C++, C#, Java examples would also be fine).
Thanks for taking the time to read this, and I hope to get some good answers.
It' an interesting problem, but you need to specify a lot more than in your original question in order to find an acceptable answer.
On the input images: "screenshots" is quote vague a category. Can you assume that the chessboard will always be entirely in view? Will you have multiple views of the same board? Can you assume that no pieces will be partially or completely occluded in all views?
On the imaged objects and the capture system: will the same chessboard and pieces be used, under very similar illumination? Will the same lens/camera/digitization pipeline be used?
Salut Andrei,
I have done a coin counting algorithm from a picture so the process should be helpful.
The algorithm is called Generalized Hough transform
Make the picture black and white, it is easier that way
Take the image from 1 piece and "slide it over the screenshot"
For each cell you calculate the nr of common pixel in the 2 images
Where you have the largest number there you have the piece
Hope this helps.
Yeah go with Salut Andrei,
Convert the picture into greyscale
Slice into 64 squares and store in array
Using Mat lab can identify the pieces easily
Color can be obtained from Calculating the percentage of No. dot pixels(black pixels)
threshold=no.black pixels /no. of black pixels + no. of white pixels,
If ur value is above threshold then WHITE else BLACK
I'm working on a similar project in c# finding which piece is which isn't the hard part for me. First step is to find a rectangle that shows just the board and cuts everything else out. I first hard-coded it to search for the colors of the squares but would like to make it more robust and reliable regardless of the color scheme. Trying to make it find squares of pixels that match within a certain threshold and extrapolate the board location from that.