I'm trying to run Jupyterhub in a Docker container (see this link). I run the command listed under "Docker" and the container successfully runs but when I go to connect at http://localhost:8000, I get a message saying "The connection was reset."
I have also tried creating a Dockerfile that makes use of jupyterhub/configurable-http-proxy because I thought that might have been what was missing but I couldn't connect with that either. Additionally I tried adding a jupyterhub_config.py to the container with no luck.
Is there a step I am missing or something else that I need to configure to get Jupyterhub running in a Docker container?
This was caused by a short-lived bug in version 0.9. Pulling a newer version using
docker pull jupyterhub/jupyterhub
solved this issue.
Related
I'm new to using Docker (never used it before) and I'm running into these errors:
I installed the Docker for Windows and following the steps on this
tutorial, but Docker Desktop doesn't load up for me at all.
I tried to run the docker pull hello-world command but I'm getting the error: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
How do I fix this? Thanks
I am currently despairing at the attempt of setting up a docker build step in Atlassian Bamboo.
For starters, I just want to create a build configuration that runs the hello-world image as a proof of confluence. So far, I have failed.
I have tried following the steps on https://confluence.atlassian.com/bamboo0609/using-bamboo/jobs-and-tasks/configuring-tasks/configuring-the-docker-task-in-bamboo , but to no avail.
My setup is this:
We have Bamboo installed on an Ubuntu server. I also installed Docker on that server and added the bamboo user to the docker usergroup and restarted the server to make sure the permission change takes effect. At this point, docker run hello-world works when I run it directly on the server. I can also confirm that this is the server that Bamboo runs on since Bamboo went offline whenever I restarted the server that I installed Docker on.
Then, I have added the docker capability to the server (the agent is the default agent, so it inherits this capability from the server). As the docker path, I have tried various things, none of which worked (aka, the following errors remained the same for each of these):
/snap/docker (the first folder that I found on a manual search)
/usr/bin/docker (the recommended path, though on inspecting the Ubuntu server I quickly found out that no docker folder exists under /usr/bin on the Ubuntu derver)
/var/snap/docker/common/var-lib-docker (the path that Docker returns as its Root Directory when I run docker info on the Ubuntu server)
/var/snap/docker (for good measure)
Now, for the runner, I have tried two different approaches.
First, I tried using a Docker runner with the following settings:
Command: Run a Docker container
Docker image: hello-world
This returns the following error message:
┊
Error occurred while running Task 'Hello World Docker Test(5)' of type com.atlassian.bamboo.plugins.bamboo-docker-plugin:task.docker.cli.com.atlassian.bamboo.task.TaskException: Failed to execute task
┊
Caused by: com.atlassian.bamboo.docker.DockerException: Error running Docker run command
┊
Caused by: com.atlassian.utils.process.ProcessException: Error executing /snap/docker run --volume /var/atlassian/application-data/bamboo/xml-data/build-dir/CAM-DOC-JOB1:/data --workdir /data --rm hello-world
┊
The second was just to run a shell runner for the command docker run hello-world, which returned the following error:
docker: not found
At this point, I feel like I'm out of ideas. Everything points towards Bamboo for some reason not finding Docker on the server, even though I can clearly confirm that it is there. I have tried various different approaches of telling Bamboo where to find Docker, but none of them have worked.
It's obvious that I'm doing something wrong, but I can't figure out what. Or maybe the problem lies in an entirely different direction altogether? Anyway, I would be grateful for any insight shared on this matter.
Okay, I found out what caused this strange behaviour.
The problem was that I installed Docker using sudo snap install docker, and apparently installing docker via snap causes problems with Bamboo.
So I got it to work using these simple steps:
[Server] Uninstalled Snap Docker using sudo snap remove docker
[Server] Reinstalled Docker using sudo apt install docker.io
[Bamboo] Changed the path to Docker in the Server Capabilities to /usr/bin/docker
After that, the hello-world image build succeeded and printed the expected output to the log.
I am trying to configure jenkins slave as docker container, have enabled docker API and connections works fine to the API
Have added the configuration for docker template and docker cloud but it seems that my job does not starts
I can see container getting created on my docker node but the job does not start
Docker cloud configuration image
docker template image
One thing to note is that when i run the container specifically on the docker node and then try to ssh using the same credentials that i am using in jenkins i can ssh into the container.
This message of "Jenkins doesn't have label XXXX" is rather misleading and unhelpful.
You think the problem is something you did wrong in your configuration and when you find out what happen it is nothing to do with jenkins or how you set up the docker plugin.
I run into the same problem than you, and the problem was the docker installation I was using.
The steps I followed to fix it were:
(I was using CENTOS7,jenkins 2.1.38, docker version 1.13.1)
1) Go to the logs of your jenkins (centos logs are /var/log/jenkins.log)
2) Looking into the logs you are going to find out the problem. For instance for me was this:
com.github.dockerjava.api.exception.NotFoundException: {"message":"driver failed programming external connectivity on endpoint happy_heyrovsky (cbfa0d43f8c89d2531323249468503be11e9dd603597a870530d28540c662695): exec: \"docker-proxy\": executable file not found in $PATH"}
As you see the problem is that docker it is not able to find docker-proxy ¿how to fix this?
Go to /usr/libexec/docker and you will see docker-proxy-current. so what you have to do is create a link:
sudo ln -s docker-proxy-current docker-proxy
Tha´s all. After doing this change I execute my build on jenkins and it works.
The goal is to run docker containers on my nanoPI in the same manner as on a ubuntu server machine.
I have recently run into the following error when attempting docker run -it kylemanna/openvpn:
standard_init_linux.go:185: exec user process caused "exec format error"
I also get the same error when executing docker-compose using the container approach
Since I get the problem whether I use docker compose or not, I am starting to think that the error might be my usage of docker on the nanoPI. It may not be supported in the same way.
However, I can execute other containers/images just fine, hello-world, ubuntu, etc.
How do I go about determining the cause of this error? Where is the source code for standard_init_linux.go:185? And, what am I doing incorrectly?
Through trial and error, I discovered that if I rebuilt the openvpn image directly from the github repository on the machine with which the container would be run using (docker build <url>), then this error was resolved for the openvpn container but not (yet) for docker-compose. I imagine rebuilding the docker-compose container will fix the issue with that one too.
This is most likely due to a binary not having been compiled for the machine type that I was using.
Source/Inspiration: https://github.com/moby/moby/issues/23865
I'm trying to check the installation docker pull hello-world
But getting the following error:
Pulling repository hello-world
Get https://index.docker.io/v1/repositories/library/hello-world/images: remote error: access denied
I have CentOS 6.5
Docker version 1.7.1, build 786b29d/1.7.1
I'm in a corporate network but curl https://index.docker.io/v1/repositories/library/hello-world/images forks fine.
What might be the issue?
Thanks in advance!
I got this error while I was trying to pull mongodb image instead of mongo.
So make sure image name is correct. The very same error message happens on both run and pull commands.
Had the same problem & error on the host working via proxy.
In essence - if you are behind an HTTP proxy server, you will need to add proxy configuration in the Docker systemd service file.
https://docs.docker.com/engine/admin/systemd/
(See at "HTTP proxy" section).
This helped me.
Did you add your user in docker group
https://docs.docker.com/engine/installation/linux/centos/#/create-a-docker-group
Otherwise, you should execute docker command with sudo before
docker pull hello-world