when i build libffi on a SDK forwarded by linkit smart 7688,the error comes out,and i couldnt find any help by search.
libattr/attr_copy_fd.c:25:24: fatal error: sys/xattr.h: No such file or directory
Config-build.in:12603:warning: defaults for choice values not supported
Config-build.in:12619:warning: defaults for choice values not supported
Config-build.in:14019:warning: defaults for choice values not supported
Config-build.in:14499:warning: defaults for choice values not supported
warning: (boost-libs-all) selects boost-coroutine2 which has unmet direct dependencies (PACKAGE_boost && !GCC_VERSION_4_8)
warning: (boost-libs-all) selects boost-coroutine2 which has unmet direct dependencies (PACKAGE_boost && !GCC_VERSION_4_8)
\#
\# configuration written to .config
\#
make[1]: Entering directory '/home/color/mt7688'
make[2]: Entering directory '/home/color/mt7688/feeds/packages/libs/glib2'
make[2]: Leaving directory '/home/color/mt7688/feeds/packages/libs/glib2'
make[1]: Leaving directory '/home/color/mt7688'
Config-build.in:12603:warning: defaults for choice values not supported
Config-build.in:12619:warning: defaults for choice values not supported
Config-build.in:14019:warning: defaults for choice values not supported
Config-build.in:14499:warning: defaults for choice values not supported
warning: (boost-libs-all) selects boost-coroutine2 which has unmet direct dependencies (PACKAGE_boost && !GCC_VERSION_4_8)
warning: (boost-libs-all) selects boost-coroutine2 which has unmet direct dependencies (PACKAGE_boost && !GCC_VERSION_4_8)
\#
\# configuration written to .config
\#
make[1]: Entering directory '/home/color/mt7688'
make[2]: Entering directory '/home/color/mt7688/feeds/packages/utils/attr'
CFLAGS="-Os -pipe -mno-branch-likely -mips32r2 -mtune=24kec -mdsp -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -msoft-float -I/home/color/mt7688/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/usr/include -I/home/color/mt7688/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/include -I/home/color/mt7688/staging_dir/toolchain-mipsel_24kec+dsp_gcc-4.8-linaro_uClibc-0.9.33.2/usr/include -I/home/color/mt7688/staging_dir/toolchain-mipsel_24kec+dsp_gcc-4.8-linaro_uClibc-0.9.33.2/include " CXXFLAGS="-Os -pipe -mno-branch-likely -mips32r2 -mtune=24kec -mdsp -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -msoft-float -I/home/color/mt7688/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/usr/include -I/home/color/mt7688/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/include -I/home/color/mt7688/staging_dir/toolchain-mipsel_24kec+dsp_gcc-4.8-linaro_uClibc-0.9.33.2/usr/include -I/home/color/mt7688/staging_dir/toolchain-mipsel_24kec+dsp_gcc-4.8-linaro_uClibc-0.9.33.2/include " LDFLAGS="-L/home/color/mt7688/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/usr/lib -L/home/color/mt7688/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/lib -L/home/color/mt7688/staging_dir/toolchain-mipsel_24kec+dsp_gcc-4.8-linaro_uClibc-0.9.33.2/usr/lib -L/home/color/mt7688/staging_dir/toolchain-mipsel_24kec+dsp_gcc-4.8-linaro_uClibc-0.9.33.2/lib " make -j1 -C /home/color/mt7688/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/attr-20170915/. AR="mipsel-openwrt-linux-uclibc-gcc-ar" AS="ccache_cc -c -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kec -mdsp -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -msoft-float" LD=mipsel-openwrt-linux-uclibc-ld NM="mipsel-openwrt-linux-uclibc-gcc-nm" CC="ccache_cc" GCC="ccache_cc" CXX="ccache_cxx" RANLIB="mipsel-openwrt-linux-uclibc-gcc-ranlib" STRIP=mipsel-openwrt-linux-uclibc-strip OBJCOPY=mipsel-openwrt-linux-uclibc-objcopy OBJDUMP=mipsel-openwrt-linux-uclibc-objdump SIZE=mipsel-openwrt-linux-uclibc-size CROSS="mipsel-openwrt-linux-uclibc-" ARCH="mipsel" ;
make[3]: Entering directory '/home/color/mt7688/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/attr-20170915'
CC libattr/libattr_la-attr_copy_fd.lo
****libattr/attr_copy_fd.c:25:24: fatal error: sys/xattr.h: No such file or directory
\# include <sys/xattr.h>
\^****
compilation terminated.
Makefile:929: recipe for target 'libattr/libattr_la-attr_copy_fd.lo' failed
make[3]: * [libattr/libattr_la-attr_copy_fd.lo] Error 1
make[3]: Leaving directory '/home/color/mt7688/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/attr-20170915'
Makefile:93: recipe for target '/home/color/mt7688/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/attr-20170915/.built' failed
make[2]: * [/home/color/mt7688/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/attr-20170915/.built] Error 2
make[2]: Leaving directory '/home/color/mt7688/feeds/packages/utils/attr'
package/Makefile:191: recipe for target 'package/feeds/packages/attr/compile' failed
make[1]: * [package/feeds/packages/attr/compile] Error 2
make[1]: Leaving directory '/home/color/mt7688'
/home/color/mt7688/include/toplevel.mk:174: recipe for target 'package/feeds/packages/glib2/compile' failed
make: * [package/feeds/packages/glib2/compile] Error 2
It seems the library you are looking for is not included in OpenWrt SDK by default.
Being this way you should look for it and add it manually. In my case I have the libraries inside the folder $ROOT_DIR/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/include, so you should find and add mannualy xattr.h and move it to $ROOT_DIR/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/include/sys.
Related
If activating Lua-Support in modules.conf, ./configure, make , install yields the following error:
*
making install mod_lua
make[4]: Entering directory '/home/jklou/jkl/fs/freeswitch-1.8.2/src/mod/languages/mod_lua'
CXX mod_lua_la-mod_lua.lo
mod_lua.cpp:37:17: fatal error: lua.h: 没有那个文件或目录
compilation terminated.
Makefile:687: recipe for target 'mod_lua_la-mod_lua.lo' failed
make[4]: *** [mod_lua_la-mod_lua.lo] Error 1
make[4]: Leaving directory '/home/jklou/jkl/fs/freeswitch-1.8.2/src/mod/languages/mod_lua'
Makefile:679: recipe for target 'mod_lua-install' failed
make[3]: *** [mod_lua-install] Error 1
make[3]: Leaving directory '/home/jklou/jkl/fs/freeswitch-1.8.2/src/mod'
Makefile:587: recipe for target 'install-recursive' failed
make[2]: *** [install-recursive] Error 1
make[2]: Leaving directory '/home/jklou/jkl/fs/freeswitch-1.8.2/src'
Makefile:3257: recipe for target 'install-recursive' failed
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory '/home/jklou/jkl/fs/freeswitch-1.8.2'
Makefile:3729: recipe for target 'install' failed
make: *** [install] Error 2
*
so Lua cannot be used.
Google: Several Forums advise to refresh the GIT-repository, but this cannot be used because I need an older Version of freeswitch
I've found a solution:
apt-get install libreadline-dev apt-get install lua5.2 lua5.2-doc liblua5.2-dev
then copy LUA-sh-files to LUA-mod-directory of Freeswitch:
cp /usr/include/lua5.2/*.h [Installationsverzeichnis Freeswitch]]/src/mod/languages/mod_lua/
then link it:
sudo ln -s /usr/lib/x86_64-linux-gnu/liblua5.2.so /usr/lib/x86_64-linux-gnu/liblua.so
then repeat make install (don't repeat ./configure and make)
sudo make install
this worked perfectly for me (Freeswitch 1.8.2. and Ubuntu 18.04 LTS running in Virtual Box)
I am using a foreach in a makefile for a particular target.
my_Target:
$(foreach x,$(MY_TARGET_DIRS), #echo " BUILD $(x)";$(Q)$(MAKE) --directory=$(x) LIB_DIR=$(MY_LIB_DIR) $(MY_TARGET_RULES); )
This is intended call the makefiles contained every specified directory of MY_TARGET_DIRS, after a string has been printed to tell which build is ongoing.
The Q variable is defined as follows:
# Silent per default, 'make V=1' shows all compiler calls.
ifneq ($(V),1)
Q := #
endif
So that the make command is verbose if V=1 is defined.
For V=1 the output log is:
make my_Target V=1
BUILD /dir1
make[1]: Entering directory `/dir1'
make[1]: Nothing to be done for `elf'.
make[1]: Nothing to be done for `bin'.
make[1]: Leaving directory `/dir1'
/bin/sh: #echo: command not found
make[1]: Entering directory `/dir2'
make[1]: Nothing to be done for `elf'.
make[1]: Nothing to be done for `bin'.
make[1]: Leaving directory `/dir2'
While if I do not define V=1, the output log is:
make my_Target
BUILD /dir1
/bin/sh: #make: command not found
/bin/sh: #echo: command not found
/bin/sh: #make: command not found
make: *** [my_Target] Error 127
How can I get the behavior I desire correctly?
Bye!
Put the # ($(Q)) at the beginning of the recipe:
my_Target:
$(Q)$(foreach x,$(MY_TARGET_DIRS), echo " BUILD $(x)";$(MAKE) --directory=$(x) LIB_DIR=$(MY_LIB_DIR) $(MY_TARGET_RULES); )
Notice that the foreach will ouptut a single recipe line, and the # will apply to all of it. An alternative, if you want to get more fancy is to create a rule for each of the target dirs:
MY_TARGET_DIRS_TARGS=$(MY_TARGET_DIRS:%=%/.phony)
my_Target: $(MY_TARGET_DIRS_TARG)
$(MY_TARGET_DIRS_TARGS):
#echo " BUILD $(x)"
$(Q)(MAKE) --directory=$(x) LIB_DIR=$(MY_LIB_DIR) $(MY_TARGET_RULES);
.PHONY: $(MY_TARGET_DIRS_TARGS)
I have downloaded OpenWRT source from git and build it. I created a simple helloworld package with the required Makefile in package/helloworld directory and build it. But it does not seem to be doing anything. Following is the log:
sonal#sonal-ThinkPad:~/openwrt$ make V=99 package/helloworld/compile
WARNING: your configuration is out of sync. Please run make menuconfig, oldconfig or defconfig!
make[1]: Entering directory '/home/sonal/openwrt'
make[2]: Entering directory '/home/sonal/openwrt/package/libs/toolchain'
if [ -f /home/sonal/openwrt/staging_dir/target-mips_34kc_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean ]; then rm -f /home/sonal/openwrt/staging_dir/target-mips_34kc_uClibc-0.9.33.2/pkginfo/toolchain.default.install /home/sonal/openwrt/staging_dir/target-mips_34kc_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean; fi; echo "libc" >> /home/sonal/openwrt/staging_dir/target-mips_34kc_uClibc-0.9.33.2/pkginfo/toolchain.default.install
if [ -f /home/sonal/openwrt/staging_dir/target-mips_34kc_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean ]; then rm -f /home/sonal/openwrt/staging_dir/target-mips_34kc_uClibc-0.9.33.2/pkginfo/toolchain.default.install /home/sonal/openwrt/staging_dir/target-mips_34kc_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean; fi; echo "libgcc" >> /home/sonal/openwrt/staging_dir/target-mips_34kc_uClibc-0.9.33.2/pkginfo/toolchain.default.install
make[2]: Leaving directory '/home/sonal/openwrt/package/libs/toolchain'
make[2]: Entering directory '/home/sonal/openwrt/package/helloworld'
make[2]: Leaving directory '/home/sonal/openwrt/package/helloworld'
make[1]: Leaving directory '/home/sonal/openwrt'`enter code here`
Thanks
Sonal
http://wiki.prplfoundation.org/wiki/Creating_an_OpenWrt_package_for_a_web_page
This above link will guide you how to build own package. I had also made own luci pages with above link. It will guide you from scratch.
If you want to create only hello world page then no need to create package, you just make new directory name as files in '/home/sonal/openwrt/'
and then go to files directory and make new directory as www in '/home/sonal/openwrt/files/'. No custom packages requires for it.
Good day!, I hope someone has the answer to this question. I'm having troubles when trying to "convert" an html to pdf from a rails application, I've followed these steps: http://www.snikt.net/blog/2012/04/26/wicked-pdf/ with no luck, when I click the link it only changes the url from "http://localhost:3000/users/3" to "http://localhost:3000/users.3" with a blank page.
Then I read that you must configure a few things first, so I follow these steps: http://code.google.com/p/wkhtmltopdf/wiki/compilation, everything looks good until I reach the part with the "make && make install", here are the results:
cd src/lib/ && make -f Makefile
make[1]: Entering directory /home/username/wkhtmltopdf/src/lib'
make[1]: Nothing to be done forfirst'.
make[1]: Leaving directory /home/username/wkhtmltopdf/src/lib'
cd src/pdf/ && make -f Makefile
make[1]: Entering directory/home/username/wkhtmltopdf/src/pdf'
make[1]: Nothing to be done for first'.
make[1]: Leaving directory/home/username/wkhtmltopdf/src/pdf'
cd src/image/ && make -f Makefile
make[1]: Entering directory /home/username/wkhtmltopdf/src/image'
make[1]: Nothing to be done forfirst'.
make[1]: Leaving directory /home/username/wkhtmltopdf/src/image'
cd src/lib/ && make -f Makefile install
make[1]: Entering directory/home/username/wkhtmltopdf/src/lib'
mkdir: cannot create directory /include': Permission denied
make[1]: *** [install_headers] Error 1
make[1]: Leaving directory/home/username/wkhtmltopdf/src/lib'
make: * [sub-src-lib-install_subtargets-ordered] Error 2
As a note the command "wkhtmltopdf some_url my_pdf.pdf" does work, the issue is when trying to "convert" an html, from a rails application, to pdf.
I appreciate every single tip you can give because I'm trully lost. I'm sorry if it's a dumb question and for all the troubles, and thank you for your time.
Ok, just go through all of that, following this tutorial: http://blog.tcs.de/install-wkhtmltopdf-on-ubuntu-server/
Thank you guys for your time.
I am trying to cross-compile Erlang and running into a weird bug. The commands used are
make clean
./otp_build configure --host=arm-none-linux-gnueabi --build=i686-pc-linux-gnu
--prefix=/opt/erlang erl_xcomp_sysroot=~/sbctools/arm-2007q3 --disable-hipe
--disable-threads --disable-smp --disable-megaco-flex-scanner-lineno
--disable-megaco-reentrant-flex-scanner --disable-dynamic-ssl-lib
--without-termcap --without-javac --without-ssl
./otp_build boot
Their output can be seen at http://gist.github.com/576199 (it's too big to paste here), but the error which ends the process is
/home/aromanov/sbctools/arm-2007q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.1/../../../../arm-none-linux-gnueabi/bin/ld: /home/aromanov/otp_src/erts/emulator/zlib/obj/arm-none-linux-gnueabi/opt/libz.a(adler32.o): Relocations in generic ELF (EM: 3)
/home/aromanov/sbctools/arm-2007q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.1/../../../../arm-none-linux-gnueabi/bin/ld: /home/aromanov/otp_src/erts/emulator/zlib/obj/arm-none-linux-gnueabi/opt/libz.a(adler32.o): Relocations in generic ELF (EM: 3)
/home/aromanov/sbctools/arm-2007q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.1/../../../../arm-none-linux-gnueabi/bin/ld: /home/aromanov/otp_src/erts/emulator/zlib/obj/arm-none-linux-gnueabi/opt/libz.a(adler32.o): Relocations in generic ELF (EM: 3)
/home/aromanov/sbctools/arm-2007q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.1/../../../../arm-none-linux-gnueabi/bin/ld: /home/aromanov/otp_src/erts/emulator/zlib/obj/arm-none-linux-gnueabi/opt/libz.a(adler32.o): Relocations in generic ELF (EM: 3)
/home/aromanov/sbctools/arm-2007q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.1/../../../../arm-none-linux-gnueabi/bin/ld: /home/aromanov/otp_src/erts/emulator/zlib/obj/arm-none-linux-gnueabi/opt/libz.a(adler32.o): Relocations in generic ELF (EM: 3)
/home/aromanov/otp_src/erts/emulator/zlib/obj/arm-none-linux-gnueabi/opt/libz.a: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [/home/aromanov/otp_src/bin/arm-none-linux-gnueabi/beam] Error 1
make[3]: Leaving directory `/home/aromanov/otp_src/erts/emulator'
make[2]: *** [opt] Error 2
make[2]: Leaving directory `/home/aromanov/otp_src/erts/emulator'
make[1]: *** [opt] Error 2
make[1]: Leaving directory `/home/aromanov/otp_src/erts'
make: *** [emulator] Error 2
Indeed, viewing ~/otp_src/erts/emulator/zlib/obj/arm-none-linux-gnueabi/opt/libz.a shows it's compiled for Intel 30386. But why? And how can I avoid it?
EDIT: ~/sbctools/arm-2007q3/bin is the first directory in the PATH. Do I perhaps need to add other toolchain directories as well?
make[4]: Entering directory /home/aromanov/otp_src/erts/emulator/zlib'
make -f arm-none-linux-gnueabi/Makefile TYPE=opt
make[5]: Entering directory/home/aromanov/otp_src/erts/emulator/zlib'
make[5]: Nothing to be done for all'.
make[5]: Leaving directory/home/aromanov/otp_src/erts/emulator/zlib'
make[4]: Leaving directory `/home/aromanov/otp_src/erts/emulator/zlib'
Looks like you've built zlib part before... when it was not correctly configured.
Try make clean or make distclean and then recompile.