I know how to use tabBarController.
But I dont Know How to Create A Tabbed Page Like The Attached Image.
Whats The Name Of This Type Of Tab?
This is not any type of Tab. You can use a collectionView or a stackView for "Tabs" and a UIPageViewController for changing viewControllers.
You can check CocoaControls for similar controls, download source code and check their construction. You can possible do it with SegmentedControls (Or Custom UIViews for single Tab and draw in ScrollView) and UIScrollView as Content View (with Pagination On) as well, but it depends how much customisation is needed.
Trust me, it's REALLY tricky to obtain what you want with the iOS components. There are a lot of details that you will miss.
When I tried myself to build the same thing, it was like "ok I think I am reinventing the wheel, is not straight forward as I though, it require a lot of work"
You know you have to consider a lot of stuff like an User that start to scroll as a crazy between the pages and then tap on one tab bar button, and so on. Trust me, it's easy to have a working implementation, but it's really really difficult to obtain a PERFECT implementation
I decided to go for a library
https://github.com/aokizen/SPSlideTabBarController
https://github.com/xmartlabs/XLPagerTabStrip
but there are others that are all good to achieve what you want
Anyway if you want to go for your personal implementation I suggest a Segmented Control in the upper side and a PageViewController (maybe inside a Container View)
Related
I have checked out several libraries, videos and online blogs on how to make a side navigation drawer in iOS, but none of them have been able to provide a simple solution to create a side navigation drawer where you are not limited to just a TableView. I want to be able to add different UIViews to the side drawer. This is the kind of Side Drawer I am trying to create :
Screenshot
Most of the libraries cant allow custom views inside the side drawer, but I want to create a small view like this at the top of the drawer UITableView.
So far, I have tried these libraries but each of them lack an essential feature :
https://github.com/mutualmobile/MMDrawerController : Only supports a list of items(basically only a tableview) and not custom views like the one I want to add and like the one gmail has, which displays the profile picture along with the email id.
https://github.com/jonkykong/SideMenu : Same Reason.
https://github.com/handsomecode/InteractiveSideMenu : Animation is too fancy.
https://github.com/evnaz/ENSwiftSideMenu : Only supports a TableView in the side drawer.
After having developed a few android applications, I was quite surprised that iOS didn't have an equivalent of the android DrawerLayout, and when I searched for libraries I could not find a single one that had the right classic design that is most used. I read somewhere that adding a side drawer was a bad design choice, but in my application, I have already used all of my screen space and need a way to give the user quick access to 20-25 list options along with a small view at the top. I figured adding a side drawer was the perfect way to do so, but unfortunately I haven't gotten very far trying to make it.
All help will be appreciated!
SlideMenuControllerSwift will let you stick any viewController with any layout you want into your menu. Its really not that hard to make your own slide out either. Your options are: 1. You make a container and every view in the app goes int he container along with the menu and the container animates the menu in an out. Or 2. You just make a menu singleton and when it gets triggered it adds its view on top of the main window, which will cover the current view controller.
You can try this one also, NavigationDrawer
I have design the UI for the below screen as I am little bit confuse that what should have to use for the below screen. As you seen the on the screen below things:
1.Scrolling part of Images swap.
2.Again another Scrolling images Swap.
So here for the scrolling Images what should I use its Collection View for both or Pagecontrol for one and Collection view for other. Please suggest me.
Thanks and Appreciate for the help...
Use UITableView and in its cell use UICollectionCell so that you can scroll horizontally and vertically.
see Back image, this is how you can implemented output looked like.
As Tinu Dahiya pointed it correctly, You should use tableView and custom tableViewCells to achieve your UI design. This approach will also make your coding easy to handle dynamic contents which you might be fetching from server. For your reference you can directly use this control from cocoa controls. This control is ready made dish for you, you just have to implement your logic to achieve your functionality.
Today I tried to implement a vertical tabbar for iPad. I checked a lot of questions on Stackoverflow and other sites but couldn't find the appropriate answer. Here are what I found:
https://github.com/futuresimple/FSVerticalTabBarController
https://github.com/nst/SEVerticalTabBar
https://github.com/NOUSguide/NGTabBarController
In my opinion, the third component is great. However, I guess I'll have to customize a lot before I can use to create this following UI:
So do you know any components/libraries that match my UI? It would be great if anyone can suggest me a correct one. Thanks.
Try to use FSVerticalTabBarController. I have used it and it is easy to modify...
You can try this component IIViewDeckController. Its very light weight.
Usually it will be used for Stackview, left Menu kind of UI.
But you can do a small trick like below to achieve your design above.
Steps:
The component have left, right, top, bottom and center stack of controllers.
Use a UITableView on your LeftViewController to design your above UI.
Each index will act as a container of OneViewController.
Clicking one cell of your tableview will place the appropriate ViewController in the center controller of IIViewDeckViewController.
Its very easy, I guess you will like it. Just take some time to go through their examples.
Hope it will be useful
I translated futuresimple/FSVerticalTabBarController into Swift 5.
My repo is https://github.com/coyingcat/VerticalTabBar
Apple's doc Implementing a Container View Controller is great also
I wanna put "tabs" at the top of the view and I don't find in object library... does anyone knows? Thanks for the help.
Examples here:
http://imagizer.imageshack.us/a/img829/1808/47bw.jpg
http://imagizer.imageshack.us/a/img822/7048/oaum.jpg
There's a difference between navigational tabs like the second screen shot has and just a "tabbed" division of information like the first. The first one stays a single screen while the second one could also be considered an application that has different subviews under that tabbed navigation. The first screen is trivial and you should do this with UIViews with UILabels nested into them.
The second screen is more interesting. I don't think it's a good idea to use the built in tabbed navigation handlers because it's just not a good fit for that kind of layout. You could do it but you're writing a lot of code to get it completely like you want it. But if you would want to you could divide the screen with custom containers and trigger segues in the bottom part from the UIButtons you put on top and it's a pretty good way to handle those kind of segues from within Interface Builder.
More information:
http://sandmoose.com/post/35714028270/storyboards-with-custom-container-view-controllers
https://developer.apple.com/library/ios/featuredarticles/ViewControllerPGforiPhoneOS/CreatingCustomContainerViewControllers/CreatingCustomContainerViewControllers.html
This question already has answers here:
iOS horizontal SlideView with vertical menu
(5 answers)
Closed 9 years ago.
How do you make a viewcontroller that slides out and takes up part of the screen such as ones which may be seen on popular apps like Facebook, Rdio and Tinder? So you do a side swipe and a viewController will slide out and take up approximately three quarters of the screen and may have a tableView within it? Also, would this design be made using storyboard or interface builder?
What i used in my project was MMDrawerController (Mutual Mobile Drawer Controller)
https://github.com/mutualmobile/MMDrawerController
it provides full control and variety of effects, transitions, guestures. also you can slide the panel from either left or right side.
There are a very large amount of frameworks that do this. The two most popular ones are JASidePanels (which I personally use) and ECSSlidingViewController. You could also implement it yourself, but this will be more complicated. A place to start is to have a "bottom view controller" that loads and manages the other view controllers, or at least manages their views. If you have the patience, this route is obviously preferable as you can then really control the behavior of your app. That being said, these are great starts.
In these examples they use a combination of both programmatic management of view controllers, and the story board. It really depends on how you want to manage it personally. I personally like to "paint" my view controller basics in the story board and instantiate them using their storyboard IDs in order to give myself a good idea of what is going on visually.
You should Tate a look at ViewDeck. Just download it and take a look at it it's higly customazible and it's Identical to the facebook app