Related
I want to iterate over an array of cells, in this case B5:B32, and keep the values that are equal to some reference text in a new array.
However, SPLIT nowadays accepts arrays as inputs. That means that if I use the array notation of "B5:B32" within ARRAYFORMULA or FILTER, it treats it as a range, rather than the array over which we iterate one cell at a time.
Is there a way to ensure that a particular range is the range over which we iterate, rather than the range given at once as an input?
What I considered was using alternative formulations of a cell, using INDEX(ROW(B5), COLUMN(B5)) but ROW and COLUMN also accept array values, so I'm out of ideas on how to proceed.
Example code:
ARRAYFORMULA(
INDEX(
SPLIT(B5:B32, " ", 1), 1
) = "Some text here"
)
Example sheet:
https://docs.google.com/spreadsheets/d/1H8vQqD5DFxIS-d_nBxpuwoRH34WfKIYGP9xKKLvCFkA/edit?usp=sharing
Note: In the example sheet, I can get to my desired answer if I create separate columns containing the results of the SPLIT formula. This way, I first do the desired SPLITS, and then take the values I need from that output by specifying the correct range.
Is there a way to do this without first creating an output and then taking a cell range as an input to FILTER or other similar functions?
For example in cell C35 I've already gotten the desired SPLIT and FILTER done in one go, but I'd still need to find a way to sum up the values of the first character of the second column. Doing this requires that I take the LEFT value of the second column, but for that I need to output the results and continue in a new cell. Is there a way to avoid this?
Ralph, I'm not sure if your sample sheet really reflects what you are trying to end up with, since, for example, I assume you are likely to want the total of the hours per area.
In any case, this formula extracts all of the areas, and the hours worked, and is then easy to do further calculations with.
=ArrayFormula({REGEXEXTRACT({C5:C9;D5:D9;E5:E9;F5:F9;G5:G9;H5:H9},"(.*) \d"),
VALUE(REGEXEXTRACT({C5:C9;D5:D9;E5:E9;F5:F9;G5:G9;H5:H9}," (\d+)hrs"))})
Try that in cell E13, to see the output.
The first REGEXEXTRACT pulls out all the text in front of the first space and number, and the second pulls out all the digits in a string of " #hr" in each cell. These criteria could be modified, if necessary, depending on your actual requirements. Note that it requires the use of VALUE, to convert the hours from text to numeric values, since REGEXEXTRACT produces text (string) results.
It involved concatenating your multiple data columns into one long column of data, to make it simpler to process all the cells in the same way.
This next formula will give you a sum, for whatever matching room/task you type into B6, as an example.
=ArrayFormula(QUERY({REGEXEXTRACT({C5:C9;D5:D9;E5:E9;F5:F9;G5:G9;H5:H9},"(.*) \d"),
VALUE(REGEXEXTRACT({C5:C9;D5:D9;E5:E9;F5:F9;G5:G9;H5:H9}," (\d+)hrs"))},
"select Col1, sum(Col2) where Col1='"&B6&"' group by Col1 label sum(Col2) '' ",0))
I will also answer my own question given what I know from kirkg13's answer and other sources.
Short answer: no, there isn't. If you want to do really convoluted computations with particular cell values, there are a few options and tips:
Script your own functions. You can expand INDEX to accept array inputs and thereby you can select any set of values from an array without outputting it first. Example that doesn't use REGEXMATCH and QUERY to get the SUM of hours in the question's example data set: https://docs.google.com/spreadsheets/d/1NljC-pK_Y4iYwNCWgum8B4NJioyNJKYZ86BsUX6R27Y/edit?usp=sharing.
Use QUERY. This makes your formula more convoluted quite quickly, but is still a readable and universally applicable method of selecting data, for example particular columns. In the question's initial example, QUERY can retrieve only the second column just like an adapted INDEX function would.
Format your input data more effectively. The more easily you can get numbers from your input, the less you have to obfuscate your code with REGEXMATCHES and QUERY's to do computations. Doing a SUM over a RANGE is a lot more compact of a formula than doing a VALUE of a LEFT of a QUERY of an ARRAYFORMULA of a SPLIT of a FILTER. Of course, this will depend on where you get your inputs from and if you have any say in this.
Also, depending on how many queries you will run on a given data set, it may actually be desirable to split up the formula into separate parts and output partial results to keep the code from becoming an amalgamation of 12 different queries and formulas. If the results don't need to be viewed by people, you can always choose to hide specific columns and rows.
Do you have an idea for a function that would sum the amounts from table 2 based on Unique_nr from Table 1?
I tried to do it this way:
=SUM(ARRAYFORMULA(SUMIF(E3:E9,{SPLIT(A3,",")},F3:F9))) <---doesn't work
=SUM(ARRAYFORMULA(SUMIF(E3:E9,{"8-1","9-1"},F3:F9))) <----It works
Theoretically the SPLIT() function gives the same result as I type manually, but unfortunately it doesn't work.
I would like to do this with one function for the entire range of data
https://docs.google.com/spreadsheets/d/1JGvFIZIE6c_D0A2Z4xCWf7pxqVft4Zsb6S-45_d9LY4/edit?usp=sharing
You were almost in the correct way
First of all, remove the double quotes from the cells.
By default SPLIT will Divide text around a specified character or string and it means there will be an extra step in order to use this output to another function, it's possible that your cell had an extra character and the TRIM function will solve it.
=SUM(ARRAYFORMULA(SUMIF(E3:E9,{trim(SPLIT(A3,","))},F3:F9)))
You can use VLOOKUP and SUM as a different approach
As you mentioned SPLIT is a good approach to treat comma-separated cells. In order to avoid unexpected spaces TRIM is a good option (it's optional) as well as IFNA in order to fill that cell in case there's not a match.
=ArrayFormula(SUM(IFNA(vlookup(trim(split(A3,",")),E3:F9,2,0))))
If you can't find a better option, you can use a dragable formula:
=ArrayFormula(SUM($F$3:F*(ISNUMBER(SEARCH($E$3:E,A3)))))
Good Day
I am wondering what custom formula i should use in condition formatting to highlight a cell when it doesn't include a "part name" i have in a list on sheet2
I want Cell A4:A1000 to turn orange when the text in the cell next to it "is not" on a list in Sheet 2 A2:A100
let me know what additional information you need... sorry
Im currently stuck with something like this....:
F4=indirect('Auto Fill'!A2:A343)
but i need it to not be on the list... which is something that's missing from this formula as well... so maybe:
F4= ISNOT indirect('Autofill'!A2:A343)
This is the inverse of your request - I'll leave it as an exercise to the reader how one would get the opposite.
Basically, you want check if the value of some cell is in the list of valid values. If you were computing this as a sheet value, you would use =COUNTIF. For conditional formatting, the same applies:
=COUNTIF({LOOKUP_RANGE_ABS_REF}, {VAL_TO_CHECK})
=COUNTIF($D$2:$D, B2)
Here's the formula in action:
Note that T-3000 and wheels are not in the "Part List" column, and thus do not match.
Comparing to different worksheet within same workbook
If the data to be compared against is not in the same worksheet, the range reference {LOOKUP_RANGE_ABS_REF} must be wrapped in a call to INDIRECT(), i.e.
=COUNTIF(INDIRECT("{OTHER_WORKSHEET_NAME}!{LOOKUP_RANGE_ABS_REF}"), {VAL_TO_CHECK})
=COUNTIF(INDIRECT("some sheet name!$A$2:$A"), B2)
As per official documentation,
Formulas can only reference the same sheet, using standard notation "(='sheetname'!cell)." To reference another sheet in the formula, use the INDIRECT function.
This is also noted in several other SO questions (albeit using different core formulas besides COUNTIF):
https://stackoverflow.com/a/25753889
https://stackoverflow.com/a/28910087
https://stackoverflow.com/a/36684815
https://stackoverflow.com/a/37634170
(I'm sure there are more.)
Missing from those answers is the caveat that the indirection you've just added is not robust to changes to the value of {OTHER_WORKSHEET_NAME}, e.g. you (or some other editor) changed the actual name of the worksheet.
Unlike traditional entered-on-the-worksheet formulas, there is no "run-time" reference link that will update the static text value you had to enter when you created the Conditional Format rule. This lack of reference-updating is actually one of the useful features of INDIRECT(), so don't expect it to ever change.
Furhtermore, the reference break will not be immediately evident. Any items that were added to your formatted range after the name change had their format computed using the broken reference, but any items added before the name changed will keep their current format. Only when the actual range that is wrapped by INDIRECT is edited will any pre-existing conditional formats be recomputed. Thus, you may not notice that the sheet was renamed until you add a new valid part to the list.
Quick kludge, import what you need (I gave it the name List) from sheet2 (you'll have to grant permission), Select ColumnA and apply a CF formula rule of:
=and(A1<>"",iserror(match(B1,IMPORTRANGE(" k e y ","List"),0)))
I need tu sum several cells that are separated one from another, these cells are
C3,F3,I3,L3,O3,R3,U3,X3,AA3,AD3,AG3,AJ3,AM3,AP3,AS3,AV3,AY3,BB3,BE3,BH3,BK3,BN3,BQ3,BT3,BW3,BZ3,CC3,CF3,CI3,CL3,CO3
if this other cells $C$1,$F$1,$I$1,$L$1,$O$1,$R$1,$U$1,$X$1,$AA$1,$AD$1,$AG$1,$AJ$1,$AM$1,$AP$1,$AS$1,$AV$1,$AY$1,$BB$1,$BE$1,$BH$1,$BK$1,$BN$1,$BQ$1,$BT$1,$BW$1,$BZ$1,$CC$1,$CF$1,$CI$1,$CL$1,$CO$1
that are on the same column but different row are >= to certain number given and <= to other given number, but it returns #Value, can somebody help me find out what am I doing wrong?
This is the function i am writing:
=SUMIFS((C3,F3,I3,L3,O3,R3,U3,X3,AA3,AD3,AG3,AJ3,AM3,AP3,AS3,AV3,AY3,BB3,BE3,BH3,BK3,BN3,BQ3,BT3,BW3,BZ3,CC3,CF3,CI3,CL3,CO3),($C$1,$F$1,$I$1,$L$1,$O$1,$R$1,$U$1,$X$1,$AA$1,$AD$1,$AG$1,$AJ$1,$AM$1,$AP$1,$AS$1,$AV$1,$AY$1,$BB$1,$BE$1,$BH$1,$BK$1,$BN$1,$BQ$1,$BT$1,$BW$1,$BZ$1,$CC$1,$CF$1,$CI$1,$CL$1,$CO$1),">="&B55,($C$1,$F$1,$I$1,$L$1,$O$1,$R$1,$U$1,$X$1,$AA$1,$AD$1,$AG$1,$AJ$1,$AM$1,$AP$1,$AS$1,$AV$1,$AY$1,$BB$1,$BE$1,$BH$1,$BK$1,$BN$1,$BQ$1,$BT$1,$BW$1,$BZ$1,$CC$1,$CF$1,$CI$1,$CL$1,$CO$1),"<="&C55)
I'm not 100% certain, but it looks like the problem here is that SUMIFS requires arguments to be expressed in continuous-range form, e.g. A3:CO3. It looks like you're trying to work with every third column in the dataset, yes? As far as I can tell, this is best (only?) done as an array function, so that you can tell it to filter on "every third column."
Enter this in the cell, then press CTRL+SHIFT+Enter (CSE) to evaluate it as an array function:
=SUM(($A$1:$CO$1>=B55)*($A$1:$CO$1<=C55)*(MOD(COLUMN(A3:CO3),3)=0)*(A3:CO3))
You'll also need to hit CSE every time you evaluate or change it. There's a decent tutorial for array functions at https://support.office.com/en-za/article/Guidelines-and-examples-of-array-formulas-7d94a64e-3ff3-4686-9372-ecfd5caa57c7, which may help if you're unfamiliar with them.
In Google Docs Spreadsheets, one can use Range Names to put labels on ranges of cells to make formulas more legible. In most formulas, one can use the range C:C to denote the entire C column, and C2:C to denote the entire C column after and including C2.
Is there a way to create range names of the same nature? When I try C:C or C2:C or Sheet!C:C or 'Sheet'!C:C I always get the error "The range you specified is not in a valid range format." I would like the range name to expand as my form adds rows to my spreadsheet. Thanks.
I just discovered the if you use the '-' operator, it starts from the bottom row. So,
=INDIRECT("-D:D12")
starts from the last row and works it's way up to D12!
I had a similar problem. Although I do not know how to do exactly what you are asking, you can do essentially the same thing by referencing cells that are not yet created.
For example:
Column C currently has 100 cells (100 rows in the sheet)
Instead of referencing it with C:C, use C1:C999
If you make the row reference high enough, then you can account for future rows that you will create. Hope it helps.
I don't think so... even if you select a column manually while in the Range Name selector, it complains. That would be a nice feature and it would make sense since they support column ranges for formulas already.
I believe this does work now. I have a range name of "Sheet1!A10:AW10" with no problems.
If you try to do a whole column, I think it will just take all the available cells in the column at that time. i.e. if you make more cells later, you need to manually add to the range name.
I had the same problem with ranges such as A3:A which normally work in other places such as ARRAYFORMULA(), but the workaround is to not specify the starting row, such as A:A. In cases when this would be a problem, you can proxy the data through another column using something like ARRAYFORUMULA(A25:A) as the formula.
Update: Apparently I haven't read the question properly. I see that the OP had tried leaving out the row number, so perhaps it wasn't working at that time, but it does now. The notations still don't work.
Update2: I didn't notice that google spreadsheet replaces ranges like A:A to A1:A50, so new rows added later on do not still get included. That I think is what #Dean is trying to say in his answer.
I think it's a helpful tool to use Insert -> Define new range to make a wizard appear and make the syntax correct. Hehe
My response in other topic