After the latest updates to gcloud and docker I'm unable to access images on my google container repository. Locally when I run: gcloud auth configure-docker as per the instructions after updating gcloud, I get the following message:
WARNING: `docker-credential-gcloud` not in system PATH.
gcloud's Docker credential helper can be configured but it will not work until this is corrected.
gcloud credential helpers already registered correctly.
Running which docker-credential-gcloud returns docker-credential-gcloud not found.
I have no other gcloud-related path issues and for the life of me can't figure out how to install/add docker-credential-gcloud to path. Here's what I have installed (shown via gcloud version):
Google Cloud SDK 197.0.0
beta 2017.09.15
bq 2.0.31
container-builder-local
core 2018.04.06
docker-credential-gcr
gsutil 4.30
I also have Docker CE Version 18.03.0-ce-mac60 (23751).
Here's my $PATH:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin
I also ran source /usr/local/Caskroom/google-cloud-sdk/latest/google-cloud-sdk/path.zsh.inc on original gcloud install.
Notice: All docker-credential-gcr below can be replaced with docker-credential-gcloud. I think it is just different versions of gcloud, I might be wrong.
I used Homebrew Cask to install gcloud too. I installed docker-credential-gcr with
$ gcloud components install docker-credential-gcr
And then like you said, which docker-credential-gcr doesn't gave you anything.
So I ran which gcloud to find there is a symlink to gcloud in /usr/local/bin. This symlink is created by Homebrew when you installed gcloud at first place. Now docker-credential-gcr wasn't installed by Homebrew but by gcloud itself, so there isn't a symlink.
I called readlink /usr/local/bin/gcloud and found out gcloud is installed in /usr/local/Caskroom/google-cloud-sdk/latest/google-cloud-sdk/bin/.
Then:
$ ls /usr/local/Caskroom/google-cloud-sdk/latest/google-cloud-sdk/bin
There you should see docker-credential-gcr listed there.
I simply linked it to /usr/local/bin:
$ ln -s \
/usr/local/Caskroom/google-cloud-sdk/latest/google-cloud-sdk/bin/docker-credential-gcr \
/usr/local/bin/
Then run:
$ docker-credential-gcr configure-docker
It should succeed.
Just had the same issue on Windows, running Docker with Linux containers, Docker engine v19.03.8. Using docker compose. I do not use gcloud for my dockerfiles...
DT1001 dockerpycreds.errors.InitializationError:
docker-credential-gcloud not installed or not available in PATH
Option 1: Edit the docker configuration file and remove all gcloud entries from there.
Windows c:/Users/<your account>/.docker/config.json
Linux & MacOS ~/.docker/config.json
Option 2: Go to Troubleshoot -> Reset to factory defaults.
After this my docker compose was creating containers and running the images without any issues.
On MacOS
Step 1：
Install gcloud and docker-credential-gcr,
following this tutorial
Step 2:
$ ln -s /usr/local/google-cloud-sdk/bin/docker-credential-gcr /usr/local/bin/docker-credential-gcloud
Step 3:
$ rm -rf ~/.docker
Step 4:
$ docker-compose build --pull
Finished!
Never found a way to directly resolve the docker-credential-gcloud issue, but the following got me up and running again. WARNING: the following will delete all your existing docker images and install a bunch of gcloud utilities:
gcloud components install docker-credential-gcr,
Restart the terminal completely
docker-credential-gcr configure-docker.
screen ~/Library/Containers/com.docker.docker/Data/com.docker.driver.amd64-linux/tty
umount /var/lib/docker/overlay2
rm -rf /var/lib/docker
Restart the terminal completely.
The new version of google-cloud-sdk has only docker-credential-gcr but not docker-credential-gcloud anymore. On the other hand one of my python packages always requested docker-credential-gcloud.
The solution was to symlink docker-credential-gcloud to docker-credential-gcr:
ln -s /path/to/google-cloud-sdk/bin/docker-credential-gcr /usr/local/bin/docker-credential-gcloud
ls -l /usr/local/bin | grep docker should now print:
...
docker-credential-gcloud -> /path/to/google-cloud-sdk/bin/docker-credential-gcr
...
Usually, this error indicates that your $PATH variable has been clobbered by a package or program you have recently installed so that the Google Cloud SDK can't be found.
$PATH is altered by many programs when they install by altering ~/.profile, ~/.bash_profile or ~/.bashrc or their non-bash equivalents. With a bad $PATH, Google Cloud SDK is configured in docker but can't be seen as executables so we get this error. This assumes you have used the Google Cloud SDK in the past, but if gcloud is configured with your docker then you probably have. Don't reinstall gcloud or disable it, you already have it on your system and that is fine.
The solution then is to fix your $PATH, not to install anything.
echo $PATH
This should be a pretty long : delimited list of directories that your files are in. Do you see a google-cloud-sdk/bin in the string? Is the string way too short given all the trouble you've gotten into in your life on this computer? You use NVM but it is missing? Use Homebrew but it is missing? Try brew from the command line, does it work?
If the answer is "no" to any of the above, inspect the files above to see if there are any new entries at the bottom of each that might have broken things. Did you just install anything new?
Something is clobbering your $PATH and you need to figure out what that is. For me it is usually something to do with Anaconda Python via the conda init command. For you it might be nvm or something else. Figure out what it is and fix the problem. Don't start over with a new $PATH and install the same stuff over again or disable gcloud authentication.
It really seems to be something with the Homebrew Cask. I uninstalled the cask and then reinstalled the Google Cloud SDK by manually downloading the tar ball and running the packaged install script as described there.
Now docker-credential-gcloud is in my path:
$ which docker-credential-gcloud
/Users/moritz/google-cloud-sdk/bin/docker-credential-gcloud
I can't figure out what Google is trying to achieve here. On Linux there is docker-credential-gcloud and on Windows there is docker-credential-gcr.exe, and then there is docker-credential-gcloud.cmd which calls gcloud auth docker-helper. This is kind of a nightmare if you're trying to write portable build scripts or gradle rules because not everything seems capable of finding and calling docker-credential-gcloud.cmd when you exec docker-credential-gcloud... it might work from the dos prompt, but in general doesn't work.
After a ton of fooling around with .bat scripts, cygwin scripts, .cmd scripts and so forth, I found the best solution was to go into the gcloud installation and just copy docker-credential-gcr.exe docker-credential-gcloud.exe ... not a very satisfying solution, but is the only thing I found that would do the trick.
I got the issue when I tried to SSH from Google Cloud Build into an Engine VM Instance, so I had
steps:
- name: 'gcr.io/cloud-builders/gcloud'
args: ['compute', 'ssh',
'--project', '$PROJECT_ID',
'--zone', 'asia-southeast1-b',
'--strict-host-key-checking=no',
'username#instance-1',
'--command' ,'sh start.sh'
My start.sh
#!/bin/sh
echo "Started: $(date --iso-8601=seconds)"
docker pull gcr.io/aaa/bbbc/cccc
echo "Finished: $(date --iso-8601=seconds)"
The issue was How to set PATH when running a ssh command?
https://unix.stackexchange.com/questions/332532/how-to-set-path-when-running-a-ssh-command
So I just faced the same problem where I am trying to pull an image from GCR to an GCP instance and want to share my solution.
I ran gcloud auth configure-docker and got the warning:
WARNING: `docker-credential-gcloud\` not in system PATH.
gcloud's Docker credential helper can be configured but it will not work until this is corrected.
I applied the accepted answer for this thread and ran gcloud components install docker-credential-gcr and got a long error:
ERROR: (gcloud.components.install) You cannot perform this action because this Cloud SDK installation is managed by an external package manager.
Please consider using a separate installation of the Cloud SDK created through the default mechanism described at: https://cloud.google.com/sdk/
When no solution was working, I uninstalled the Google provided google-cloud-sdk package that was installed via snap and instlled with distro specifice package manager, for me that is apt-get as instructed in the Installing Google Cloud SDK: Installation options page and re-ran the gcloud auth configure-docker and this time it solved my problem.
In my case the problem was due to how WSL 1 works with Docker on Windows. At first I only installed and initialized gcloud in WSL Ubuntu, not in Windows. However as Docker daemon is actually run by Windows, you need to install gcloud for Windows as well (and don't forget to run all of the inits and authorizations there).
On Windows 10/11, you need to ensure that C:\Users\USERNAME\AppData\Local\Google\Cloud SDK\google-cloud-sdk\bin\ is added to your system $PATH environment variable. It may not have been added if the Google Cloud SDK was not able to add it during GCloud installation. So add it manually like this:
Windows Task Bar ➔ Press the search icon 🔍 or the search bar
Type "environment" ➔ and click on "Edit the System Environment Variables" (ensure that you have Administrator access)
At the bottom of the dialog, click the Environment Variables... button
System Variables ➔ click Path ➔ Edit... ➔ New ➔ paste in C:\Users\USERNAME\AppData\Local\Google\Cloud SDK\google-cloud-sdk\bin\ (replace "USERNAME" with your username)
Close and restart any open Command Prompt windows.
Then verify on the Git Bash for Windows console:
Optional: Note that the AppData folder is hidden by default, so you may want to unhide AppData first, to see its contents.
Restart the Git Bash Terminal window
echo $PATH ➔ This should print a long string that contains: :/c/Users/USERNAME/AppData/Local/Google/Cloud SDK/google-cloud-sdk/bin
where docker-credential-gcloud ➔ This should print C:\Users\USERNAME\AppData\Local\Google\Cloud SDK\google-cloud-sdk\bin\docker-credential-gcloud.cmd
I have been following this for setting up a fabric-ca server in my network of 2 organizations, 4 peers (2 in each).
I have two questions:
In the documentation, it says that we can start server locally. When I try to do the same, I'm not able to do it and getting the following error :
fabric-ca-server: command not found . So I tried using a docker image and the server now works as a docker image.
Now when I try to run the fabric-ca-client command, it cannot find the client configuration in the fabric-ca-client home. The FABRIC_CA_HOME environment variable is set as `/etc/hyperledger/fabric-ca-server' in the container. I'm confused as to what I might be missing here.
If you followed the instructions, then the fabric-ca-server executable will be under $GOPATH/bin, you will need to add this to your PATH, via export PATH=$PATH:$GOPATH/bin. Remember to also set FABRIC_CA_HOME.
Assuming you're also using the client natively, it should also be under $GOPATH/bin. In a separate terminal, set FABRIC_CA_HOME to a different path. Then you can enroll the admin user, for example: fabric-ca-client enroll -u http://admin:password#localhost:7054.
The issue is coming because you have not set the GOPATH path.
After cloning the CA repo set the GOPATH to the given directory.
For setting up GOPATH:
(Ubuntu)
If you don’t set a GOPATH, the default will be used.
You have to add $GOPATH/bin to your PATH to execute any binary installed in $GOPATH/bin, or you need to type $GOPATH/bin/the-command.
Add this to your ~/.bash_profile
export PATH=$GOPATH/bin:$PATH
Current GOPATH command:
go env GOPATH
Changing the GOPATH command:
export GOPATH=$HOME/your-desired-path
So. change the 'your-desired-path' to your Fabric-CA repo directory.
You will be facing issue with certain versions of golang. Set the flags explicitly using CGO_LDFLAGS_ALLOW='-Wl,--no-as-needed'
Reference -
Error while running make command using Fabric 1.0.6 after all the 15 steps
https://github.com/golang/go/issues/23739
➜ fabric-ca git:(release-1.0) go get -u github.com/hyperledger/fabric-ca/cmd/...
go build github.com/hyperledger/fabric-ca/vendor/github.com/miekg/pkcs11: invalid flag in #cgo LDFLAGS: -I/usr/local/share/libtool
➜ fabric-ca git:(release-1.0) export CGO_LDFLAGS_ALLOW='-Wl,--no-as-needed'
➜ fabric-ca git:(release-1.0) make
I am installing Jenkins 2 on windows,after installing,a page is opened,URL is:
http://localhost:8080/login?from=%2F
content of the page is like this:
Question:
How to "Unlock Jenkins"?
PS:I have looked for the answer in documentation and google.
Starting from version 2.0 of Jenkins you may use
-Djenkins.install.runSetupWizard=false
to prevent this screen.
Accroding to documentation
jenkins.install.runSetupWizard - Set to false to skip install wizard. Note that this leaves Jenkins unsecured by default.
Development-mode only: Set to true to not skip showing the setup wizard during Jenkins development.
More details about Jenkins properties can be found on this Jenkins Wiki page.
Check https://wiki.jenkins-ci.org/display/JENKINS/Logging to see where Jenkins is logging its files.
e.g. for Linux, use the command: less /var/log/jenkins/jenkins.log
And scroll down to the part: "Jenkins initial setup is required. An admin user has been created ... to proceed to installation:
[randompasswordhere] <--- Copy and paste
Linux
By default logs should be made available in /var/log/jenkins/jenkins.log, unless customized in /etc/default/jenkins (for *.deb) or via /etc/sysconfig/jenkins (for */rpm)
Windows
By default logs should be at %JENKINS_HOME%/jenkins.out and %JENKINS_HOME%/jenkins.err, unless customized in %JENKINS_HOME%/jenkins.xml
Mac OS X
Log files should be at /var/log/jenkins/jenkins.log, unless customized in org.jenkins-ci.plist
open file: e:\Program Files (x86)\Jenkins\secrets\initialAdminPassword
copy content file: 47c5d4f760014e54a6bffc27bd95c077
paste in input: http://localhost:8080/login?from=%2F
DONE
Some of the above instructions seem to have gone out of date. As of the released version 2.0, creating the following file will cause Jenkins to skip the unlock screen:
${JENKINS_HOME}/jenkins.install.InstallUtil.lastExecVersion
This file must contain the string 2.0 without any line terminators. I'm not sure if this is required but Jenkins also sets the owner/group to be the same as the Jenkins server, so that's probably a good thing to mimic as well.
I did not need to create the upgraded or .last_exec_version files.
I assume you were running jenkins.war manually with java -jar jenkins.war, then all logging information by default is output to standard out, just type the token to unlock jenkins2.0.
If you were not running jenkins with java -jar jenkins.war, then you can always follow this Official Document to find the correct log location.
Open your terminal and type code below to find all the containers.
docker container list -a
You will find jenkinsci/blueocean and/or docker:dind if not than
docker container run --name jenkins-docker --rm --detach ^
--privileged --network jenkins --network-alias docker ^
--env DOCKER_TLS_CERTDIR=/certs ^
--volume jenkins-docker-certs:/certs/client ^
--volume jenkins-data:/var/jenkins_home ^
--volume "%HOMEDRIVE%%HOMEPATH%":/home ^
docker:dind
and
docker container run --name jenkins-blueocean --rm --detach ^
--network jenkins --env DOCKER_HOST=tcp://docker:2376 ^
--env DOCKER_CERT_PATH=/certs/client --env DOCKER_TLS_VERIFY=1 ^
--volume jenkins-data:/var/jenkins_home ^
--volume jenkins-docker-certs:/certs/client:ro ^
--volume "%HOMEDRIVE%%HOMEPATH%":/home ^
--publish 8080:8080 --publish 50000:50000 jenkinsci/blueocean
run command
docker run jenkinsci/blueocean
or
docker run docker:dind
Copy and Paste the secret key.
One method to prevent the installation wizard is to do the following in $JENKINS_HOME:
Create an empty file named .last_exec_version
Create a file named upgraded
If left empty, a banner will prompt you to "upgrade" to 2.0 (which just means install a bunch of new plugins like Pipeline)
If the contents of that file is 2.0, you'll receive no banner and it will act like an regular old Jenkins install
Remember, this wizard is in place to prevent unauthorized access to Jenkins during setup. However, bypassing this wizard can be useful if, for example, you want to deploy automated installations of Jenkins with something like Ansible/Puppet/etc.
This was tested against Jenkins 2.0-beta-1 – so these instructions may not work in future beta or stable releases.
In the mac use:
sudo more /Users/Shared/Jenkins/Home/secrets/initialAdminPassword
I have seen a lot of response to the question, most of them were actually solution to it but they solve the problem when jenkins is actually run as a standalone CI without Application container using the command:
java -jar jenkins.war
But when running on Tomcat as it is the case in this scenario, Jenkins logs are displayed on the catalina logs since the software is running on a container.
So you need to go to the logs folder:
C:\Program Files\tomcat_folder\Tomcat 8.5\logs\catalina.log
in my own case. Just scroll almost to the middle to look for a generated password which is essentially a token and copy and paste it to unlock jenkins.
I hope this fix your problem.
Step 1: Open the terminal on your mac
Step 2: Concatenate or Paste
sudo cat **/Users/Shared/Jenkins/Home/secrets/initialAdminPassword**
Step 3: It will ask for password, type your mac password and enter
Step 4: A key would be generated.
Step 5: Copy and paste the security token in Jenkins
Step 6: Click continue
I found the token in the following file in the installation dir:
<jenkins install dir>\users\admin\config.xml
and the element
<jenkins.install.SetupWizard_-AuthenticationKey>
<key> THE KEY </key>
</jenkins.install.SetupWizard_-AuthenticationKey>
You might see it in the catalina.out. I installed Jenkins war in tomcat and I can see this in the catalina.out
The below method does not work anymore on 2.42.2
Create an empty file named .last_exec_version
Create a file named upgraded
If left empty, a banner will prompt you to "upgrade" to 2.0 (which just means install a bunch of new plugins like Pipeline)
If the contents of that file is 2.0, you'll receive no banner and it will act like an regular old Jenkins install
mostly jenkins will show you the path for initialAdminPassword if you dont find it there, then you have to check jenkins logs
in log you will see
05-May-2017 01:01:41.854 INFO [Jenkins initialization thread] jenkins.install.SetupWizard.init
Jenkins initial setup is required. An admin user has been created and a password generated.
Please use the following password to proceed to installation:
7c249e4ed93c4596972f57e55f7ff32e
This may also be found at: /opt/tomcat/.jenkins/secrets/initialAdminPassword
Use a lil shortcut to get to the folder:
cmd + shift + g
then insert /Users/Shared/Jenkins
there u can see the secrets folder - probably shows that it's locked.
to unlock it: right click on the folder and click info + click on the lock at the bottom. now u can change the rights shown at the bottom of the window
hope that helped :)
Greetings, Stefanie ^__^
If unable to find Jenkins password in the location C:\Windows\System32\config\systemprofile\.jenkins\secrets\initialAdminPassword
by installing Jenkins generic war on Tomcat server, try below
Solution:
Set environmental variable JENKINS_HOME to your jenkins path say
JENKINS_HOME ="C:/users/username/apachetomcat/webapps/jenkins"
Place Jenkins.war in the webapp folder of Tomcat and start Tomcat,
initial admin password gets generated in the path
C:\Program Files (x86)\Apache Software Foundation\Tomcat 9.0\webapps\jenkins\secrets\initialAdminPassword
Yet another way to bypass the unlock screen is to copy the UpgradeWizard state to the InstallUtil last execution version, add an install.runSetupWizard file with the contents 'false', and update the config.xml installStateName from NEW to RUNNING.
docker exec -it jenkins bash
sed -i s/NEW/RUNNING/ /var/jenkins_home/config.xml
echo 'false' > /var/jenkins_home/jenkins.install.runSetupWizard
cp /var/jenkins_home/jenkins.install.UpgradeWizard.state /var/jenkins_home/jenkins.install.InstallUtil.lastExecVersion
exit
docker restart jenkins
For reference, this is the command I use to run jenkins:
docker run --rm --name jenkins --network host -u root -d -v jenkins:/var/jenkins_home -v /var/run/docker.sock:/var/run/docker.sock jenkinsci/blueocean:1.16.0
You will also want to update the config with the Root URL:
echo "<?xml version='1.1' encoding='UTF-8'?><jenkins.model.JenkinsLocationConfiguration><jenkinsUrl>http://<IP>:8080/</jenkinsUrl></jenkins.model.JenkinsLocationConfiguration>" > jenkins.model.JenkinsLocationConfiguration.xml
exit
docker restart jenkins
In case, if you installed/upgraded new versions of jenkins and unable to find admin credentials on server then, ...
if you are using old version of jenkins and on the top of it you are trying to reinstall/upgrade new version of jenkins then,
the files under "JENKINS_HOME", namely -
${JENKINS_HOME}/jenkins.install.InstallUtil.lastExecVersion
${JENKINS_HOME}/jenkins.install.UpgradeWizard.state
will cause jenkins to skip the unlock (or admin credentials screen) and webpage directly ask you for username and password. even on server you will not able to find "${JENKINS_HOME}/secrets/initialAdminPassword".
In such case, don't get panic. just try to use old admin user creds in newly installed/upgraded jenkins server.
In simple language, if you have admin creds as admin/admin in old version of jenkins server then, after upgrading jenkins server, the new server won't ask you set password for admin user again. in fact it will use old creds only.
I have found the password in C:\Program Files\Jenkins\jenkins.err. Open jenkins.err text file and scroll down, and you will find the password.
Go to C:\Program Files (x86)\Jenkins\secrets
then with notepad ++ open file initail Admin Password and paste its content.
thats it
-->if you are using linux machine, then login as root user: sudo su
-->then go to the below path: cd /var/lib/jenkins/secrets
-->just view the IntialAdminPassword file ,you can see the secret key.
-->paste the secret key into jenkins window,it will be unlocked.
https://issues.jenkins-ci.org/browse/JENKINS-35981
Try this %2Fjenkins%2F instead of %2Fjenkins in the browser
Open the terminal on your mac and open new window (command+T)
Paste sudo cat /Users/Shared/Jenkins/Home/secrets/initialAdminPassword
It will ask for password, type your password(i gave my mac password, i haven't check if any other password would work) and enter
A key would be generated.
Copy the key and paste it where it asks you to enter admin password
click continue
The problem can be fixed in latest version: mine is 2.4. The error comes because of %2fjenkins%2f in URL. The previous version was coming with %2fjenkins and the same error used to come. They have resolved the issue, but the URL has been changed from %2fjenkins to %2fjenkins%. So as a summary in the URL currently %2fjenkins% is coming. before passing the admin password change it to %2fjenkins. Along with that add a .last_exec_version empty file.
If someone chooses running Jenkins as a Docker container, may face the same problem with me.
Because accessing-the-jenkins-blue-ocean-docker-container is quite different,
Common problem is /var/lib/jenkins/secrets: No such file or directory
You need to access through Docker, the link Jenkins provide is quite helpful.
Except <docker-container-name> maybe not specified, then you may need to use the container ID.
After
docker exec -it jenkins-blueocean bash
or
docker exec -it YOUR_JENKINS_CONTAINER_ID bash
The /var/lib/jenkins/secrets/initialAdminPassword would be accessible.
The password would be there.
I have setup Jenkins using Brew, But when I restarted Mac Jenkins was asking for initialAdminPassword(The screenshot attached in question)
And the problem was it was not generated under sercret directory.
So I'd found the Jenkins process which was running on port: 8080 using: $ sudo lsof -i -n -P | grep TCP and killed it using $ sudo kill 66(66 was process id).
Then I downloaded the latest jenkins .war file from: https://jenkins.io/download/
And executed command: $ java -jar jenkins.war (Make sure you are in jenkins.war directory).
And that's it everything is working fine.
This works well when you are stuck with Docker on Windows and are using Git-Bash
Presuming something like:
# docker run --detach --publish 8080:8080 --volume jenkins_home:/var/jenkins_home --name jenkins jenkins/jenkins:lts
Execute to get the Container ID, for example "d56686cb700d"
# docker ps -l
Now tell Docker to return the password written in the logs for that Container ID:
# docker logs d56686cb700d 2>&1 | grep -A5 -B5 Admin
2>&1 redirects stderr to stdout
-A5 includes 5 lines AFTER the line with "Admin" in it
-B5 includes 5 lines BEFORE the line with "Admin" in it
Output example:
Jenkins initial setup is required. An admin user has been created and a password generated.
Please use the following password to proceed to installation:
47647383733f4387a0d53c873334b707
This may also be found at: /var/jenkins_home/secrets/initialAdminPassword
*************************************************************
*************************************************************
*************************************************************
I found it under below directory. Full issue detail https://github.com/jenkinsci/ibm-security-appscansource-scanner-plugin/issues/2
C:\Windows\SysWOW64\config\systemprofile\AppData\Local\Jenkins\.jenkins
Open jenkins.err file in C:\Program Files\Jenkins\.
In that file check for a hash key after this line
Jenkins initial setup is required. An admin user has been created and a password generated.
Please use the following password to proceed to installation:
And paste it there in the jenkins prompt. Worked for me.
To solve this problem for docker container in Ubuntu 18.04.5 LTS (Bionic Beaver) - Ubuntu Releases
1- connect to your docker server or ubuntu server witch ssh or other method
2- run sudo docker ps
3- copy the container name parameter ("NAMES")
4- run sudo docker logs "your_parameters_NAMES_VALUES"
5- Find the folowing sentence "Jenkins initial setup is required. An admin user has been created and a password generated.
Please use the following password to proceed to installation:" and copy the password
I have latest Jenkins and it's Swarm plugin client jar (2.0).
I downloaded the swarm-client jar and I ran the following command to create the slave: (Note: : I'm using user Anonymous to connect to Jenkins master without requiring username/password and have provided Create Slave permission in Global Roles, and all access in Slave section under Slave roles by creating a new role with pattern swarm.*). Jenkins Swarm client: https://wiki.jenkins-ci.org/display/JENKINS/Swarm+Plugin
A user can provide a valid username/password if that user has Create Slave (Global Roles) and other access like connect, delete, etc in Slave Roles in Jenkins under Manage Roles).
$ which swarm-client.jar
~/tools/bin/swarm-client.jar
$ pwd
/home/confman/slaves
$ ~/tools/jdk1.7.0_60/bin/java -jar `which swarm-client.jar` -name "swarm_`hostname -a`" -fsroot "~/slaves/swarm_`hostname -a`" -master http://jenkins_master.srvr.company.com:8083 -username Anonymous -description "`hostname -a` " -executors 5 -labels "ANSIBLE_CENTOS CENTOS" -mode 'exclusive' -showHostName -t java=~/tools/jdk1.8.0_45 -t gradle=~/tools/gradle-2.3 -t Maven=~/tools/apache-maven-3.3.3 -t Groovy2=~/tools/groovy-2.4.5 --showHostName -retry 0 -disableClientsUniqueId &
But, instead of the above command setting Slave's Remote Root Directory to ~/slaves/swarm_jmeter01, it's setting the remote root path including the folder as prefix/relative to from where I ran the above command (as shown below). In my case, hostname command value is jmeter01.
The documentation doesn't mention that this paramter is relative to the current folder (where you'd run the java -jar slave-client jar command).
Has anyone found a solution for this i.e. it can ignore the current folder and set it to ~/slaves/swarm_01 or something like that?
Obviously In my automation to resolve this issue, I can first "cd" (change directory) to the correct folder ~/slaves and then just pass -fsroot "swarm_`hostname -a`" to get remote directory path value set as: ~/slaves/swarm_jmeter01 (in that case, it'll work fine).
~ is shell expansion ... if this not works, then use $HOME instead
I downloaded and installed Jenkins for Mac OSX on my Macbook Pro (OS: Mountain Lion). I now want to set it up to pull down a project from bitbucket and do an automatic build.
I created the ssh key, added it to bitbucket and tried to setup a build job. However, I get the error:
Failed to connect to repository : Command "git ls-remote -h HEAD" returned status code 128:
stdout:
stderr: Host key verification failed.
fatal: The remote end hung up unexpectedly
I tried to remove the domain causing the problem from known_hosts but am still getting this error.
Please advise.
I think I've found a possible solution in this post: http://colonelpanic.net/2011/06/jenkins-on-mac-os-x-git-w-ssh-public-key/
Jenkins on Mac OS X I just finished setting up a build server on Mac
OS X using Jenkins (formerly Hudson). The company I’m working for
(GradeCam) uses git and gitolite for our source control and so I
expected no trouble using Jenkins to build our tools using the git
plugin.
However, I quickly ran into a snag: the source control server is on a
public address and so our source code is not available except via ssh,
and gitolite ssh access uses private key authentication. Well, I’m an
experience unix sysadmin, so that didn’t sound like a big issue —
after all, setting up public key authentication is childs play, right?
Default install
The default installation of Jenkins on Mac OS X (at the time of this
writing) installs a Launch Agent plist to
/Library/LaunchAgents/org.jenkins-ci.plist. This plist file causes
Jenkins to load as user “daemon”, which sounds fine — except that the
home directory for the “daemon” user is /var/root, same as for user
root. This means that the .ssh dir in there will never have the right
permissions for a private key to be used.
Creating a new hidden user
My solution was to create a new “hidden” user for Jenkins to run
under. Following instructions I found on a blog post, I created a user
“jenkins” with a home directory “/Users/Shared/Jenkins/Home”:
sudo dscl . create /Users/jenkins
sudo dscl . create /Users/jenkins PrimaryGroupID 1
sudo dscl . create /Users/jenkins UniqueID 300
sudo dscl . create /Users/jenkins UserShell /bin/bash
sudo dscl . passwd /Users/jenkins $PASSWORD
sudo dscl . create /Users/jenkins home /Users/Shared/Jenkins/Home/
I then stopped Jenkins: “sudo launchctl unload -w
/Library/LaunchAgents/org.jenkins-ci.plist” and edited the plist file
to set the username to jenkins instead of daemon.
“chown -R jenkins: /Users/Shared/Jenkins/Home”
sets the permissions how they need to be, and then “sudo launchctl
load -w /Library/LaunchAgents/org.jenkins-ci.plist” should get you up
and running!
To get git over ssh running, “sudo su – jenkins” to get a console as
the jenkins user and set up the ssh keys and such. Make sure you can
ssh to where you want to go (or even do a test git clone) because you
need to save the keys so it doesn’t ask for them when jenkins tries to
do the clone.
That should do you! Hope it helps someone.