I am using portainer to run my docker images that I build on a github action.
I've setup the docker in swarm mode, so when a new images is build the container would be recreated automatically.
Everything works just fine so far, my only problem is, how do I run the database migrations?
I want to run the database migrations command after the new container was created and I cannot figure it out how I could do this.
I know I could create a script an use it as entrypoint, but I read that it's not ok to run the migration command that way.
I am not using docker-compose file, and I would like to avoid using it, it's easier for me to run the containers like this
There is any solution I should look into?
May be RUN will help you?
"The RUN instruction will execute any commands in a new layer on top of the current image and commit the results. The resulting committed image will be used for the next step in the Dockerfile.
Layering RUN instructions and generating commits conforms to the core concepts of Docker where commits are cheap and containers can be created from any point in an image’s history, much like source control."
I have docker stack started with docker stack deploy --compose-file ...
and later manually edited via Docker Portainer UI.
I'd like to write a script that updates the docker image tag of one of the services.
To do that I need to "download" the latest "docker-compose" stack definition however I cannot find the appropriate docker command.
I do know that the best would be to stop changing stack manually and rely on its definition stored in git but unfortunately, it is not up to me.
Please point me to the appropriate docker command or confirm that it is not available.
As far as i know there is no command you could get the compose file from the running container directly. At least not implemented out of the box in docker. You could try to parse all the relevant information from docker inspect and few other commands to list/inspect all relevant objects?.
I have once came across the similar situation where we had a running container but no run/compose command which we needed to update. At the time (roughly a year ago) i found and used docker-autocompose which did very good job. We only had to manually verify and adjust few things,but it got all the difficult parts with run parameters done for us.
It could help in your case to automate it if your compose configs are simple enough.
But if you wanted to fully automate it to mimic CD, then i would not recommend the approach above. In that case i would check if you could use portainer api as #LinFelix recommended. Or store compose files somewhere - prepared with parameters ($IMAGE_TAG) (git/on server) so you can then generate temporary compose files with all configuration and then remove the current one.
I'm new to docker and have been dabbling with it for the past few days. I've managed to successfully use docker-compose for a multi-container deployment involving an app server (flask + gunicorn) and web server (nginx).
Now, I'd like to recreate the deployment on an offline machine. After doing research, it seems that most have mentioned use docker save and docker load to transfer over the base images. However, I'm wondering whether its possible to recreate the deployment from the image created by docker-compose build? Reason being I would like to skip the entire process of wheeling my python package dependencies for offline use, which I would have to do for the method starting from the base images.
I've tried to save that particular image (output of docker-compose build) and load it on the offline machine, and then tried docker run and docker-compose up but both don't seem to work. Would like to check with the community whether this method is even possible, and if so what's the right way to go about it?
Thanks!
To solve my issue, I ended up making an image of each individual container post pip install, then using docker-compose.yml simply to spin them up. As David mentioned, it doesn't seem possible to spin up the container from the single image output by docker-compose build.
I have made a quite simple golang server and I need to deploy it to a digitalocean droplet.
I know that there can be issues with cross-building go apps in case they use cgo, so to not to think about it in future I decided to use docker, so my app will be build and run always in same environment.
The first thing I dont get is about developing an app. When I create a Dockerfile I use commands to add files from my project directory into newly created docker image. Then I run the container created from this image. But what if I edit my code? - as I understood I must stop the container, remove an image and then build it again. This is a bit tricky for such a common situation - or am I doing things wrong?
Second one - I have created a docker droplet on a DO: Whats the way to deploy my app?
I have to push my image to any docker repository and pull it on to the droplet?
Or I can upload it directly?
Or I have to scp my source code to droplet and run same process as on my local machine, building image and then runnjng a container?
But what if I edit my code? - as I understood I must stop the container, remove an image and then build it again. This is a bit tricky for such a common situation - or am I doing things wrong?
Don't delete the image just rebuild it. It will be much faster than the first initial build. Also why is it tricky? It's just one or two commands, you can create a bash or .bat script if it gets annoying.
I have created a docker droplet on a DO: Whats the way to deploy my app?
All three options are a possibility. For the second one you would have to set up your VM as a docker-hub repo which might be more than you need. Using docker hub isn't bad. You could also just build the image on your server. I recommend using docker hub for it's ease and having watchtower set up on your server to restart your web app on new image pushes.
Edit: the above advice was for a VM not a docker droplet. I'm not familiar with DO but this article should help:
https://blog.machinebox.io/deploy-machine-box-in-digital-ocean-385265fbeafd
Summary
So I'm trying to figure out a way to use docker to be able to spin up testing environments for customers rather easily. Basically, I've got a customized piece of software that want to install to a Windows docker container (microsoft/windowsservercore), and I need to be able to access the program folder for that software (C:\Program Files\SOFTWARE_NAME) as it has some logs, imports/exports, and other miscellaneous configuration files. The installation part was easy, and I figured that after a few hours of messing around with docker and learning how it works, but transferring files in a simple manner is proving far more difficult than I would expect. I'm well aware of the docker cp command, but I'd like something that allows for the files to be viewed in a file browser to allow testers to quickly/easily view log/configuration files from the container.
Background (what I've tried):
I've spent 20+ hours monkeying around with running an SSH server on the docker container, so I could just ssh in and move files back and forth, but I've had no luck. I've spent most of my time trying to configure OpenSSH, and I can get it installed, but there appears to be something wrong with the default configuration file provided with my installation, as I can't get it up and running unless I start it manually via command line by running sshd -d. Strangely, this runs just fine, but it isn't really a viable solution as it is running in debug mode and shuts down as soon as the connection is closed. I can provide more detail on what I've tested with this, but it seems like it might be a dead end (even though I feel like this should be extremely simple). I've followed every guide I can find (though half are specific to linux containers), and haven't gotten any of them to work, and half the posts I've found just say "why would you want to use ssh when you can just use the built in docker commands". I want to use ssh because it's simpler from an end user's perspective, and I'd rather tell a tester to ssh to a particular IP than make them interact with docker via the command line.
EDIT: Using OpenSSH
Starting server using net start sshd, which reports it starting successfully, however, the service stops immediately if I haven't generated at least an RSA or DSA key using:
ssh-keygen.exe -f "C:\\Program Files\\OpenSSH-Win64/./ssh_host_rsa_key" -t rsa
And modifying the permissions using:
icacls "C:\Program Files\OpenSSH-Win64/" /grant sshd:(OI)(CI)F /T
and
icacls "C:\Program Files\OpenSSH-Win64/" /grant ContainerAdministrator:(OI)(CI)F /T
Again, I'm using the default supplied sshd_config file, but I've tried just about every adjustment of those settings I can find and none of them help.
I also attempted to setup Volumes to do this, but because the installation of our software is done at compile time in docker, the folder that I want to map as a volume is already populated with files, which seems to make docker fail when I try to start the container with the volume attached. This section of documentation seems to say this should be possible, but I can't get it to work. Keep getting errors when I try to start the container saying "the directory is not empty".
EDIT: Command used:
docker run -it -d -p 9999:9092 --mount source=my_volume,destination=C:/temp my_container
Running this on a ProxMox VM.
At this point, I'm running out of ideas, and something that I feel like should be incredibly simple is taking me far too many hours to figure out. It particularly frustrates me that I see so many blog posts saying "Just use the built in docker cp command!" when that is honestly a pretty bad solution when you're going to be browsing lots of files and viewing/editing them. I really need a method that allows the files to be viewed in a file browser/notepad++.
Is there something obvious here that I'm missing? How is this so difficult? Any help is appreciated.
So after a fair bit more troubleshooting, I was unable to get the docker volume to initialize on an already populated folder, even though the documentation suggests it should be possible.
So, I instead decided to try to start the container with the volume linked to an empty folder, and then start the installation script for the program after the container is running, so the folder populates after the volume is already linked. This worked perfectly! There's a bit of weirdness if you leave the files in the volume and then try to restart the container, as it will overwrite most of the files, but things like logs and files not created by the installer will remain, so we'll have to figure out some process for managing that, but it works just like I need it to, and then I can use windows sharing to access that volume folder from anywhere on the network.
Here's how I got it working, it's actually very simple.
So in my dockerfile, I added a batch script that unzips the installation DVD that is copied to the container, and runs the installer after extracting. I then used the CMD option to run this on container start:
Dockerfile
FROM microsoft/windowsservercore
ADD DVD.zip C:\\resources\\DVD.zip
ADD config.bat C:\\resources\\config.bat
CMD "C:\resources\config.bat" && cmd
Then I build the container without anything special:
docker build -t my_container:latest .
And run it with the attachment to the volume:
docker run -it -d -p 9999:9092 --mount source=my_volume,destination="C:/Program Files (x86)/{PROGRAM NAME}" my_container
And that's it. Unfortunately, the container takes a little longer to start (it does build faster though, for what that's worth, as it isn't running the installer in the build), and the program isn't installed/running for another 5 minutes or so after the container does start, but it works!
I can provide more details if anyone needs them, but most of the rest is implementation specific and fairly straightforward.
Try this with Docker composer. Unfortunately, I cannot test it as I'm using a Mac it's not a "supported platform" (way to go Windows). See if that works, if not try volume line like this instead - ./my_volume:C:/tmp/
Dockerfile
FROM microsoft/windowsservercore
# need to ecape \
WORKDIR C:\\tmp\\
# Add the program from host machine to container
ADD ["<source>", "C:\tmp"]
# Normally used with web servers
# EXPOSE 80
# Running the program
CMD ["C:\tmp\program.exe", "any-parameter"]
Docker Composer
Should ideally be in the parent folder.
version: "3"
services:
windows:
build: ./folder-of-Dockerfile
volume:
- type: bind
source: ./my_volume
target: C:/tmp/
ports:
- 9999:9092
Folder structure
|---docker-composer.yml
|
|---folder-of-Dockerfile
|
|---Dockerfile
Just run docker-composer up to build and start the container. Use -d for detach mode, should only use once you know its working properly.
Useful link Manage Windows Dockerfile