I am using Chocolatey to install Docker.
When I originally run the following command:
choco install docker
and try to run the "docker --version" command, everything goes as expected.
Docker version 17.10.0-ce, build f4ffd25
When I try to run "dockerd" command, it shows as not being part of my path.
'dockerd' is not recognized as an internal or external command,
Looking at the PATH variable, and navigating to where Chocolatey stores the executables, dockerd.exe is not present while docker.exe is. Am I missing something in instructing Chocolatey in adding dockerd?
The reason I need the dockerd executable is so that I can limit the number of concurrent downloads, as shown in the Docker documentation.
This is a decision that the package maintainer(s) for Docker have made. If you have a look here:
https://chocolatey.org/packages/docker#files
You will see that there is a dockerd.exe.ignore file. This file is used to instruct Chocolatey to explicitly not create what is referred to as a shim file, which would make it work from the command line, in the same way as Docker does.
My best suggestion would be to reach out to the maintainers of that package to ask them why this was done, and to perhaps get it changed. You can do this by clicking on the Contact Maintainers link on this page:
https://chocolatey.org/packages/docker
As a workaround, you could add the following path to your Windows PATH environment variable:
C:\ProgramData\chocolatey\lib\docker\tools\docker
Which would allow it to work.
I am installing Jenkins 2 on windows,after installing,a page is opened,URL is:
http://localhost:8080/login?from=%2F
content of the page is like this:
Question:
How to "Unlock Jenkins"?
PS:I have looked for the answer in documentation and google.
Starting from version 2.0 of Jenkins you may use
-Djenkins.install.runSetupWizard=false
to prevent this screen.
Accroding to documentation
jenkins.install.runSetupWizard - Set to false to skip install wizard. Note that this leaves Jenkins unsecured by default.
Development-mode only: Set to true to not skip showing the setup wizard during Jenkins development.
More details about Jenkins properties can be found on this Jenkins Wiki page.
Check https://wiki.jenkins-ci.org/display/JENKINS/Logging to see where Jenkins is logging its files.
e.g. for Linux, use the command: less /var/log/jenkins/jenkins.log
And scroll down to the part: "Jenkins initial setup is required. An admin user has been created ... to proceed to installation:
[randompasswordhere] <--- Copy and paste
Linux
By default logs should be made available in /var/log/jenkins/jenkins.log, unless customized in /etc/default/jenkins (for *.deb) or via /etc/sysconfig/jenkins (for */rpm)
Windows
By default logs should be at %JENKINS_HOME%/jenkins.out and %JENKINS_HOME%/jenkins.err, unless customized in %JENKINS_HOME%/jenkins.xml
Mac OS X
Log files should be at /var/log/jenkins/jenkins.log, unless customized in org.jenkins-ci.plist
open file: e:\Program Files (x86)\Jenkins\secrets\initialAdminPassword
copy content file: 47c5d4f760014e54a6bffc27bd95c077
paste in input: http://localhost:8080/login?from=%2F
DONE
Some of the above instructions seem to have gone out of date. As of the released version 2.0, creating the following file will cause Jenkins to skip the unlock screen:
${JENKINS_HOME}/jenkins.install.InstallUtil.lastExecVersion
This file must contain the string 2.0 without any line terminators. I'm not sure if this is required but Jenkins also sets the owner/group to be the same as the Jenkins server, so that's probably a good thing to mimic as well.
I did not need to create the upgraded or .last_exec_version files.
I assume you were running jenkins.war manually with java -jar jenkins.war, then all logging information by default is output to standard out, just type the token to unlock jenkins2.0.
If you were not running jenkins with java -jar jenkins.war, then you can always follow this Official Document to find the correct log location.
Open your terminal and type code below to find all the containers.
docker container list -a
You will find jenkinsci/blueocean and/or docker:dind if not than
docker container run --name jenkins-docker --rm --detach ^
--privileged --network jenkins --network-alias docker ^
--env DOCKER_TLS_CERTDIR=/certs ^
--volume jenkins-docker-certs:/certs/client ^
--volume jenkins-data:/var/jenkins_home ^
--volume "%HOMEDRIVE%%HOMEPATH%":/home ^
docker:dind
and
docker container run --name jenkins-blueocean --rm --detach ^
--network jenkins --env DOCKER_HOST=tcp://docker:2376 ^
--env DOCKER_CERT_PATH=/certs/client --env DOCKER_TLS_VERIFY=1 ^
--volume jenkins-data:/var/jenkins_home ^
--volume jenkins-docker-certs:/certs/client:ro ^
--volume "%HOMEDRIVE%%HOMEPATH%":/home ^
--publish 8080:8080 --publish 50000:50000 jenkinsci/blueocean
run command
docker run jenkinsci/blueocean
or
docker run docker:dind
Copy and Paste the secret key.
One method to prevent the installation wizard is to do the following in $JENKINS_HOME:
Create an empty file named .last_exec_version
Create a file named upgraded
If left empty, a banner will prompt you to "upgrade" to 2.0 (which just means install a bunch of new plugins like Pipeline)
If the contents of that file is 2.0, you'll receive no banner and it will act like an regular old Jenkins install
Remember, this wizard is in place to prevent unauthorized access to Jenkins during setup. However, bypassing this wizard can be useful if, for example, you want to deploy automated installations of Jenkins with something like Ansible/Puppet/etc.
This was tested against Jenkins 2.0-beta-1 – so these instructions may not work in future beta or stable releases.
In the mac use:
sudo more /Users/Shared/Jenkins/Home/secrets/initialAdminPassword
I have seen a lot of response to the question, most of them were actually solution to it but they solve the problem when jenkins is actually run as a standalone CI without Application container using the command:
java -jar jenkins.war
But when running on Tomcat as it is the case in this scenario, Jenkins logs are displayed on the catalina logs since the software is running on a container.
So you need to go to the logs folder:
C:\Program Files\tomcat_folder\Tomcat 8.5\logs\catalina.log
in my own case. Just scroll almost to the middle to look for a generated password which is essentially a token and copy and paste it to unlock jenkins.
I hope this fix your problem.
Step 1: Open the terminal on your mac
Step 2: Concatenate or Paste
sudo cat **/Users/Shared/Jenkins/Home/secrets/initialAdminPassword**
Step 3: It will ask for password, type your mac password and enter
Step 4: A key would be generated.
Step 5: Copy and paste the security token in Jenkins
Step 6: Click continue
I found the token in the following file in the installation dir:
<jenkins install dir>\users\admin\config.xml
and the element
<jenkins.install.SetupWizard_-AuthenticationKey>
<key> THE KEY </key>
</jenkins.install.SetupWizard_-AuthenticationKey>
You might see it in the catalina.out. I installed Jenkins war in tomcat and I can see this in the catalina.out
The below method does not work anymore on 2.42.2
Create an empty file named .last_exec_version
Create a file named upgraded
If left empty, a banner will prompt you to "upgrade" to 2.0 (which just means install a bunch of new plugins like Pipeline)
If the contents of that file is 2.0, you'll receive no banner and it will act like an regular old Jenkins install
mostly jenkins will show you the path for initialAdminPassword if you dont find it there, then you have to check jenkins logs
in log you will see
05-May-2017 01:01:41.854 INFO [Jenkins initialization thread] jenkins.install.SetupWizard.init
Jenkins initial setup is required. An admin user has been created and a password generated.
Please use the following password to proceed to installation:
7c249e4ed93c4596972f57e55f7ff32e
This may also be found at: /opt/tomcat/.jenkins/secrets/initialAdminPassword
Use a lil shortcut to get to the folder:
cmd + shift + g
then insert /Users/Shared/Jenkins
there u can see the secrets folder - probably shows that it's locked.
to unlock it: right click on the folder and click info + click on the lock at the bottom. now u can change the rights shown at the bottom of the window
hope that helped :)
Greetings, Stefanie ^__^
If unable to find Jenkins password in the location C:\Windows\System32\config\systemprofile\.jenkins\secrets\initialAdminPassword
by installing Jenkins generic war on Tomcat server, try below
Solution:
Set environmental variable JENKINS_HOME to your jenkins path say
JENKINS_HOME ="C:/users/username/apachetomcat/webapps/jenkins"
Place Jenkins.war in the webapp folder of Tomcat and start Tomcat,
initial admin password gets generated in the path
C:\Program Files (x86)\Apache Software Foundation\Tomcat 9.0\webapps\jenkins\secrets\initialAdminPassword
Yet another way to bypass the unlock screen is to copy the UpgradeWizard state to the InstallUtil last execution version, add an install.runSetupWizard file with the contents 'false', and update the config.xml installStateName from NEW to RUNNING.
docker exec -it jenkins bash
sed -i s/NEW/RUNNING/ /var/jenkins_home/config.xml
echo 'false' > /var/jenkins_home/jenkins.install.runSetupWizard
cp /var/jenkins_home/jenkins.install.UpgradeWizard.state /var/jenkins_home/jenkins.install.InstallUtil.lastExecVersion
exit
docker restart jenkins
For reference, this is the command I use to run jenkins:
docker run --rm --name jenkins --network host -u root -d -v jenkins:/var/jenkins_home -v /var/run/docker.sock:/var/run/docker.sock jenkinsci/blueocean:1.16.0
You will also want to update the config with the Root URL:
echo "<?xml version='1.1' encoding='UTF-8'?><jenkins.model.JenkinsLocationConfiguration><jenkinsUrl>http://<IP>:8080/</jenkinsUrl></jenkins.model.JenkinsLocationConfiguration>" > jenkins.model.JenkinsLocationConfiguration.xml
exit
docker restart jenkins
In case, if you installed/upgraded new versions of jenkins and unable to find admin credentials on server then, ...
if you are using old version of jenkins and on the top of it you are trying to reinstall/upgrade new version of jenkins then,
the files under "JENKINS_HOME", namely -
${JENKINS_HOME}/jenkins.install.InstallUtil.lastExecVersion
${JENKINS_HOME}/jenkins.install.UpgradeWizard.state
will cause jenkins to skip the unlock (or admin credentials screen) and webpage directly ask you for username and password. even on server you will not able to find "${JENKINS_HOME}/secrets/initialAdminPassword".
In such case, don't get panic. just try to use old admin user creds in newly installed/upgraded jenkins server.
In simple language, if you have admin creds as admin/admin in old version of jenkins server then, after upgrading jenkins server, the new server won't ask you set password for admin user again. in fact it will use old creds only.
I have found the password in C:\Program Files\Jenkins\jenkins.err. Open jenkins.err text file and scroll down, and you will find the password.
Go to C:\Program Files (x86)\Jenkins\secrets
then with notepad ++ open file initail Admin Password and paste its content.
thats it
-->if you are using linux machine, then login as root user: sudo su
-->then go to the below path: cd /var/lib/jenkins/secrets
-->just view the IntialAdminPassword file ,you can see the secret key.
-->paste the secret key into jenkins window,it will be unlocked.
https://issues.jenkins-ci.org/browse/JENKINS-35981
Try this %2Fjenkins%2F instead of %2Fjenkins in the browser
Open the terminal on your mac and open new window (command+T)
Paste sudo cat /Users/Shared/Jenkins/Home/secrets/initialAdminPassword
It will ask for password, type your password(i gave my mac password, i haven't check if any other password would work) and enter
A key would be generated.
Copy the key and paste it where it asks you to enter admin password
click continue
The problem can be fixed in latest version: mine is 2.4. The error comes because of %2fjenkins%2f in URL. The previous version was coming with %2fjenkins and the same error used to come. They have resolved the issue, but the URL has been changed from %2fjenkins to %2fjenkins%. So as a summary in the URL currently %2fjenkins% is coming. before passing the admin password change it to %2fjenkins. Along with that add a .last_exec_version empty file.
If someone chooses running Jenkins as a Docker container, may face the same problem with me.
Because accessing-the-jenkins-blue-ocean-docker-container is quite different,
Common problem is /var/lib/jenkins/secrets: No such file or directory
You need to access through Docker, the link Jenkins provide is quite helpful.
Except <docker-container-name> maybe not specified, then you may need to use the container ID.
After
docker exec -it jenkins-blueocean bash
or
docker exec -it YOUR_JENKINS_CONTAINER_ID bash
The /var/lib/jenkins/secrets/initialAdminPassword would be accessible.
The password would be there.
I have setup Jenkins using Brew, But when I restarted Mac Jenkins was asking for initialAdminPassword(The screenshot attached in question)
And the problem was it was not generated under sercret directory.
So I'd found the Jenkins process which was running on port: 8080 using: $ sudo lsof -i -n -P | grep TCP and killed it using $ sudo kill 66(66 was process id).
Then I downloaded the latest jenkins .war file from: https://jenkins.io/download/
And executed command: $ java -jar jenkins.war (Make sure you are in jenkins.war directory).
And that's it everything is working fine.
This works well when you are stuck with Docker on Windows and are using Git-Bash
Presuming something like:
# docker run --detach --publish 8080:8080 --volume jenkins_home:/var/jenkins_home --name jenkins jenkins/jenkins:lts
Execute to get the Container ID, for example "d56686cb700d"
# docker ps -l
Now tell Docker to return the password written in the logs for that Container ID:
# docker logs d56686cb700d 2>&1 | grep -A5 -B5 Admin
2>&1 redirects stderr to stdout
-A5 includes 5 lines AFTER the line with "Admin" in it
-B5 includes 5 lines BEFORE the line with "Admin" in it
Output example:
Jenkins initial setup is required. An admin user has been created and a password generated.
Please use the following password to proceed to installation:
47647383733f4387a0d53c873334b707
This may also be found at: /var/jenkins_home/secrets/initialAdminPassword
*************************************************************
*************************************************************
*************************************************************
I found it under below directory. Full issue detail https://github.com/jenkinsci/ibm-security-appscansource-scanner-plugin/issues/2
C:\Windows\SysWOW64\config\systemprofile\AppData\Local\Jenkins\.jenkins
Open jenkins.err file in C:\Program Files\Jenkins\.
In that file check for a hash key after this line
Jenkins initial setup is required. An admin user has been created and a password generated.
Please use the following password to proceed to installation:
And paste it there in the jenkins prompt. Worked for me.
To solve this problem for docker container in Ubuntu 18.04.5 LTS (Bionic Beaver) - Ubuntu Releases
1- connect to your docker server or ubuntu server witch ssh or other method
2- run sudo docker ps
3- copy the container name parameter ("NAMES")
4- run sudo docker logs "your_parameters_NAMES_VALUES"
5- Find the folowing sentence "Jenkins initial setup is required. An admin user has been created and a password generated.
Please use the following password to proceed to installation:" and copy the password
I'm attempting to install Bitbucket server on my linux server. I'm following the steps here. I'm stuck at step 3. I've installed Bitbucket server, and now when trying to "Setup Bitbucket Server" I'm not able to access it from my browser.
I've done the following:
Using SSH I've went to the directory containing /atlassian/bitbucket/4.4.1/
I run the command bin/start-bitbucket.sh.
it gives the following message:
Starting Atlassian Bitbucket as current user
-------------------------------------------------------------------------------
JAVA_HOME "/usr/local/jdk" does not point to a valid Java home directory.
-------------------------------------------------------------------------------
----------------------------------------------------------------------------------
Bitbucket is being run with a umask that contains potentially unsafe settings.
The following issues were found with the mask "u=rwx,g=rwx,o=rx" (0002):
- access is allowed to 'others'. It is recommended that 'others' be denied
all access for security reasons.
- write access is allowed to 'group'. It is recommend that 'group' be
denied write access. Read access to a restricted group is recommended
to allow access to the logs.
The recommended umask for Bitbucket is "u=,g=w,o=rwx" (0027) and can be
configured in setenv.sh
----------------------------------------------------------------------------------
Using BITBUCKET_HOME: /home/wbbstaging/atlassian/application-data/bitbucket
Using CATALINA_BASE: /home/wbbstaging/atlassian/bitbucket/4.4.1
Using CATALINA_HOME: /home/wbbstaging/atlassian/bitbucket/4.4.1
Using CATALINA_TMPDIR: /home/wbbstaging/atlassian/bitbucket/4.4.1/temp
Using JRE_HOME: /usr/local/jdk
Using CLASSPATH: /home/wbbstaging/atlassian/bitbucket/4.4.1/bin/bitbucket-bootstrap.jar:/home/wbbstaging/atlassian/bitbucket/4.4.1/bin/bootstrap.jar:/home/wbbstaging/atlassian/bitbucket/4.4.1/bin/tomcat-juli.jar
Using CATALINA_PID: /home/wbbstaging/atlassian/bitbucket/4.4.1/work/catalina.pid
Existing PID file found during start.
Removing/clearing stale PID file.
Tomcat started.
Success! You can now use Bitbucket at the following address:
http://localhost:7990/
If you cannot access Bitbucket at the above location within 3 minutes, or encounter any other issues starting or stopping Atlassian Bitbucket, please see the troubleshooting guide at:
I try to access http://myserveraddress:7990, but i receive ERR_CONNECTION_REFUSED message. Is it because of the message JAVA_HOME "/usr/local/jdk" does not point to a valid Java home directory?
My server is running:
CentOS Linux release 7.2.1511
And I'm attempting to install
Bitbucket Server 4.4.1
Make sure you have java installed by running java --version
If it's not installed, start there. If it is installed, verify where by running find /-name java
Open /root/.bash_profile through your text editor. (I prefer to use vi editor)
And paste the given below two lines(noting that my below version may be different from what you see)
export JAVA_HOME=/usr/java/jdk1.7.0_21
export PATH=/usr/java/jdk1.7.0_21/bin:$PATH
Now enable the Java variable without system restart (On system restart it bydefault set the java variable)
source /root/.bash_profile
Now check the Java version,JAVA_HOME and PATH variables.It should show you correct information as you have set.
java --version
echo $JAVA_HOME
echo $PATH
Below is my system’s root bash_profile file
[root#localhost ~]# cat /root/.bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export JAVA_HOME=/usr/java/jdk1.7.0_21
export PATH=/usr/java/jdk1.7.0_21/bin:$PATH
[root#localhost ~]#
I am trying to execute a script over ssh connexion with Jenkins. I am using the SSH plugin and it is well configured. I arrive to execute the first part of the script, but when I try to execute a fpm command it says:
fpm: command not found
If I connect to the instance and run the same script that I call via Jenkins it runs and there is no error (fpm is installed).
So, I have created a test like a script test.sh:
#!/bin/bash -x
fpm
but, with Jenkins, I get the same error: fpm: command not found, while if I execute it I get a normal "parameter needed":
Missing required -s flag. What package source did you want? {:level=>:warn}
Missing required -t flag. What package output did you want? {:level=>:warn}
No parameters given. You need to pass additional command arguments so that I know what you want to build packages from. For example, for '-s dir' you would pass a list of files and directories. For '-s gem' you would pass a one or more gems to package from. As a full example, this will make an rpm of the 'json' rubygem: `fpm -s gem -t rpm json` {:level=>:warn}
Fix the above problems, and you'll be rolling packages in no time! {:level=>:fatal}
What am I missing? Why it cannot find fpm if it is installed?
Make sure fpm is in /usr/bin..
It seems that the problem came because the fpm was installed in the /home/user2connect/bin/, and the command was not recognised. For fixing this I had to call it wit the whole path:
/home/user2connect/bin/fpm ...
I have chosen to reinstall the fpm using sudo, so now it works.