I am pretty new to Cumulocity and I am trying to get data into the platform from my own device using mqtt and the smartrest templates. I can get data in using the static templates but they only support certain data types. I am struggling to create the appropriate smartrest template in the UI and the documentation doesn't go into much detail.
I get that the template name goes in the MQTT topic (or selected on login as part of the username) in s/ut/template_name and the messageId of the messages in the template get matched to the first CSV field of the MQTT publish payload. What I don't get is the template terminology. In the UI I choose API->Measurement and Method->POST and I am presented with required values $.type and $.time. My questions:
Is $.type the "measurement fragment type" name or do I have to make it "c8y_CustomMeasurement"? Can I call it whatever I want?
$.time has a value field. Is this the default value if one is not supplied in the publish?
I assume I need to add a numerical value in the optional API values. To link it to the value of the data point should I make the key "c8y_CustomMeasurement.custom.value"?
Am I way off base here?
Every time I publish to my own smartrest template the server drops the connection so I assume its an error in my template setup but I don't see a way of accessing debug messages (also nothing is published back to me on s/e or s/dt).
For the sake of an example, lets say I wish to publish a unitless, timestamped pulse count with payload format "mId,ts,value" with example data "p01,'2017-07-17 12:34:00',1234"
What you wrote so far is mostly correct just to be a bit more precise:
The topic is s/uc/template_id (not the template name, this is just a label)
The $.type refers to the 'type' fragment in the measurement JSON. It is a free text field
In 99% of cases you want to leave the $.time empty. If you set something here it is not the default but fixed to that timestamp and you cannot change it when using the template. If you leave it empty and still not send something in
Example: p01,2017-07-17T12:34:00,1234 (no quotes arounf timestamp and ISO8601 format
Example without sending time: p01,,1234 (sending empty string as time results in server time beeing set. The template is the same)
Hope these points help you to find you issue
Related
If I navigate to /rest/api/2/issue/createmeta/PROJ/issuetype/N (in this case, I'm getting Task), the list of fields returned is incomplete. There are a number of customfields that are in use (I can see them both in the tickets themselves, and also in /plugins/servlet/project-config/PROJ/fields ) that are in the createmeta data.
I'm really trying to do this in python jira, where I'm using "expand='projects.issuetypes.fields'" in the createmeta() call, but I figured I'd double-check the results in the rest API directly, and I'm getting the same results there, too.
This is happening in jira 8.20.7.
Essentially, what I'm trying to do, is to programatically get a name/id mapping of all fields in the ticket type. I'm having far more difficulty doing that than I thought there would be. I would do it based on /rest/api/2/field but the jira admins have allowed some duplicated names...
EDIT: I realized that it might be worth noting that some of the fields I'm looking for are coming from a ServiceDesk form, although, as far as I can tell, there's no way to determine that, since one of the missing fields contains the name of the form.
Why are you using createmeta endpoint?
Instead of that, in order to get all of the customfields and their values; just note their id and get the values from /rest/api/2/issue/{issueKey} endpoint.
When you send a GET request to /rest/api/2/issue/{issueKey} endpoint, you will get a JSON object which contains "fields" object in it.
And using the "fields" you can determine all of the values that include system fields (description, assignee, etc.) and custom fields (like customfield_<customfieldid>).
And for a general approach, you may want to look at the field types in that response.
I am working on building a replacement to MIRTH and it looks like we are sending out non-standard HL7 ORU_R01 messages. OBR.5 should be just a single field but looks like we are sending a bunch of other data in this section.
<OBR.5>
<OBR.5.1>XXXX</OBR.5.1>
<OBR.5.2>XXXX</OBR.5.2>
<OBR.5.3>XXXXX</OBR.5.3>
<OBR.5.5>XXXXX</OBR.5.5>
<OBR.5.6>XXXX</OBR.5.6>
<OBR.5.7/>
<OBR.5.8>XXXXXXXXXX</OBR.5.8>
<OBR.5.10>XXXXXXX</OBR.5.10>
<OBR.5.11>X</OBR.5.11>
<OBR.5.12>X</OBR.5.12>
<OBR.5.13>XXXXX</OBR.5.13>
<OBR.5.15>XXXXXXX</OBR.5.15>
</OBR.5>
It seems like I should be able to something like the following.
obr.getObr5_Priority().getExtraComponents().getComponent(2).setData(...)
But I am having issues trying to find the correct way to set the different segments. All the fields are Strings.
Found something that I think has ended up working for us.
ID expirationDate = new ID(obr.getMessage(), 502);
expirationDate.setValue(format2.format(date));
obr.getObr5_Priority().getExtraComponents().getComponent(0).setData(expirationDate);
Where 503 refers to which element you want to set. In this case I am trying to set OBR-5.2. getComponent(0) because it's the first extra component I am adding for this particular segment. I am not sure entirely if my explanation here is correct but it creates a message we need and parses as I'd expect so its my best guess.
Dereived the answer from this old email thread https://sourceforge.net/p/hl7api/mailman/hl7api-devel/thread/0C32A03544668145A925DD2C339F2BED017924D8%40FFX-INF-EX-V1.cgifederal.com/#msg19632481
I am trying to find the correct template and id to use for a hotprint of an advanced pdf template of an Item Fulfillment.
The hot print url is (with the id bolded) https://system.na3.netsuite.com/app/accounting/print/hotprint.nl?regular=T&sethotprinter=T&id=7600&label=Packing%20Slip&printtype=packingslip&trantype=itemship&orgtrantype=TrnfrOrd&auxtrans=7605
For some reason only certain id=# seems to affect the outcome and the ids I have got to work for two different templates don't match the Custom Transaction Forms ID or the Advanced pdf script id. (example most ids=template 1, while 168,4954, and seemingly random other ids=template 2) I am very confused on how netsuite resolves the hot print url as it normally doesn't include the template= part though I have seen others use it for invoice print urls.
The parameters at the end of the url (the stuff after the ?) are used by Netsuite to control settings used by the webpage which prints the PDFs for you.
In this case, &id=##### refers to the internal id of the document you are printing. You can see this by going to the document, right clicking, selecting inspect, and typing nlapiGetRecordId() into the console. When you click Print, you should see that same number after &id=#####.
&template=### refers to the template you are printing. If you go to Customization -> Forms -> Advanced PDF/HTML Templates, you'll notice a Script ID field in the table. If you substitute the correct Script ID in for the number in &template=###, you'll notice you generate the same PDF. This Script ID acts the same as the number that was previously there.
The reason you're seeing unusual results when you change those numbers is because you're mismatching a record with a template not built for it. So it won't print exactly right, but will sometimes execute anyways.
Anyways, this sort of parameter scheme is a similar scheme to how Suitelets and Restlets work, so in the future, you might experience this sort of thing again.
EDIT: For those reading this in the future, please read the comments.
To customize a packing slip and return form:
If you are printing packing slips and need some customization, you can use a custom invoice form when printing packing slips. For example, you can customize an invoice form to hide the fulfilled item tax rate and amount, and the order total. Then, when you print the packing slip using the custom form through mass print, choose the the packing slip shows the customized information.
I have a FIX application which is connected to several price providers. It distributes the data it received to our inner applications. When it is sending the received messages from the price providers to the target applications, it modifies the SendingTime(52) field in FIX header which is not acceptable. The inner applications want to get the original SendingTime value. How can I say to the QuickFIXJ engine not to assign a timestamp value?
Thanks
What you desire... is kind of wrong. Header fields are to be used by the engine, and for application data (which is what this relayed SendingTime kind of is on the second leg). Your inner FIX connection should not be clobbering the SendingTime field. You might need the actual SendingTime field if you are diagnosing problems with your inner connection!
What you really need is a second SendingTime field. You should edit the DD of your inner FIX applications to add another field for which to store the old SendingTime value. Tell your inner target apps to refer to that field.
NOTE: You probably don't want to use OrigSendingTime (tag 122) for this. That field has a very specific usage already. Name your new field something else.
FIX Market Data messages (35=W, 35=X) usually have MDEntryDate (#272) and MDEntryTime (#273) fields to represent the timestamp of the market data price. If it is related to Quote/trade messages, you may have the TransactTime (#60) field.
It worth keep the SendingTime (#52) and MDEntryDate MDEntryTime/TransactTime separated, you can compare the difference between the price's timestamp and the counter party's infra structure timestamp (sending time). It would help to identify delay between the systems.
If the message you are handling does not have any Application DateTime field, you can pick one. which its value would be the SendingTime for the original FIX message you've received.
You can either select and use an existent field (http://www.onixs.biz/fix-dictionary/4.4/fields_by_name.html) or you can create your own user defined field.
Once you decided to create your own field, it is a good practice to check the oficial Global Technical Committee user defined fields list at https://www.fixtrading.org/standards/user-defined-fields/ and using the user defined fields range.
Sites
Fields by message: https://www.onixs.biz/fix-dictionary.html
User defined fields: https://www.fixtrading.org/standards/user-defined-fields/
I'm developing some reports for Main Page in Dynamics Ax, however the problem i've got is connected with SSRS. Typical scenario i have report A and report B, i need to open report A when clicking on report B. Opening report itself is correct, but passing parameters is more tricky. After some research i got to the point when I want to run report A in browser using the adress
http://(server address)/Reports/Pages/Report.aspx?ItemPath=/Dynamics/Reports.VendorsOpenTransactionsCount.AutoDesign1&rs:Command=Render&VendOpenTrans_dataAreaID=dor&VendOpenTrans_p1=2011-07-21&VendOpenTrans_p2=2011-07-21
and then i get report displayed(main window) but non of the parameters are validated into proper textboxes, and changing the value of them doesn't have any impact.
can anyone here help me with that "challenge"
Actually, I believe the critical difference is whether you are passing parameters (via URL) to a report that is using database engine or the SSAS - the analytical engine as a data source.
If your data source is the analytical engine then your parameter should be given in the 'dimension format', rather than in the precise format, like &parmname=140, etc. Allow me to explain using specific example and using SSAS data source for this illustration (there is plenty of solutions available on the net for the database engine based solution, including Microsoft postings).
My server name is FRELASM.
So, I have SSAS data source called DealerSource (not visible here).
I have parameter defined in the parameter's section of the SSRS as: #DwDimDealerCorpDlrNbr
In SSAS I have the following dimension:
[Dw dim Dealer] that has attribute: [Corp Dlr Nbr] ==> giving: [Dw dim Dealer].[Corp Dlr nbr]
What I want is to show a report for a single dealer 'number' (but it is a text field, hence the leading zeros) equal to 00140. So, I am looking for Corporate dealer number=00140.
The parameter passing DOES NOT WORK if I use this [this would be find against database engine, but it does not work with SSAS).
What you need is this:
replace constant 00140 with [dimension].[attribute].[value]
do not use & character, rather replace it with: %26.
So, the working version is this.
Can you take a look at this page: http://msdn.microsoft.com/en-us/library/ms155391.aspx
It explains about when you can pass parameters via URL. Maybe your parameters are not set to Prompt for user input. HTH.