Currently my workflow is using jenkins with multibranch-pipeline (declarative pipeline/jenkinsfile) to checkout from SVN, build, test with sonarqube and deploy to a weblogic server, it's working fine with all the branches needed.
Jenkins is configured to use active directory/ldap to enable all my colleagues to login with their credentials
I just don't know how to get all the emails from the users who did commit since the last build, as i want to send them an email (go and fix <3)
I'm kinda new to jenkins and i'm findind difficult to find some good documentation, thanks in advance for any help!
Figured it out
With active directory enabled, jenkins already knows everything i need and i can just use this code inside the post{} section of the declarative pipeline
failure {
script {
def emails= []
emails << emailextrecipients([[$class: 'CulpritsRecipientProvider']])
emails = emails.join(',')
emailext to: emails, subject:"JENKINS - ${currentBuild.fullDisplayName} - ${currentBuild.currentResult}", body: "Check out what you have done, jenkins is crying!!!"
}
}
Related
We have several jenkins pipeline jobs setup as "pipeline from scm" that checkout a jenkins file from github and runs it. There is sufficient try/catch based error handling inside the jenkinsfile to trap error conditions and notify the right channels.This blog post goes into a quite a bit of depth about how to achieve this.
However, if there is issue fetching the jenkinsfile in the first place, the job fails silently. How does one generate notifications from general job launch failures before the pipeline is even started?
Jenkins SCM pipeline doesn't have any execution provision similar to catch/finally that will be called if Jenkinsfile load is failed, And I don't think there will be any in future.
However there is this global-post-script which runs groovy script after every build of every job on Jenkins. You have to place that script in $JENKINS_HOME/global-post-script/ directory.
Using this you can send notifications or email to admins based on project that failed and/or reason/exceptions of failure.
Sample code that you can put in script
if ("$BUILD_RESULT" != 'SUCCESS') {
def job = hudson.model.Hudson.instance.getItem("$JOB_NAME")
def build = job.getBuild("$BUILD_NUMBER")
def exceptionsToHandle = ["java.io.FileNotFoundException","hudson.plugins.git.GitException"]
def foundExection = build
.getLog()
.split('\n')
.toList()
.stream()
.filter{ line ->
!line.trim().isEmpty() && !exceptionsToHandle.stream().filter{ex -> line.contains(ex)}.collect().isEmpty()
}
.collect()
.size() > 0;
println "do something with '$foundExection'"
}
You can validate your Jenkinsfile before pushing it to repository.
Command-line Pipeline Linter
There are some IDE Integrations as well
Apparently this is an open issue with Jenkins: https://issues.jenkins.io/browse/JENKINS-57946
I have decided not to use Yogesh answer mentioned earlier. For me it is simpler to just copy the content of the Jenkinsfile directly into the Jenkins project instead of pointing Jenkins to the GIT location of the Jenkinsfile. However, in addition I keep the Jenkinsfile in GIT. But make sure to keep the GIT and the Jenkins version identical.
We want to use Jenkins to generate releases/deployments on specific project milestones. Is it possible to trigger a Jenkins Pipeline (defined in a Jenkinsfile or Groovy script) when a tag is pushed to a Git repository?
We host a private Gitlab server, so Github solutions are not applicable to our case.
This is currently something that is sorely lacking in the pipeline / multibranch workflow. See a ticket around this here: https://issues.jenkins-ci.org/browse/JENKINS-34395
If you're not opposed to using release branches instead of tags, you might find that to be easier. For example, if you decided that all branches that start with release- are to be treated as "release branches", you can go...
if( env.BRANCH_NAME.startsWith("release-") ) {
// groovy code on release goes here
}
And if you need to use the name that comes after release-, such as release-10.1 turning into 10.1, just create a variable like so...
if( env.BRANCH_NAME.startsWith("release-") ) {
def releaseName = env.BRANCH_NAME.drop(8)
}
Both of these will probably require some method whitelisting in order to be functional.
I had the same desire and rolled my own, maybe not pretty but it worked...
In your pipeline job, mark that "This project is parameterized" and add a parameter for your tag. Then in the pipeline script checkout the tag if it is present.
Create a freestyle job that runs a script to:
Checkout
Run git describe --tags --abbrev=0 to get the latest tag.
Check that tag against a running list of builds (like in a file).
If the build hasn't occurred, trigger the pipeline job via a url passing your tag as a parameter (in your pipeline job under "Build Triggers" set "Trigger builds remotely (e.g. from scripts) and it will show the correct url.
Add the tag to your running list of builds so it doesn't get triggered again.
Have this job run frequently.
if you use multibranch pipeline, there is a discover tag. Use that plus Spencer solution
I tried search but didn't find any example. I tried https://jenkins.io/doc/pipeline/examples/#trigger-job-on-all-nodes and got it is for the different nodes on the same Jenkins.
I would like to trigger a build on another Jenkins. I configured the Remote Hosts and Authentication in system configuration of my Jenkins.
How to call "Parameterized Remote Trigger Plugin" in Jenkins Pipeline script?
Seems to be an open bug: https://issues.jenkins-ci.org/browse/JENKINS-38657
As a workaround you could create another job locally of an old type and use the plugin in the old school non pipeline script way. Then in your pipeline script you would just trigger this job. I know it's an ugly adapter but then you have parametrize this adapter and have it up and running for almost anything ;)
EDIT:
The bug 38657 is already closed, the plugin is available as pipeline step since 16th of May 2018. Usage should be as easy as:
//Trigger remote job
def handle = triggerRemoteJob(remoteJenkinsName: 'remoteJenkins', job: 'RemoteJob')
More information on the triggerRemoteJob step
For anyone wondering how to do this using the Declarative Jenkinsfile Syntax:
steps {
triggerRemoteJob remoteJenkinsName: 'configured-remote-jenkins-name', job: 'trigger-job-folder/trigger-job-name', blockBuildUntilComplete: true
}
I have GitLab Community Edition 8.15.2 successfully trigger pipeline projects in Jenkins 2.32.1 using a webhook. I want the gitlab push to trigger a build with parameters but the parameter value is null when it comes through so the build fails.
The gitlab webhook looks like:
http://jenkins.server:8080/project/project-a/buildWithParameters?MYPARAM=foo
In my pipeline project I echo the parameter value out with
echo "MYPARAM: ${MYPARAM}"
and it's not set to anything. Any ideas on where I've gone wrong?
UPDATE
The actual code I'm using in the pipeline is:
node {
try {
echo "VM_HOST: ${VM_HOST}"
echo "VM_NAME: ${VM_NAME}"
stage('checkout') {
deleteDir()
git 'http://git-server/project/automated-build.git'
}
stage('build') {
bat 'powershell -nologo -file Remove-MyVM.ps1 -VMHostName %VM_HOST% -VMName "%VM_NAME%" -Verbose'
}
...
}
}
The parameter VM_HOST has a default value but VM_NAME doesn't. In my Console output in Jenkins I can see:
[Pipeline] echo
VM_HOST: HyperVHost
[Pipeline] echo
VM_NAME:
I have been struggling with this for weeks. I had it working once, but I couldn't get it to work again, untill today. And the solution was mindblowingly obvious ofcourse...
Automatically for each pipeline job I ticked the following box:
Build when a change is pushed to GitLab. GitLab CI Service URL:
http://jenkins.dev:8080/project/MyProject
Then from GitLab I used the webhook to trigger the above.
Like you I tried to add /buildWithParameters and tried many other things that didn't work.
The problem was, I ticked the wrong checkbox!
Since I trigger the build from a GitLab webhook, the above checkbox (build when a...) does not have to be checked at all.
What needs to be checked is:
Trigger builds remotely (e.g., from scripts)
That checkbox provides you with a new URL:
Use the following URL to trigger build remotely:
JENKINS_URL/job/MyProject/build?token=TOKEN_NAME or
/buildWithParameters?token=TOKEN_NAME
Like all the documentation I came along states and as you can see, the URL now no longer starts with /project, but with /job instead!
So tick that box and change your URL accordingly:
http://jenkins.server:8080/**job**/project-a/buildWithParameters?token=TOKEN_NAME&MYPARAM=foo
Least I want to mention the token:
In the GitLab webhook there is a seperate field for "token", which states:
Use this token to validate received payloads. It will be sent with the request in the X-Gitlab-Token HTTP header.
So, the token provided there will be sent along the request as a HTTP header.
This is the token which can be provided globally in the Jenkins setup.
The token you must provide in the Jenkins job when ticking the box Use the following URL to trigger build remotely must be send in the URL as GET parameter, just like the example shows.
Final note: personally I have never got this working completely, because I don't get the Jenkins CSRF protection off my back. Disabling it gives me another error. However, hopefully the above does fix the problem for you and others.
GitLab plugin does not allow you to pass arbitrary parameters. In their project there is an open issue for it that deserves to be upvoted.
My convoluted solution was to use the desired values for the push trigger as the default parameters of the job. Then I used the Parameterized Scheduler plugin to use other values in the scheduled executions.
The problem is that I got a bad usability for the job when it was manually run, since the default parameters were appropriate for the push hook.
I found the solution here https://www.jittagornp.me/blog/jenkins-gitlab-webhook/
I verified it with Jenkins 2.263.1 and GitLab Community Edition 13.6.1
Your webhook url will look like
https://hunter:11a403302a4f01b9b4975c0ac27441a5cc#jenkinsservername.com/job/yourjenkinsproject/buildWithParameters?token=Aju9ryHUu6t7W8wLSeCWtY2bWjzQduYNPyY7B3gs&yourparam=yourvalue
"hunter" ist your username in Jenkins.
The following is the Jenkins API Token you have to create in your Jenkins User Managment independent of the project.
The last Token is the one you specify in the jenkins project options under "Trigger builds remotely (e.g., from scripts)"
The last thing is to add your Parameter and value to the url with ¶m=value
This blog post describes very well how to setup notifications for failed jobs within the Pipeline DSL.
Unfortunately, this approach has a severe drawback: There is no (email) notification at all if the SCM is not reachable because Jenkins is not able to checkout the Jenkinsfile. Does anyone know a solution or workaround for that so that I get notified if a Pipeline Job fails because of SCM issues while checking out the Jenkinsfile (or also in case of syntax errors within the Jenkinsfile)?
If you have the Email-ext plugin installed you can call it from your pipeline script.
You can use the snippet generator that comes with pipeline plugin (available at $JENKINS_URL/pipeline-syntax).
Select the plugin and configure it as you would used to do in a post build step.
Put the generated snippet in your pipeline. You might want to wrap it in a try {..} finally {..}
emailext attachLog: true,
body: 'Oops',
recipientProviders: [[ $class: 'DevelopersRecipientProvider']],
subject: 'Failing tests', to: 'someone#example.com'
The beuaty about this pipeline-syntax is that it will dynamically add the plugins you install (so if you used to use a different notification plugin, it should show up here).
You can also take a look at this documentation where they give some examples as well.
This is a similar question