I'm creating a document that consists of an 8.5"x11" survey, a #10 envelope and a #9 return-envelope. I use the appropriate AddPage calls and the resulting PDF appears to have all of the correct formatting.
When I print it, though, every page only comes out on 8.5"x11" paper...
Is there something in particular that I need to be doing to enable multiple page formats in a single document?
So, it appears that this is an issue with each particular reader/viewer, where, as far as I can tell, the end user is required, on a case by case basis, to manually override using the default paper size and tell the print engine to use the paper size(s) specified by the document instead. It's frustrating that this wouldn't be the default configuration, but this appears to be the only solution that I could find.
Related
I am trying to find the correct template and id to use for a hotprint of an advanced pdf template of an Item Fulfillment.
The hot print url is (with the id bolded) https://system.na3.netsuite.com/app/accounting/print/hotprint.nl?regular=T&sethotprinter=T&id=7600&label=Packing%20Slip&printtype=packingslip&trantype=itemship&orgtrantype=TrnfrOrd&auxtrans=7605
For some reason only certain id=# seems to affect the outcome and the ids I have got to work for two different templates don't match the Custom Transaction Forms ID or the Advanced pdf script id. (example most ids=template 1, while 168,4954, and seemingly random other ids=template 2) I am very confused on how netsuite resolves the hot print url as it normally doesn't include the template= part though I have seen others use it for invoice print urls.
The parameters at the end of the url (the stuff after the ?) are used by Netsuite to control settings used by the webpage which prints the PDFs for you.
In this case, &id=##### refers to the internal id of the document you are printing. You can see this by going to the document, right clicking, selecting inspect, and typing nlapiGetRecordId() into the console. When you click Print, you should see that same number after &id=#####.
&template=### refers to the template you are printing. If you go to Customization -> Forms -> Advanced PDF/HTML Templates, you'll notice a Script ID field in the table. If you substitute the correct Script ID in for the number in &template=###, you'll notice you generate the same PDF. This Script ID acts the same as the number that was previously there.
The reason you're seeing unusual results when you change those numbers is because you're mismatching a record with a template not built for it. So it won't print exactly right, but will sometimes execute anyways.
Anyways, this sort of parameter scheme is a similar scheme to how Suitelets and Restlets work, so in the future, you might experience this sort of thing again.
EDIT: For those reading this in the future, please read the comments.
To customize a packing slip and return form:
If you are printing packing slips and need some customization, you can use a custom invoice form when printing packing slips. For example, you can customize an invoice form to hide the fulfilled item tax rate and amount, and the order total. Then, when you print the packing slip using the custom form through mass print, choose the the packing slip shows the customized information.
I use LibreOffice Writer and I want to insert an alternative text to a specific phrase in the document, how can I do it?
Example if we have an image in the document we can make double left click and add the alternative text like this:
Is it possible to make the same if we select a whole phrase of text? If yes how? And if No is there any other proposal?
The alternative text in 'word'/odt documents is actually intended as the 'alt' attribute in HTML (web) pages:
The alt attribute provides alternative information for an image if a
user for some reason cannot view it (because of slow connection, an
error in the src attribute, or if the user uses a screen reader).
(http://www.w3schools.com/tags/att_img_alt.asp)
It's only purpuse is thus to provide the user with information in case he/she can not view the image. Since having alternative text in case some text cannot be displayed is, well, silly, this 'alt' attribute is not defined for pieces of text. Alternatively, you could have a hyperlink pointing to nothing ("#"), which does provide a tooltip attribute.
What is it that you're intending to achieve anyway? It's not going to show up on any prints, which is the intended purpose of Writer... Footnotes (for prints) or Comments (for communication with co-editors) might suit you better.
I want to save final data from console output to file without intermediate.
How can i do that?
The report module exports all info into html in JSON format. You can get some info from there (cumulative percentiles, for example). You even don't have to modify python code in that case, just add some JS to the page that generates a table.
On the other hand, if you want something more then that info included there, you should implement it in the report module.
What particular pieces of last screen data are you interested in?
P.S by the way, one may create a couple of templates and then provide the template parameter in report section of load.ini to specify which one you want to use.
This screen is good report only for "const" benchmarking. For "line" and "step" ramping the last screen always demonstrates the worst timings and resources. But we are thinking about this feature request.
Since I'm not really seeing any content anywhere that doesn't point back to the original Microsoft documents on this matter, or source code that really doesn't seem to answer the questions I'm having, I thought I might ask a few things here. (Delphi tag is there because that's what my dev environment is on the code I'm making from this)
That said, I had a few questions the API document wasn't answering. First one: fdi_notify messages. What is "my responsibility" is in coding these: fdintCABINET_INFO: fdintPARTIAL_FILE: fdintNEXT_CABINET: fdintENUMERATE: ? I'll illustrate what I mean by an example. For fdintCLOSE_FILE_INFO, "my responsibility" is to Close a file related to handle given me, and set the file's date and time according to the data passed in fdi_notify.
I figure I'm missing something since my code isn't handling extracting spanned CAB files...any thoughts on how to do this?
What you're more than likely running into is that FDICopy only reads the cab you passed in. It will use fdintNEXT_CABINET to get spanned data for any files you extract in response to fdintCOPY_FILE, but it only calls fdintCOPY_FILE for files that start on that first cab.
To get a directory listing for the entire set, you need to call FDICopy in a loop. Every time you get a fdintCABINET_INFO event, save off the psz1 parameter (next cab name). When FDICopy returns, check that. If it's an empty string you're done, if not call FDICopy again with the next cab as the new path.
fdintCABINET_INFO: The only responsibility for this is returning 0 to continue processing. You can use the information provided (the path of the next cabinet, next disk, path name, nad set ID), but you don't need to.
fdintPARTIAL_FILE: Depending on how you're processing your cabs, you can probably ignore this. You'll only see it for the second and later images in a set, and it's to tell you that the particular entry is continued from a previous cab. If you started at the first cab in the set you'll have already seen an fdintCOPY_FILE for the file. If you're processing random .cabs, you won't really be able to use it either, since you won't have the start of the file to extract.
fdintNEXT_CABINET: You can use this to prompt the user for a new directory for the next cabinet, but for simple spanning support just return 0 if the passed in filename is valid or -1 if it isn't. If you return 0 and the cab isn't valid, or is the wrong one, this will get called again. The easiest approach (if you don't request a new disk/directory), is just to check pfdin^.fdie. If it's FDIError_None it's equal the first time being called for the requested cab, so you can return 0. If it's anything else it's already tried to open the requested cab at least once, so you can return -1 as an error.
fdintENUMERATE: I think you can ignore this. It isn't covered in the documentation, and the two cab libraries I've looked at don't use it. It may be a leftover from a previous API version.
I'm building a site that shows changes in deals that we have in our db. For example, if a deals status changes from pending to win, I want to show it, and if the value goes up or down, I want to show it, that kind of thing. Also, if you open the overview page, I want it to show the history of changes. So I need some kind of change logging, to be able to look in the past. How do I do this?
It is a rails project, but I think that's irrelevant.
I doubt there is any generic solution to this problem.
You can roll out your own. Start by considering all objects that need change logging. How many types are there? How often do you expect changes to occur? This will help you estimate the potential number of changes throughput you'll need to be dealing with. If there aren't too many, just stick them into database. If you are generating a lot, try storing to comma-separated-value file.
I have implemented a similar system before. I had 3 types of changes: 1) property value change, 2) adding of a value to a list, 3) removing value from a list.
I used the following format, stored in a log file:
//For type 1)
1,2011/01/01 00:00:00,MyObject,myProperty,oldValue,newValue
//For type 2)
2,2011/01/01 00:00:00,MyObject,myListProperty,addedValue
//For type 3)
3,2011/01/01 00:00:00,MyObject,myListProperty,removedValue
This captured most information I needed. The value parts were just some user-readable summary of the changed/added/removed property value.
Paper Trail Gem
Since you're on Rails, take a look at the PaperTrail gem. It does exactly what you're looking for and is beautifully built. You'll just need to add in a callback so that your overview page knows that a change occurred. But for the history of a model, just use the built-in PaperTrail functionality.