For a league I run we keep track of games played and w/l/t and calculate that into a ranking score. The player name is listed in column U and the ranking score in column AD of a fixed table. I then use an array formula to list the players in ranking order in column E (then vlookup to pull in other stats based on the value in E for that row). Specifically I use this formula in column E:
=ARRAY_CONSTRAIN(ARRAYFORMULA(INDEX($U$4:$U$153,MATCH(LARGE($AD$4:$AD$153-ROW($AD$4:$AD$153)/COUNT($AD$4:$AD$153),ROW(E72)-ROW(E$4)+1),$AD$4:$AD$153-ROW($AD$4:$AD$153)/COUNT($AD$4:$AD$153),0))), 1, 1)
I need to be able to add players to the table in U:AD without having to edit the formula every time, i.e. from $U4:$U153 and $AD$4:$AD$153 to $U4:$U154 and $AD$4:$AD$154 in all the various places in the formula then copy the new formula all the way down.
Is there a way that I could define the range as $U$4:$U(last populated row) and the same for column AD in the above formula?
I eventually be using this in both Excel and Google Sheets so I would really like to avoid scripting. First I'm looking to solve this for Google Sheets.
Here is a copy of the sheet I am working on.
You could use INDEX and COUNTA
Instead of $U4$U153,
$U4:INDEX(U4:U,COUNTA(A4:A))
The COUNTA portion will give the number of populated rows and feed it into INDEX to give $U4:$U153
The answer for the Google sheet that you shared.
skip to the end for the simple solution
I used the indirect method by entering a formula in E1 that counts the AD column for player stats and adds 3 to get the last row. (I was going create the full range AD4:AD?? but you also have U4:U73 in the formula)
=counta(AD4:AD)+3
I then changed your formula use indirect, indirect("$AD$4:AD"&E$1), to reference the last row number in cell E1 to create the required range.
=iferror(ARRAY_CONSTRAIN(ARRAYFORMULA(INDEX(indirect("$U$4:U"&E$1),MATCH(LARGE(indirect("$AD$4:AD"&E$1)-ROW(indirect("$AD$4:AD"&E$1))/COUNT(indirect("$AD$4:$AD"&E$1)),ROW(E4)-ROW(E$4)+1),indirect("$AD$4:$AD"&E$1)-ROW(indirect("$AD$4:$AD"&E$1))/COUNT(indirect("$AD$4:AD"&E$1)),0))), 1, 1),"")
I discovered by accident that if you remove the ARRAY_CONSTRAIN from your formula and change U4:U73 to U4:AC73 then the formula will populate the scores to the right of your formula where you currently have vlookups. I put an example of this in E4 but note that you will have to delete the vlookup formulas if you want to fill the formula down otherwise it will show REF
I also added iferror so that the formula can be copied to the same row as the end of the "open slots" in column A without showing errors.
Also, I got to this point and was thinking that since you're using Google Sheets, a better way to do this could be to use the QUERY function to pull the data and also sort it using ORDER BY with a single formula in cell E4.
I've not really used the QUERY function but maybe it's time to learn.
EDIT
Turns out it doesn't take much learning
=QUERY(U4:AD,"SELECT U,V,W,X,Y,Z,AA,AB,AC ORDER BY AD DESC")
Put the formula above in cell E4 and delete everything beneath and scores to the right and you're done. you'll notice that there is no indirect because Google understands that you don't want the blank rows.
https://docs.google.com/spreadsheets/d/16IclEmKwDFdInIAZhH2vt-tLJ5pbwX06jv9xrUXwhnY/edit?usp=sharing
Why are you using $ signs around U4:U153,remove $ signs for rows that will give you flexibility while keeping columns fixed.As your drag the formula,the data array will append the newly filled cells or you can create table using Ctrl+T that will automatically expand as you keeping adding data.
Related
Collections Sheet
Expenses Sheet
Hi, I would like to get the daily sum/difference of the expenses from the expenses sheet then output to collections sheet using dates as reference/identifier.
I tried this code =MINUS(C8,INDEX(Expenses!20:31,12,2)) but I want it to auto compute when I drag the box. sorry for bad english. thank you
Desired output:
Desired Output
Output at (Net) Cash On Hand Row / Reference Date Column, the output should be August 1 Collection - August 1 Expenses.
The main issue is with the structure of your expense sheet, since you need to use only every second column. For this you can use various methods, something like
=split(substitute(join(";",Expenses!A2:DJ2),"Total:;",""),";")
The join function takes the whole row and joins it into one string, the substitute function removes the Total: from it, along with the trailing ; and the split function separates it again to separate values. This will be an array, automatically spread out to 31(-ish) columns width if entered into a cell like C10 on your Collections sheet.
Then you have two options, simply do =C8-C10 in C9, which you can drag with no problem. You can also hide the row 10 by making the text color white, or even integrate it in that sheet.
My recommendation however is not to do any of that, instead enter the formula
=arrayformula(C8:AG8 - split(substitute(join(";",Expenses!A2:DJ2),"Total:;",""),";")
into C9 on the Collections sheet and it's taken care of, without the need to drag it out. You might need to tweak it, not sure if the AG8 and DJ2 are the correct columns to end them on (should be the last column if every column or every 2 columns is a day). The arrayformula makes sure that the subtractions are done automatically for each pair of values, and expanded automatically into the row. Make sure that there are no values or formulas in D9:AG9, so it can fill up the values automatically and you don't get a #REF error.
I have no idea how to title this post, apologize in advance.
I have several sheets with a number in Column I and a name centered and merged in columns A:H. I want to obtain the name from A:H of the corresponding value within I but do have duplicates, therefore I need the nth value when permitted. The formula I have so far works up to the point it does not autofill down as an ArrayFormula, so when I drag the formula down I get an #REF! error due to the fact that when a duplicate is found it cannot overwrite the formula below.
This will be easier to showcase: LINK TO SHEET.
Essentially, in the main sheet all the values in I:I of all the other sheets are obtained and sorted, then using that column I want to return the name that corresponds to the value, allowing for duplicates to work themselves out. I believe my issues resides in the $B1 part at the end of the formula preventing it from being an array.
=ARRAYFORMULA(UNIQUE(FILTER({Sheet2!$A$1:$A;Sheet3!$A$1:$A;Sheet4!$A$1:$A},{Sheet2!$I$1:$I;Sheet3!$I$1:$I;Sheet4!$I$1:$I}=$B1)))
Cell F2 on the Sheet1 tab:
=QUERY({Sheet2!A:I;Sheet3!A:I;Sheet4!A:I},"select Col1,Col9 where Col9>0 order by Col9 asc",0)
You can read more about query here.
I'm creating a Google Sheet documenting how many times a certain item appears in a video game with the formula in the D column (formatted to a percent):
=IFERROR(C2/SUM(C2:C51))
I want the "C2" cell to apply down the column (C3, then C4, you get the idea), but I want the "C2:C51" array to stay constant while the C2 part gets applied down the down the column. How could I modify the formula to do this? (I could manually edit the formulas all the way down, I only have 50 rows, but I think it would be helpful to learn for the future)
Try this:
=iferror(C2 / sum(C$2:C$51))
See absolute and relative references.
Alternatively, try this array formula that fills a whole column in one go:
=arrayformula(iferror(C2:C51 / sum(C2:C51)))
I want to do a complex formula using google sheets:
I have a list of place that will be visited by different people.
Some places are not to be visited, marked with /
Some places need to be assigned, marked with ?
Wanted outcome:
A list of cells that changes every day automatic.
An overview of who is going where that day and what needs to be assigned.
So I need a formula that can select a row based on today() and then filter out Persons in that row. Then for each person, another formula that looks up the first row in the table and puts duplicates together.
Example:
Wanted outcome:
Link to excel file, but it needs to work in google sheets too: xlsx
My solution is not the most elegant but it does the job.
First I build a column with date and unique persons or ? in this column:
=unique(sort(transpose(index(A1:H10,match(today(),A1:A10,0)))))
Then I find Places corresponding to these persons (I use filter function for it and then I use textjoin to keep them in single cell).
The formula is copied down as filter function does not accept a range and arrayformula as a filtering criterium.
My solution is available here:
https://docs.google.com/spreadsheets/d/1GTy_UaFP8LbA8OLnEhT_R_twpDCIWCuvQfBAigqtbR0/copy
I have the following COUNTIF Formula in my Google Sheet.
=COUNTIFS('Events/Incidents'!$E$3:$E,X4,'Events/Incidents'!$I$3:$I,"Accident")
This is a sample of the sheet which has the formula in the first row under the "Accidents" header:
It works until a user adds a row 3 to the top of the source sheet (Events/Incidents) then the formula changes to the following so that it captures row 4 down instead of the desired row 3.
=COUNTIFS('Events/Incidents'!$E$4:$E,X4,'Events/Incidents'!$I$4:$I,"Accident")
I used the Query function for "All Events" (the first 3 columns). The Countif formula is under each of the Incidents. In my Countif example, X4 is the Employee, John White which was returned in the QUERY.
The QUERY continues to return/include row 3 but I don't know how to do this for the individual Incidents. I tried adding ArrayFormula to the Countif function but I have the same problem.
Would appreciate some help with this.
I understand that you want to update your QUERY to reflect the correct row without resorting to returning the Branch in every response. If my comprehension is correct, there is a way to reach your goals with little modification.
First, you'll have to create a named range that includes the whole table (from the headers to the last row). You can then use this named range in every formula so new rows can be detected without changing the formula per se.
Finally, you can modify your QUERY to return only the values of Incidents in a Branch with something similar to =QUERY(myNamedRange,"SELECT G WHERE A = 'Auckland'"). That QUERY won't return the Branch, only the Incidents. If you keep having any doubts, please ask me for further help.
I worked it out by combining Countifs with ImportRange:
=COUNTIFS(IMPORTRANGE("1-f6OU8ylDSlpqdpt4P5B7GDcIel3IboVkUbY2huMA6U","Events/Incidents!$E$3:$E"),X4,IMPORTRANGE("1-f6OU8ylDSlpqdpt4P5B7GDcIel3IboVkUbY2huMA6U","Events/Incidents!$I$3:$I"),"Accident")